0
votes
1answer
14 views

Troubleshooting refresh rate

I have been having problems with my refresh rate and it's recommended and default rate is 60ghz. It keeps flickering at every rate I put it. Does anyone have ideas how to resolve this? thank you
1
vote
0answers
31 views

Mirroring screen -> resolution problem

I have a ASUS N53S laptop, it has a 1920*1080 resolution build in screen. If it matters: GPU is Nvidia GeForce GT 550M. It has a VGA port which I don't/rarely use and a HDMI port. In my HDMI port I ...
0
votes
1answer
51 views

Dual-monitor setup; one monitor changes to low resolution

Dear AskUbuntu Community, I am using Ubuntu 13.10 at work with dual-monitor display. One has 1920x1080 resolution and the other 2560x1440 (main), the graphics card is Radeon 7570 1GB. The main high ...
0
votes
0answers
52 views

Setting the monitor resolution in Lubuntu 14.04

I would like to enquire on how to change the monitor resolution in Lubuntu 14.04 in a permanent manner. The monitor settings under Preferences in the menu does not do the trick. When I say I want to ...
1
vote
1answer
46 views

external monitor can't display max resolution

I had been using an external monitor, an old Dell Inc. 19" with Ubuntu 14.04 for a while now, The resolution it displayed at was something like 1366x768 or 1366x1024, I can't remember exactly which ...
0
votes
1answer
66 views

Resolution problems Ubuntu 14.04

I have Ubuntu 14.04 and everything is working fine exept for the resolution, my monitor supports 1440x900 but in the options only allows 800x640 and 1024x768, I tryed the xorg.conf solution and it ...
0
votes
0answers
48 views

How do I get other resolution option other than default one in full screen? [duplicate]

I want to get my 1366x768 monitor to have other screen resolution 800x600 or 1240x768 in full screen. What option do I have? Thanks. Here what I did, shaharil@busuk:~$ xrandr Screen 0: ...
0
votes
0answers
49 views

Slow Desktop Frame Rate with 1920 x 1080p Monitor

I'm kind of new to this Ubuntu thing, but I've used it before a little bit! So I installed Ubuntu 14.04 LTS, and everything installed normally. On my 15" Acer Monitor everything ran normal! The moment ...
0
votes
1answer
114 views

How to change Monitor of ubuntu box Also 'Out of Frequency ' Error due to monitor change

I have find very odd and crude solution to this entire episode. It is as follows Start installing ubuntu as usual. Switch off the monitor Wait for some time (1-2 minutes) till the HDD access stops ...
0
votes
0answers
17 views

Custom resolutions for games

I have created a custom resolution (1840x1000) to be used with my HDTV to combat overscan. My TV is a Technika x22/14a and does not have a setting to turn off overscan. I am building a gaming PC ...
3
votes
3answers
729 views

Ubuntu 14.04 - Add Fake Display when No Monitor is Plugged In

I have an Ubuntu 14.04 server that has no external monitor connected. I use NoMachine to remote control the machine. When I do so, the Unity/Gnome interface doesn't see any monitors connected, so I ...
0
votes
0answers
43 views

Only 2nd Monitor, not Notebook display, visible

I am trying to install Ubuntu 12 on my notebook, Acer Aspire 7715Z. On boot up, system recognises Ubuntu and loads up installation screen. A few pages of white text roll down the screen and then the ...
0
votes
0answers
43 views

Poor video quality 12.04

Using both a Dell 17" monitor and a HP 1740 I get bad video quality with a Ubuntu 12.04 machine. I tried all of the resolution settings with the monitors, but the fonts are multi-colored and smaller ...
0
votes
0answers
36 views

How to make 13.10 see a monitor when there is none?

I have Ubuntu 13.10 installed on a Dell PowerEdge 1850 server that I start up in the afternoon and shut down at night. When it can't see a monitor, it defaults to 1024x768. When I hook up a monitor by ...
0
votes
0answers
100 views

How can I crop a 1920x1200 monitor to 1920x1080?

I have a 1920x1200 monitor, and have some situations where I want to force the output to the more common 1920x1080. However, I don't want to distort the output, and would prefer a "cropping" black bar ...
0
votes
1answer
341 views

How do I get a Dell U2414H monitor and Nvidia NVS300 working?

