0
votes
0answers
23 views

bootstrap juju on maas

I have this little MAAS with only one node ready to deploy (ubuntu 12.04 Precise pangolin)... I was trying to set up the Juju enviroment but i continously get this error $ juju bootstrap Bootstrap ...
0
votes
1answer
22 views

MAAS / nodes have limited internet access after install

I´ve installed a test environment for MAAS and JUJU. MAAS manages both DHCP and DNS. Following setup: maas01 - static IP juju01 - dhcp and dns from maas01 node01 - dhcp and dns from maas01 and pxe ...
0
votes
0answers
12 views

conversion from commencing to ready state in maas

i have added two nodes in MAAS but they are in commencing state and i want that state to be ready. i want to install juju on my machine plz help to get rid of it. and give me the procedure for ...
3
votes
1answer
80 views

juju bootstrap in maas fails to retrieve juju tools

I installed MAAS, added the Nodes and created the juju but while i tried the following code juju bootstrap I am getting this error. WARNING no tools available, attempting to retrieve from ...
0
votes
0answers
34 views

Bootstrapping Juju gives “”ERROR could not access file '*-provider-state' gomaasapi: got error back from server: 403 forbidden."

We are trying to bootstrap Juju onto another machine in the MAAS cloud but are getting a "ERROR could not access file '*-provider-state' gomaasapi: got error back from server: 403 forbidden." error. ...
3
votes
1answer
86 views

Should I use MAAS and Juju if I only intent to use a single PC?

I am planing to setup a local server at my home that I will use for various entertainment/work tasks. Do you think that installing MAAS and juju is an overkill if I intent to use only one pc?
1
vote
0answers
19 views

What is the minimum number of nodes required for MAAS? [duplicate]

We have an Ubuntu VM with a MAAS controller and only 1 node. We are not able to install juju. Is there a minimum node requirement for MAAS?
1
vote
2answers
77 views

juju http-proxy and no_proxy settings

I'm setting up an environment with juju and maas. The maas environment has no direct internet connection, a proxy must be used. I have configured the juju environment's proxy using juju set-env ...
3
votes
1answer
90 views

“gomaasapi: got error back from server: 403 FORBIDDEN” error while bootstrapping

I am investigating MAAS with Juju on Ubuntu 12.04.4 LTS. (also tried 13.10...) I have set up my server(s) using various tutorials, but I keep getting 403 errors when bootstrapping Juju. I have tried ...
3
votes
1answer
46 views

Destroying service before removing the relation causes both services to hang at dying

I deployed wordpress and mysql and add relation between wordpress and mysql. I try to destroy wordpress before removing the relation between wordpress and mysql. Now, both services are hanging at ...
6
votes
1answer
97 views

How do I use MAAS and Juju with an existing DHCP server?

I found some information about installing ubuntu with MaaS and JuJu, and I would like to try it out however I am not finding any information on how to take in to account a DHCP server already in the ...
2
votes
1answer
58 views

Hybrid Cloud Automation using Ubuntu JUJU

I am administrator who helps to deploy cloud services to an organisation. Is it possible to use Juju to deploy services based on user requests. Kindly answer my following doubts. Users use a web ...
1
vote
1answer
68 views

I installed MAAS server, would like to add one node with a different ubuntu release, how should I do it?

I looked around, it seems lots of information, is there a step by step instruction somewhere? I tried to add a VM-node manually,it is in commissioning state, what should I prepare before starting ...
1
vote
1answer
74 views

MAAS add virtual node - 'namedtuple_as_object' error

I have a KVM-based virtual machine up and running on a server that's also running MAAS. I'm following the instructions here: http://maas.ubuntu.com/docs/nodes.html#virtual-machine-nodes to add the VM ...
1
vote
1answer
101 views

MAAS, JUJU help: MAAS Nodes have no access to the internet while PXE booting

We are trying to implement a cloud setup in our college using MAAS/Juju/OpenStack. The college has its own DHCP server and we don't have access to that. So, we can't set next-server to our MAAS ...
5
votes
1answer
102 views

How do I deploy havana instead of grizzly?

i'm trying to install openstack havana dashboard but the dashboard is always grizzly... I use juju and maas to deploy the charms on a bootstrap node, set the openstack-origin to : cloud:precise-havana ...
0
votes
1answer
174 views

MAAS Internal Server Error after update

I'm trying to deploy OpenStack Havana over Ubuntu Precise using juju. This is what I do exactly: Install Ubuntu server with maas following the official guide. sudo maas createsuperuser sudo apt-get ...
1
vote
0answers
103 views

2 added nodes to MAAS server but their state does not change from “Commissioning” to “Ready”!

