NetworkManager is a set of co-operative tools that make networking simple and straightforward.

learn more… | top users | synonyms (1)

2
votes
1answer
73 views

How can I configure the default transmission rate for 802.11 (“WiFi”)?

I need to lower the transmission rate of my IEEE 802.11g network interface controller to have acceptable an packet loss ratio (< 0.5 %), otherwise it becomes very high (> 50 % is typical, but it ...
0
votes
0answers
101 views

Lubuntu nm-applet fails to start

I thought this was fixed back in 2014 but it has popped up again. After some recent updates, the nm-applet in the LXPanel has once again failed to appear. The last time this happened after the ...
2
votes
3answers
269 views

Nslookup resolves search domain but ping does not (14.10) [duplicate]

At my company, many of our configuration scripts, etc use just the server name. For example, http://server rather than http://server.company.com. I have configured the search domain in the GUI Network ...
0
votes
0answers
25 views

Cannot connect to VPN Ubuntu 14.04 [duplicate]

I have installed vnpc and network-manager-gnome and have created a new vpn connection for my workplace with credentials I know are working for others. When I try and connect, I get an instant 'VPN ...
0
votes
1answer
126 views

How to permanently remove unused/unwanted access points appear in the network menu item Ubuntu 14.04

As shown in the image below, all the access points above the connected network are unused. I want to remove this unused entries from the menu indicator. And I have already tried the solution ...
0
votes
1answer
56 views

IPv4 is not getting configured on Ubuntu in a dualstack (IPv4/IPv6) network

I set up a router with IPv6 capabilities (I replaced the firmware with OpenWRT) as my main router and successfully configured DHCP including static leases. Almost everything works fine, all IPv6 ...
0
votes
1answer
516 views

How do I configure the search domain correctly (14.10)?

I recently installed Ubuntu GNOME on my work computer, replacing Windows 7, because I will be doing a lot of Linux development work. Many of our configuration and development scripts use shortened ...
0
votes
0answers
56 views

eth0/wlan0 bridged, no connection without loopback

Ok bear with me because I'm fairly new to this ;) I just installed ubuntu 14.04 and my network interfaces seem to be bridged....wlan0 is being assigned the mac of eth0, also I have normal ...
-1
votes
1answer
51 views

I Think I Just Messed Up My Whole System, HELP!

so i was trying to fix some dependency problems with my repositories and stuff and i ran sudo apt-get -o Debug::pkgProblemResolver=yes dist-upgrade and this is what happened (some log from the ...
0
votes
0answers
36 views

How can I connect bond connection?

I have created a bond connection config. See picture. But how can I connect it?
0
votes
1answer
563 views

Configure VPN… is greyed out and I cannot edit my VPN settings

Today I see that my "Configure VPN..." part is greyed out and I have been using several PPTP VPN connections so far and today suddenly this seems to be inactive. I did the changes in the network ...
0
votes
0answers
61 views

Networking, Bonding two 10Gs with one 1G on 14.04

I have a problem with bonding two 10G NICs. After I configure the /etc/networking/interface file with the below addresses and setting, once rebooted, neither the 1G or bonded 10Gs are pingable unless ...
0
votes
2answers
777 views

vpn l2tp connection on ubuntu 14.10

I am using Ubuntu 14.10 and I need to create a VPN L2TP connection. I installed strongswan, as suggested by this answer, but now I don't understand how to configure the connection. The connection ...
0
votes
0answers
21 views

Can I reuse system-connections on new installation?

I've just made a new Ubuntu install, and kept the /etc/NetworkManager/system-connections folder around. Then I copied all my connections to the new install, but it won't connect. (I guess because the ...
2
votes
3answers
56 views

NetworkManager connects to random network

I upgraded Xubuntu to 14.04 a few months ago and ignored that problem for a while, but it's getting ridiculous. My NetworkManager connects to some random (configured) network, instead of the last ...
0
votes
0answers
75 views

Can not connect to router with WPA2 Enterprise

I am using Ubuntu 14.04 and I am not able to connect to my WiFi which is encrypted with WPA2 and requires username and password and proxy My laptop configuration: Lenovo ideapad Z-570 OS(x64)- ...
0
votes
1answer
53 views

How to connect to two VPNs at the same time?