I can't get Ubuntu 12.04 LTS to run xwindows in my monitors native resolution. I have a Dell U2414H monitor and NVIDIA NVS 300 video card. I am connected via a Single Link DVI to HDMI cable. When I ...
0
votes
1answer
151 views

QNIX Nvidia Display Issue with 331 Driver and 770

Upon trying to get my ubuntu 13.10 installation working on my new computer, I encountered an issue with the proprietary nvidia drivers and my display. Apparently, the two don't agree with each other ...
0
votes
1answer
43 views

Display configuration messed up

I have a laptop and an external monitor. I can set the correct resolution for both of them, however, after some time configuration messes up: resolutions get swapped and display mirroring turns on. ...
0
votes
0answers
36 views

Input not Supported

I have installed my first copy of Ubuntu on an older PC. Everything seemed to go well with the installation. But at the first boot, my screen gives the message: input not supported. I have tried ...
0
votes
0answers
72 views

overscanning acer x163 and nvidia, x server setting do not change

I'm getting vexed with lack of friendly display options, I've tried all sort of things but I can't seem to stop my monitor overscanning horizontally (I.E missout just enough screen that scroll bars ...
0
votes
1answer
180 views

Resolution not in xrandr and make new Resolution permenent?

I am using a monitor which its native (optimal) resolution is 1600*900. but xrandr doesn't show any resolution above "1024x768". I can change to my native resoution by issuing these 3 commands: ...
0
votes
0answers
82 views

No matter what I think of trying Starcraft 1 refuses to run fullscreen

Everything I have thought of doing to try to get Starcraft 1 to run in fullscreen WITH DUAL MONITORS without wine disabling my monitor that isn't running the game has seemed to not work so far these ...
0
votes
0answers
78 views

23" screen on 13.10 not filling to the corners

hi guys i installed ubuntu 13.10 this morning and have found the screen isnt being used corner too corner, i have the black around the outside is there a way to scale this up? im currently running at ...
0
votes
1answer
133 views

How can I prevent wine from disabling/shutting off my “secondary” monitor?

I'm running my computer using dual monitors. As when I am gaming I call my right monitor my "primary" and my left the "secondary" because I've set my PC up to where fullscreen games load on my right ...
0
votes
0answers
103 views

maximum screen resolution isn't the native resolution

I decided to build a new, small form factor pc, which was going to run Ubuntu. Now the problem with it, is that the maximum possible resolution, is 1024x760, but that the screen I'm using, has ...
0
votes
0answers
77 views

Ubuntu on Mac Mini Monitor Display

I have Ubuntu installed in two machines: a laptop and a Mac Mini. While in the Laptop the screen is fine, on Mac Mini the resolutions option showing are only two and neither match perfectly well. ...
0
votes
0answers
17 views

Could not apply the stored configuration for monitors [duplicate]

I'm using Ubuntu 13.10 with 2 monitors. I woke up, started my Computer, and BUM! I can't start system with cause "Could not apply the stored configuration for monitors" and I can't do anything... ...
0
votes
0answers
61 views

How do I toggle screen geometry with hotkeys?

My main computer is a laptop with an external monitor and I need set up hotkeys to switch between two display modes: external monitor only (1920*1080) internal + external monitor (1280*800 + ...
0
votes
0answers
87 views

how can I change ubutnu to low resolution (VGA) mode

my TV won't work with ubuntu it just blacks out and says not support I remember it did this with windows also but I just had to switch to low resolution mode I really want to start using ubuntu but ...
0
votes
1answer
325 views

Driving a WQHD (2560x1440) Viewsonic monitor with Ubuntu - what is needed?

I just got a Viewsonic VP2770 monitor. Its maximal resolution for either DVI or Display Port is 2560x1440, and I'd like to set that. However, my current laptop is old, and doesn't have neither DVI nor ...
1
vote
0answers
77 views

How to keep the open windows in the right workspace while changing/rotating monitor?

when I plug in/out an external monitor monitor, or I rotate the laptop monitor, the windows/applications open in the several workspaces often mess up, such as in the following figure: How can ...
1
vote
0answers
201 views

I can't get over a resolution of 640x480 after upgrading to 12.04, how can I fix it?

Ever since I upgraded to 12.04 my screen resolution has gone down to 640 x 480, even though I had higher resolutions before. $ xrandr xrandr: Failed to get size of gamma for output default Screen 0: ...
0
votes
0answers
391 views

Problem in ubuntu 13.04 with screen resolution

I have a bad resolution for my monitor that appeared when I installed Ubuntu 13.04 If I run -xrandr I get 1280x1024 0.0* 1024x768 0.0 800x600 0.0 1152x864 0.0 ...
0
votes
1answer
105 views

Monitor resolution isn't selectable

I've got a 2560x1440 monitor, connected with a dual-link DVI cable. When I boot into Ubuntu 13.04, the resolution is 1600X1200 by default, and in Systems Settings->Displays, the highest resolution ...
0
votes
1answer
123 views