I have added two nodes to a MAAS server (which is deployed on a separate 3rd node) but the nodes never change their state from "Commissioning" to "Ready"... Some additionally details, please let me ...
4
votes
1answer
259 views

How do I resolve a 401 error when setting up Juju MAAS environment?

Here is the debug output: 2014-01-14 17:09:57 DEBUG juju.environs.configstore disk.go:77 Making /home/neo/.juju/environments 2014-01-14 17:09:57 INFO juju.environs open.go:156 environment info ...
3
votes
1answer
67 views

How can I change the version (default-series) that Juju deploys?

I have installed MAAS server on one machine and have two other nodes. In the web interface of the MAAS server I have set distro to 13.10 and commissioning to 13.10. When I use juju bootstrap it ...
1
vote
1answer
226 views

Openstack instanses can't accept floating IP

Hello when i create an instance in openstack dashboard and try to allocate an ip address i see : Error: 404-{u'NeutronError': {u'message': u'External network a522b82c-7640-4108-8bdb-72e6218aace7 ...
0
votes
1answer
84 views

Openstack havana shows only one computer

I have 3 computers with wich i want to build a cloud. On the first i have installed MAAS, after that i have added the other two as nodes in the MAAS. I have installed juju bootstrap on the second ...
8
votes
0answers
187 views

Howto configure MAAS to separate PXE traffic and IPMI traffic on different subnets?

I am trying to set up a part of our network as a linux cluster. Since its a little educational for me, I choose using MAAS with JuJu. However there are some questions that boggle my mind and I was ...
0
votes
0answers
34 views

Openstack to one machine [duplicate]

I want to use juju to deploy openstack. I want to install - mysql,rabbitmq,quantum,glance,cinder,opnestack-dashboard,keystone and etc. on two nodes /the one is bootstrapped/. I install the ...
0
votes
1answer
280 views

How to deploy Havana with juju

I've been all over the web searching for an installation guide for openstack Havana via juju charms over Ubuntu saucy 13.10 which is said to be build specially for Havana; with no luck at all. All I ...
0
votes
1answer
53 views

juju status is - Conflict 409. What should I do?

I have 3 computers. On the first I have installed MAAS with DHCP and DNS, the other two are ready in the web interface. After I use juju bootstrap one of them is turning blue and the other is still ...
1
vote
1answer
69 views

Juju gui problem with login

Hello i have installed maas and juju, now that i want to login juju's gui there is user and password user-admin password i have tried the password from my environments.yaml but no success. I use ...
0
votes
1answer
30 views

juju consolidation and constrains

I'm trying out Ubuntu cloud infrastructure in a lab environment, I had couple attempts and fails mostly because my references are outdated. "My main ref. now is ...
0
votes
1answer
213 views

Cannot browse Horizon “openstack-dashboard”

I install maas > juju > OpenStack with co-located services. The "openstack-dashboard" charm is installed on the same node with "keystone". All the units are up with no errors, and this is the output ...
0
votes
1answer
383 views

“WARNING no tools available, attempting to retrieve from amazonaws” while bootstraping

I have installed MAAS server with DHCP and DNS. Next I added two nodes, they turned green. However, when I use Juju bootstrap there is an error: WARNING no tools available, attempting to retrieve ...
1
vote
1answer
42 views

I want to configure maximum number of machines in MaaS

I clustered 3 machines with MaaS environment and those machines are definitely have different amount of resources. (A) 64core with 256GB memory (B) 48core with 192GB memory (C) 4core with 8GB memory ...
1
vote
1answer
105 views

maas nodes login incorrect

I'm testing Ubuntu12.04 MAAS with juju ,i installed the maas server and add 2 nodes now the nodes allocated to admin user when i start them login is required i tried the admin username and password ...
1
vote
2answers
351 views

How do I resolve a “maas”: no public ssh keys found. error?

