0
votes
0answers
15 views

Cannot get full resolution with Geforce 210

I have GeForce 210 on Ubuntu 13.10 connected with HDMI to a 29 AOC display. The display can do 2560x1080 resolution, the maximum resolution the video card can provide is 2560x1600. However, the best ...
0
votes
0answers
33 views

Moving window is slow and tearing after installing Nvidia driver

When I installed Ubuntu 13.10, the Nouveau driver was on it. Everything was fine, windows moved very smoothly with my 144 Hz monitor. Now I installed the latest driver from xorg-edgers and after ...
1
vote
1answer
86 views

Nvidia DVI/VGA problem

I have a Nvidia GT 630 with two LG Flatron E2242 screens connected. One of them is connected with a DVI/VGA connector because the card has 1 DVI and 1 VGA output. The driver (got the latest one) ...
0
votes
0answers
18 views

How to change min desktop resolution

I'm trying to use my MSI GT70 with my old tablet Wacom PL-550. My problem is that each attempt to install Nvidia driver on the laptop resulted in a unbooteable system, and that in current ...
0
votes
1answer
46 views

Failed to get size of gamma for output default when trying to add new screen resolution

I'm trying to adjust resolution on my new MSI GT70 2OC. In settings, only one resolution is available: 1920x1080. This is fine, except that I need to decrease the resolution and make it more ...
0
votes
0answers
34 views

Dual Monitor Resolution Incorrect Depending on Video Output Port Used

I am using Ubuntu 13.04, a 27" 1920x1080 HD monitor, and a 22" 1680x1050 secondary monitor, and have an nVidia GeForce GTX 550 Ti/PCIe/SSE2 graphics card. The card has 2 DVI ports, and an HDMI mini ...
0
votes
0answers
43 views

Can't set resolution higher than 1360x768

I have tried to look up fixes but none of them seems to work My first problem is that my screen is not recognized, it is an AOC 2436Vwa 24". Out of the box ubuntu could not select a higher resolution ...
0
votes
1answer
137 views

How do I get a Dell U2414H monitor and Nvidia NVS300 working?

I can't get Ubuntu 12.04 LTS to run xwindows in my monitors native resolution. I have a Dell U2414H monitor and NVIDIA NVS 300 video card. I am connected via a Single Link DVI to HDMI cable. When I ...
0
votes
1answer
64 views

12.04 nvidia graphics resolution problem

I am trying to use OpenGL on my laptop, a Dell Inspiron n5110 with Nvidia GeForce GT 525M. I managed to install my graphics card by using the following commands: sudo apt-add-repository ...
0
votes
0answers
53 views

QNIX Nvidia Display Issue with 331 Driver and 770

Upon trying to get my ubuntu 13.10 installation working on my new computer, I encountered an issue with the proprietary nvidia drivers and my display. Apparently, the two don't agree with each other ...
0
votes
1answer
63 views

How to change Nvidia graphic resolution in Ubuntu 12.04?

I ran this command in the terminal: sudo service lightdm stop After that the only resolution that I have is 640*480! My screen's resolution is 1366*768 in windows. How can I set the resolution to ...
0
votes
0answers
55 views

Resolution problem with Nvidia GT 620

So today my computer needed a reboot and when it booted back up my resolution had changed. It used to be either 1280×1024 or 1400x900 I can't remember but now after fighting with the GUI display ...
1
vote
1answer
100 views

Ubuntu 13 doesn't have an option for screen resolution 1600x900 for NVidia graphics

I am looking for a way to configure my display to the correct resolution of 1600x900. When I initially installed Ubuntu 13 the display resolution was perfect but after a few updates it now only gives ...
0
votes
0answers
20 views

Please help !! video card prb ubuntu 13.04

I have ubuntu 13.04 + kde 4.11 and two nvidia cards. One onboard nForce 980a/780a SLI and one Nvidia GTX 280, both of them are connected to one TV- LG 109'. GTX 280 is connected from cable dvi+hdmi ...
0
votes
0answers
155 views

How do I get 4K output resolution with GTX760 on Ubuntu Desktop 13.10?