Letters in native mode seem too small on my monitor

I have a problem. I have a lg monitor flatron w2242s and my graphic card is Nvidia GT 220. Native resolution for my monitor is 1680x1050, but when I use that resolution it feels like "sand" in the ...
0
votes
3answers
804 views

Screen resolution problems on Samsung monitor

I have a monitor Samsung 19' which resolution is 1440x900 (16:10 aspect ratio). When I set it in the recently installed Ubuntu 13.04, the bottom of the screen gets cut out Trying to change to another ...
1
vote
2answers
1k views

why is my second monitor stuck on 4:3 at 1024X768

I have been using a second monitor for a while now, and until I connected it to our TV via the VGA port everything went well. Then, yesterday morning, after I unplugged the VGA cable from the TV and ...
3
votes
4answers
1k views

Removing the Black Bar at the Top of the Screen [New Found!]

[New Found!] 1. When I set to others instead of 1440x900 (16:10) or 1280x800 (16:10) revolutions, the black bar must disappear. 2. When I set to 1440x900 revolution, the black bar must exist. ...
0
votes
1answer
397 views

Adding a large asus monitor resolution

I am trying to set up this monitor: http://commercial.asus.com/product/detail/vs247h-p-lcd-monitor I am able to connect the monitor and use it in various screen configurations, but have not yet been ...
0
votes
1answer
189 views

Desktop doesnt' load after installing ATI Driver [duplicate]

I installed ATI Radeon HD 3650 on Ubuntu 12.10, 32-bit using following commands: cd lib/3.5.0-17-generic/kernel/drivers unzip *.zip chmod +x *.run sudo ./*.run but after restarting the system, I ...
0
votes
1answer
354 views

Can't extend desktop to second monitor

I have a Vostro 200, Intel Pentium D (E2160) processor and Intel G31/G33 video adapter. The video adapter is integrated and I'm using a VGA splitter to connect to monitors. The monitors are Samsung ...
0
votes
1answer
1k views

Trying to get 2560x1440 resolution

1I have this motherboard and this monitor. It is supposed I could get 2560x1440 resolution using HDMI 1.4, but i don't know how.. NOTE 1: I have a HDMI cable and a DVI-HDMI adapter, I don't know if ...
1
vote
0answers
199 views

Larger resolutions on VGA monitor using GMA 3150

I tried to connect a VGA monitor to my Netbook to increase resolution. Unfortunately, in Lubuntu maximum available resolution is 1024x768, while in Windows I can increase it to 1680x1050. Is there ...
2
votes
0answers
213 views

Lower resolution with DVI and NVIDIA driver than with VGA [duplicate]

First my setting: Machine: Linux ubuntu 3.2.0-36-generic #57-Ubuntu SMP Tue Jan 8 21:44:52 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Graphic Card: I have an old Quadro NVIDIA card 01:00.0 VGA ...
2
votes
0answers
163 views

How do I change the maximum resolution of my computer for multiple monitors?

I am trying to enable three monitors for my setup in Ubuntu 12.10. My card is a Raedon 5700 HD series. When I try to extend my display to any additional monitors, I get the following error: required ...
5
votes
1answer
831 views

How to increase the default screen resolution without a monitor plugged in

i have kinda problem with setting my resolution on ubuntu 10.04 the thing is that i installed the machine and put it away without mouse, keyboard and monitor (i am currently remote with VNC viewer) ...
1
vote
0answers
170 views

Ubuntu 12.04 resolution and GPU

I am seeking help concerning my resolution. I have a Geforce SPARKLE 6600 LE card with nvidia driver 304.64, current for my card, installed with an HP w1707 monitor on a compaq presario PC, 32bit ...
0
votes
1answer
251 views

Unsupported monitor resolution after upgrade from 10.04 LTS to 12.04 LTS

Upgraded my server from Ubuntu 10.04 LTS to Ubuntu 12.04 LTS as per update manager suggestion. I was running 1920 X 1080 under 10.04. Now the video card is set outside the capabilities of the ...
1
vote
1answer
4k views

How to force a higher screen resolution from Ubuntu 12.04 and an NVidia GTX460?

I'm running Ubuntu 12.04 x64, kernel 3.2.0-24-generic with an NVidia GTX460 and an Achieva Shimian QH270-Lite 2560 x 1440 monitor connected by a dual-link DVI cable. I've installed the ...
0
votes
1answer
933 views

Stuck on extremely low resolution 800x600; Native Resolution 1680x1050

I know this has been touched on by a lot of different threads by a lot of different people, but I can't for the life of me figure out how to fix it. I'm on a duel boot Windows 8/Ubuntu system and ...