At my university, I have to connect to the local VPN in order to be able to connect to the Internet, at the same time, I want to connect to another VPN. What should I do?
0
votes
2answers
88 views

network manager - run script when connect failed [duplicate]

is it possible to tell network manager to run a script when network connection gets down (and it can't reconnect)? e,g: I have A bug in my network card driver, and sometimes NM fails to connect, a ...
1
vote
0answers
148 views

PPTP VPN connection always fails

I'm using Ubuntu 14.04. And I'm trying to use the VPN service of bestfreevpn.com using PPTP protocol. Previously I've tried some other free VPN services and I can't seem to connect to any of them. I ...
0
votes
0answers
58 views

Networking not working anymore with wifi

On a Xubuntu 14.04 system, network connections have recently stopped working. What happens is that the computer connects fine to 2 local wireless networks (within the same router), however when using ...
0
votes
2answers
73 views

dhcp server setting

I have a ubuntu desktop (running on a raspberry pi) that is configured with dhcp on eth0. This device comes from an environment where they use a server to route all the internet trafic and dhcp ...
0
votes
0answers
14 views

How to configure proxy authentication in ubuntu to work with terminal when my password contains @ [duplicate]

My USERNAME is 500037280 and my password contains an @ sign. I'm not able to change that at any cost. Is there any way to configure my proxy authentication from a terminal?
1
vote
0answers
340 views

Failed to connect to Cisco anyconnect VPN via openconnect

I've read several texts about this on the web and this site but couldn't solve the issue.I have network-manager-openconnect and network-manager-vpnc plugins installed on Ubuntu 14.04 (for GUI usage). ...
1
vote
1answer
281 views

Unable to load VPN connection editor in Ubuntu 14.04 LTS

Some time ago I created a VPN connection using Ubuntus own Network Manager, which worked fine! Now, a few months later, I want to go in and edit the connections details, but instead I get this error: ...
0
votes
0answers
28 views

Power went out, Network Manager service went haywire. Reboot wouldn't bring it back up, but restarting service did. Why would this happen?

This is kind of strange. My power went out randomly yesterday for a split second. My server came back up and it would not connect to the network. I couldn't ping out from the server, it wasn't ...
-1
votes
2answers
122 views

Ubuntu WiFi fails to connect

###Read Edits below### initial post I'm using 14.10 ubuntu and it is dual booted with windows 8.1, my issue occured "randomly" (being careful using that word - i dont remember if i did anything ...
0
votes
1answer
37 views

network-manager won't show same SSID hotspots!

I'm currently using WICD and it shows 4 different hotspots and their details (channel, etc). These 4 hotspots have the very same SSID. I can connect to whichever I want. So far so good. The thing is, ...
0
votes
0answers
43 views

Skype and network indicators missing from

Recently I lost network and Skype indicators from top panel. I still have language, and battery indicators and clock, but these two are gone. When I tried to run nm-applet i got this message using ...
0
votes
0answers
89 views

Ubuntu 14.04.1 LTS has problems connecting to wifi network

It(could not connect to the wifi network) started occuring recently (maybe after some update) that system has problem with wifi connection. I have no idea what solves this but sometimes I have to ...
1
vote
2answers
304 views

How to create wifi hotspot on Ubuntu 14.04 that is visible to every device?

I was creating a wifi hotspot using kde-nm-connection-editor as instructed on Share Internet Connection With Android in Ubuntu 14.04 but an unexpected error occurred as a result of which I was able to ...
2
votes
0answers
23 views

Define specific internet routing with Network Manager [duplicate]

I have a wireless internet that goes out to the Internet, but I have Ethernet set up for a private internal non-Internet-facing network. When I connect my Ethernet on this private static ...
1
vote
0answers
35 views

Problems regarding the network manager with Wi-Fi networks

I am running Ubuntu 14.04.1 LTS 64-bit and our school uses a network with WPA2 Enterprise security and PEAP authentication without a certificate. The inner authentication method used is MSCHAPv2. In ...
1
vote
1answer
40 views

How to run an access point and a client on a single WLAN card? [closed]

I am setting up a small home server (Xubuntu 14.10 desktop version). I have a ath9k based wireless card for internet access. Unfortunately I can not have wired network from my DSL router to the ...
0
votes
2answers
117 views

Wireless connection won't auto connect when VPN is set to auto connect

I have a wireless connection that connects automatically on its own just fine. In network settings it is set to: "Automatically connect when it is available" & "All users may connect to this ...
0
votes
0answers
27 views