I am encountering an error when installing Juju: juju bootstrap ERROR error parsing environment "maas": no public ssh keys found. I have installed RSA key which is found in my root folder after I ...
1
vote
1answer
34 views

MAAS server can't find juju server

I installed MAAS(Computer 1) and Juju(Computer 2) with router. I checked that both of installation is complete. But, It didn't work any juju operation(status, deploy, etc..). Maybe, MAAS server ...
0
votes
2answers
36 views

Multiple Juju environments on the same cluster

I recently deployed a MAAS/Juju environment based on a six nodes cluster, using Ubuntu 12.04 LTS, to run a "proof of concept". I could appreciate how interesting the architecture is, and I'd like to ...
2
votes
1answer
157 views

MAAS in High Availability

I recently deployed a MAAS/Juju environment based on a six nodes cluster, using Ubuntu 12.04 LTS, to run a "proof of concept". I could appreciate how interesting the architecture is, and I'd like to ...
0
votes
1answer
610 views

OpenStack Havana with Juju/MAAS : no Quantum API server listening for requests

I am using Juju with MAAS on a 12.04 in order to deploy OpenStack Havana. In order to do this I have successfully deployed the recommended charms with the openstack-origin set to ...
1
vote
2answers
281 views

Juju status machines 1 2 3 instance-id: pending forever

I am building a MAAS environment with 4 physical machines. 1 is running MAAS and Ubuntu 13.04 3 are MAAS nodes running Ubuntu 12.10 (machine 0,1,2) My problem is that after juju bootstrap only ...
2
votes
2answers
56 views

Can Juju connect services that are in different environments?

Background: I'm trying to get Openstack working with Juju. I'm testing it, so I either have to use KVM virtualization or LXC because I only have one (powerful) machine. I would prefer to use LXC ...
1
vote
1answer
110 views

Is it possible to use Juju on MAAS nodes not connected to Internet?

At present I'm testing Ubuntu Juju with MAAS nodes, on a 12.04 server. For this I'm using Virtual Boxes. Actually, I am wondering if it possible to deploy Juju charms on MAAS nodes which does not ...
4
votes
1answer
413 views

What are the steps to deploy OpenStack in a VM using juju?

I'm looking for a guide to deploy OpenStack (all in one) in a small VM (2 cores, 2GB ram) for development purposes, as well as for learning the juju process. What environment should I choose? ...
0
votes
0answers
42 views

How to make my nodes online in maas? [duplicate]

My nodes are still commissioning.After i boot from network, password is needed to log in which i don't know.I try many ways to solve this.Any idea?
7
votes
2answers
151 views

Juju unable to remove relation

I am trying to remove and re add the relation between openstack-dashboard and the identity service. I have 2 units of the dashboard service and I have made an HA cluster out of it, and also I have 2 ...
0
votes
1answer
735 views

Why is Juju unable to connect to environment?

I can bootstrap but I can't see the juju status. Error details: no instances found This shows up when i juju --debug --show-log and I bootstrap MAAS but it shows environment is already ...
0
votes
1answer
97 views

not able to upgrade maas to 1.4?

I am running ubuntu 13.04 LTS, and maas version runnung is maas 1.3+bzr1470+dfsg-0+1474+175~ppa0~ubuntu13.04.1, so i'm trying to upgrade it to mass 1.4 but its failing, sam@xsmaas01:~$ sudo apt-get ...
1
vote
2answers
178 views

` ERROR could not access file 'provider-state'` when bootstrapping

I tried to bootstrap juju but this error shown below keep coming up. ERROR could not access file 'provider-state': Get http://X.X.X.138/MAAS/api/1.0/files/provider-state/: dial tcp X.X.X.138:80: no ...
3
votes
3answers
1k views

JUJU and ERROR environment has no access-key or secret-key

following the official guide: [1]https://juju.ubuntu.com/docs/config-maas.html and considered that I've generated the ssh key (added it to UI of MAAS) and the API key, my environments.yaml file ...
3
votes
2answers
374 views

Juju remove units stuck in dying state so I can start over?

I have machines running on MaaS using Juju. Some of them failed to deploy because a hook didn't run because of an (invalid) setting I set in the config. In the Jju UI, I tried marking them as ...
1
vote
1answer
600 views

Reset MAAS after loosing Juju configuration?

I managed to delete my Juju client cofiguration without running a juju destroy-environment first, leaving my MaaS in a state where I could not deploy to it. I would get the following (conflicting) ...
2
votes
1answer
305 views

Juju deploy of Charm (Mysql) in MAAS provider failing after successful bootstrap. Juju status stuck in “Pending” state

I have setup a MAAS environment and using Juju to deploy services. I followed the simple juju tutorial of trying to deploy Mysql and Wordpress. The bootstrap node has come up fine without any errors. ...