I have a Nvidia GTX760 with drivers installed. How do I get the option to go up to the 4K output resolution? I am only getting 1920x1080 and below options and I have a 39" Seiki 4K display. ...
1
vote
2answers
185 views

Bad screen resolution on full screen apps/games ubuntu 13.10

my problem started after I upgraded to 13.10 from 13.04. Any time I try to play 7 kingdoms or use WINE in full screen it gets set to an out of range screen size. How would I go about setting the ...
1
vote
0answers
106 views

Low Screen Resolution

The max I can set my resolution currently is 1024x768, but my laptop's native resolution is 1920x1080. I've always been able to set it to 1920x1080 without issue, but since I broke my video driver (I ...
1
vote
1answer
186 views

Dual 2560x1440 resolution problem

I have 2 2560x1440 displays (HP ZR2740w), and a GeForce GT610 card with two dual dvi outputs and 1GB of RAM. I can get full resolution on either screen and 1/4 on the other but not full resolution on ...
1
vote
1answer
84 views

Kubuntu 13.10 changing x mode after login

I have a QNIX 2710 monitor which reports bad EDID. Using the nouveau module the screen works fine @ 2560x1440 however the performance isn't ideal so I wish to use the nvidia binary. I have installed ...
0
votes
0answers
54 views

overscanning acer x163 and nvidia, x server setting do not change

I'm getting vexed with lack of friendly display options, I've tried all sort of things but I can't seem to stop my monitor overscanning horizontally (I.E missout just enough screen that scroll bars ...
0
votes
1answer
58 views

Low Resolution on Boot, not Login

Ok, here goes: When I was installing Nvidia drivers and Bumblebee for my 780m Optimus laptop, the Intel driver somehow made my display undetectable, making X output in the lowest resolution it could ...
0
votes
1answer
96 views

Dual monitors resolution reset on each restart

Environment: OS: Xubuntu 13.04 Linux kernel: 3.8.0-35 Nvidia driver version: 313.30 GPU Name: GeForce GT 630 Monitors: Dell U2312HM. Connected to DVI port of video card (without any adapter). LG ...
0
votes
0answers
94 views

low screen resolution after installing bumblebee

I installed bumblebee and on reboot, I had lost the screen resolution I had before. I have tried uninstalling bumblebee and also deleted the xorg.conf file but I am still stuck with the low ...
0
votes
0answers
206 views

Troubles with Screen Resolution, Nvidia on Ubuntu 13.10

I have been reading and searching for a while trying to change my screen resolution on Ubuntu from 1360x768 to 1920x1080. I have a NVIDIA Geforce GT 620 graphic Card and I just recently finished of ...
1
vote
1answer
188 views

Display Driver and Resolution Issues

I'm recently installed Ubuntu 13.10 on my PC and it was working fine. However, I was messing around with Conky (the system resource monitor) and was having some issues. I did a little research and ...
0
votes
1answer
119 views

problem with installing nvidia-173 driver ubuntu

My graphics card is a GeForce fx5200. After installing the nvidia drivers, the resolution of my pc monitor is limited to 640x480 and 320x240- I installed the packages nvidia-173, nvidia-173-updates ...
1
vote
0answers
71 views

WINE & Nvidia resolution

I am having issues running games on Wine. In Ubuntu my native resolution is 1600x900 and I have the Nvidia 3.19 drivers, yet when games load under Wine (version 1.7) they default to 1028x768 ...
1
vote
0answers
210 views

Kubuntu's TTY resolution too low after installing nvidia-current

After installing Kubuntu on a Notebook with GeForce Go 6100 graphics card, the tty's were working correctly, but the KDE desktop wouldn't display anything correctly. After installing the nVidia driver ...
0
votes
0answers
65 views

Ubuntu 13.04 misssing resolution

My Ubuntu 13.04 installation has only 2 options for its resolution 640x480 800x600 after the check with command xrandr in the terminal xrandr: Failed to get size of gamma for output default ...
0
votes
0answers
77 views

Add custom resolution to dual monitor setup ubuntu 13

I switched from Windows 8.1 to Ubuntu and now I have a resolution problem, before I had 2 * 1280x1024 now one is 1280x1024 and the other one 1152x864 I tried some console commands as shown below: cvt ...
0
votes
0answers
56 views

wrong resolution on an attached projector to desktop pc (with nvidia gpu, set as “twinview”)

I have an NVIDIA Quadro FX 1800 gpu on a ubuntu 13.04, with driver v.319 . The primary monitor (res. 1280x1024) is connected to the display port of the card (1 or the 2). The gpu has a DVI output , ...
0
votes
1answer
233 views

Ubuntu 13.10 font problem on 30" Dell U3014 at 2560x1600

I have 13.10, with a Nvidea 8600GTS, driver 304.88, xserver 1.14.3, working fine with 2x 24" 1920x1200 screens in twinview. I have swapped one out for a Dell U3014 but whilst getting the reported ...
0
votes
1answer
58 views

Missing cursor in ubuntu 1

I am using ubuntu 13.10 and I wanted to install NVidia drivers. I had few issues so I have chosen the way of X server settings. But again, some problems 'cause the conflict between Niveau and Nvidia ...
0
votes
0answers
475 views

Fullscreen WINE/PlayOnLinux game creates a scrolling “virtual desktop”