Trunk on KDE Connection manager (802dot1q _ graphical )

I have KDE connection manager v0.9.3.3 . I need to connect my ubuntu 1404 with kde desktop to trunk and create vlan on it . I could see vlan on graphic setting bud can not define trunk. How can I ...
1
vote
0answers
176 views

vpnc works but network-manager-vpnc fails

I am trying to connect to a vpnc vpn. I first created a conf file /etc/vpnc/clientvpn.conf looking like that: ## generated by pcf2vpnc IPSec ID mygroupid IPSec gateway some.ip.add.ress IPSec secret ...
0
votes
0answers
22 views

How do I add DNS entries to Network Manager's dnsmasq instance? [duplicate]

I want to add server=/myvpn.org/1.2.3.4 to some file so that my computer searches the vpn domain correctly. I've tried RTFM - but I just can't find the "root" document on "here's how to configure ...
0
votes
0answers
35 views

eth0: no link - works after windows

I have onboard Atheros ethernet card that is supported via atl1c driver. While I do have a green leds on the card and on the switch the Ethtool claims that there is not link which is confirmed in ...
0
votes
0answers
37 views

DHCP not keeping IP at reboot

I have a computer with Ubuntu 14.04 LTS and Windows 8. Last week we had network problems in the place I work and the machine was moved to another sub-network and then brought back to the initial one. ...
0
votes
3answers
196 views

Stuck at getting IP configuration

Recently, whenever I try to connect to Ethernet, Ubuntu detects the LAN wire but takes a long time(about 10min) to get the IP address. Output of nm-tool: Type: Wired Driver: r8169 State: connecting ...
0
votes
0answers
171 views

Wired or wireless internet connection failure - Ubuntu 14.04

I have a D-Link router and modem connected to my PC running Ubuntu 14.04. I am unable to get both wired and wireless connection out of this setup. All was fine till day before yesterday, when all of a ...
0
votes
0answers
196 views

Xubuntu 14.04 Won't prompt for password when connecting to a wireless network?

I recently updated my Thinkpad X61s from Xubuntu 12.10 to 14.04. I've always used XFCE. Before I was always able to click on any network from the wifi icon on the task bar, if the network required a ...
0
votes
0answers
41 views

Ubuntu network manager VPN ignoring netmask

I configured my VPN using the Ubuntu network manager, which works fine if I let it override my default route. However, I'd like to only route certain traffic over the VPN. So made the following ...
2
votes
0answers
150 views

Ethernet Lights Not On When Cable Connected And Not Working

I have two OS and second OS connects to internet easily, so it's not a hardware problem. The output of lspci is: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM ...
0
votes
1answer
86 views

Can't execute nmcli in an upstart job

The file below is the default network-manager.conf upstart job. $ cat /etc/init/network-manager.conf # network-manager - network connection manager # # The Network Manager daemon manages the system's ...
0
votes
1answer
181 views

Connect to two networks simultaneously

I want to connect to two networks simultaneously using the Ethernet and in-built WiFi or to two WiFi networks by installing an additional WiFi adapter. My requirement: I have two sets of devices ...
0
votes
1answer
232 views

OpenVPN -> SSL Bypass VPN on specific PORT

I am looking to have a VPN enabled on ALL ports except incoming port 80 for my Apache server. My computer is connected to openvpn on Ubuntu to a router that is not connected to a vpn. It is a per ...
2
votes
1answer
279 views

OpenConnect: Force all connections throught VPN (if IPv6 unavailable)

On Ubuntu 14.10, I'm connecting to the same VPN service using either OpenConnect (through the network-manager-openconnect(-gnome) packages or the Cisco AnyConnect Client. Using the AnyConnect client, ...
0
votes
2answers
137 views

network manager not working

I'm using Ubuntu 14.04.1 server. Recently, I installed Ubuntu desktop for it; before that it had automatically gained an IP address through DHCP. After installing Ubuntu desktop, I have provided an IP ...
0
votes
1answer
536 views

Get Qualcomm Atheros AR93xx Wireless Network Adapter to work under Ubuntu 14.04

I'm trying to install TP-Link TL-WDN4800 Adapter with Ath9k under trusty. It should work just out of the box for windows and linux. On windows it works, but on ubuntu 14.04 (same computer) it doesn't. ...