Specifically, I'm trying to run StarCraft 1 in PlayOnLinux, under Linux Mint MATE 16 with recommended proprietary nVidia drivers v310, on a GT9500. Everything works fine except for two issues: 1) ...
0
votes
0answers
115 views

Can't change resolution higher than 1152x864 xrandr gives me error

I just installed 12.04 LTS (after having troubles with 13.10), and I can't set the resolution of my second screen higher than 1152х864, even though the monitor can support 1280x1024. When I try to add ...
0
votes
0answers
39 views

Random flashing horizontal bars when using NVIDIA binary driver

I'm having an interesting (read: I'm ready to pull my hair out because of this) issue with my EVGA GeForce 8400 GS graphics card under Ubuntu. I'm trying to use a DVI to HDMI converter that will also ...
0
votes
1answer
156 views

I used Bumblebee to ruin my display resolution. How can I change it back to default settings?

I have an Nvidia 470 and Ubuntu looked great OOB. I tried Bumblebee to install Nvidia drivers, and the resolution went from great to lousy. How can I change my resolution back to the default, ...
1
vote
1answer
418 views

Ubuntu 12.04 resolution stuck on 640x480

I am new to Ubuntu and I was trying to get my HDMI enabled TV to work with my Ubuntu 12.04 computer and I installed a Nvidia driver using the "additional drivers" program. After that didn't work, I ...
0
votes
0answers
243 views

can't change screen resolution after install nvidia driver

I try to install nvidia driver in my laptop, Acer V5, with Nvidia optimus (Nvidia+Intel). I also try to install nvidia-prime so the nvidia vga card can be used. After reboot, the screen resolution ...
1
vote
1answer
2k views

Wrong display configuration used by LightDM in Ubuntu 13.10 when laptop lid is closed in docking station [duplicate]

Since upgrading to Ubuntu 13.10 on my laptop (actually to Xubuntu as I switched to XFCE) I'm running into problems with LightDM: I use two external displays (one 24" and one 22" display) connected to ...
0
votes
0answers
627 views

13.10 ViewPortIn Display/Resolution Issues

This is my first it posting. I am having issues setting a resolution that is persistent when rebooting/restarting the xserver. I am running 331.17 as my driver, i have tried the other drivers as well. ...
0
votes
0answers
117 views

Resolution changes after resuming from standby and sometimes at login screen

I have installed the proprietary driver for my nVidia Geforce GT 630, however after i resume my computer from standby the resolution changes to 1024x768 while my monitor maximum resolution is ...
0
votes
1answer
618 views

Cannot establish maximum resolution on ASUS PB278Q

I've recently bought brand new ASUS PB278Q monitor. When trying to connect to my laptop, everything works great, except that I can't get the native resolution of my monitor (2560x1440) working. The ...
0
votes
1answer
120 views

Can I workaround an unrecognized display?

I have an Epson Powerlite 8350; it's not recognized on my laptop, which has an nVidia Quadro 2000M and Ubuntu 13.10, so that the screen resolution is limited to 1024x768. This happens with both the ...
0
votes
0answers
131 views

Not working 635M Nvidia drivers in Ubuntu 12.04

I've been having a nightmare trying to install the 635M Nvidia drivers in my Asus N46VJ. I've install bumblebee and follow a bunch of suggestion from many places, I think maybe all the attempts I've ...
1
vote
0answers
212 views

My screen is bigger than my TV, how can I change the size?

I'm running Ubuntu on a Mid-2010 Mac Mini with in-built Nvidia 320M graphics, it's connected to a 32" LCD TV via HDMI cable. The edges of the screen are 'cut off' somewhat, and changing the resolution ...
1
vote
1answer
25k views

Drivers for Ubuntu 13.10 [closed]

I just installed Ubuntu 13.10, my screen resolution is not fitting my screen as the ubuntu interface is all around stretching over the screen, so i thought i might install nvidia's driver that i know ...
4
votes
1answer
795 views

wrong resolution/refresh rate output after upgade to 13.10

I have a custom xorg.conf (need it because my lcd doesn't report it's correct capabilities) that worked fine in 13.04 but since upgading to 13.10 the lcd is incapable of displaying the output from x. ...
5
votes
1answer
7k views

You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server

Im using Kubuntu 13.04 64-bit on my Dell Inspiron 17R laptop. $ lspci|grep VGA: 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) ...
0
votes
0answers
62 views

What is an affordable three monitor GPU which is compatible with Ubuntu?

I painfully found out that I can't run a three monitor setup in Ubuntu with my cheap dual AMD HD 5450 cards. It's also having a hard time with two monitors with random flickering pixels. I'm not ...