Questions tagged [kvm-switch]
Keyboard, Video, Mouse switch
39
questions
0
votes
0
answers
45
views
Using Bi-Directional USB-C Switch to switch between Ubuntu and Windows connected to dock -- layout issues with ubuntu
I am a rather new ubuntu user, but I use a bidirectional USB-C switch to link both my work computer (Windows) and my personal computer (running latest version of Ubuntu) connected to a docking station ...
0
votes
0
answers
164
views
Keep display active while KVM switched to other PC
I appreciate that this maybe quite specific but I wondered if there was any way to keep the display output going (as if I was still using Ubuntu) when I switch KVM to another device? I only have a ...
0
votes
1
answer
206
views
Monitor goes back to landscape mode after KVM switching to Xubuntu from Windows 11
my setup is a
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers (rev 05)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 630 (...
1
vote
0
answers
330
views
22.04.2 LTS very slow to respond to KVM switching
The problem
Switching my KVM from my desktop to my laptop is usually a 30-60 second ordeal when it should take maybe a few seconds at worst.
The displays usually light up right away, complete with a ...
4
votes
1
answer
1k
views
Ubuntu Thunderbolt docking station Monitors not working
I am trying to get my Ubuntu laptop to work with my new docking station, with passthrough of everything via just thunderbolt.
Docking Station: i-tec USB-C/Thunderbolt KVM Docking station Dual Display ...
1
vote
1
answer
1k
views
Ubuntu 22.04 won't recognize keyboard/mouse via KVM switch
I have been having a strange issue since upgrading to Ubuntu 22.04 LTS and am struggling to troubleshoot it. My desktop keyboard and mouse are routed through a Blackbird USB 2.0 KVM switch. Plugged ...
1
vote
0
answers
151
views
Mouse no longer working when using a Linksys KVM switch with Ubuntu 20.04
I have been using a Linksys PS2KVM2 (2 port) switch to toggle between Ubuntu and Windows for years. I recently had a need to add another computer, so I replaced the Linksys 2 port KVM with a Linksys ...
1
vote
1
answer
416
views
Ubuntu 20.4 suspends when switching with KVM-switch
Recently, my HP ProBook 640 was upgraded to Ubuntu 20.04 coming from 18.04..
I use a hardware DisplayPort/USB KVM Switch (KVM meaning here: keyboard, video, mouse) to switch between computers, as the ...
0
votes
1
answer
1k
views
New install of Ubuntu 20.04, Mouse through KM switch not fully working
I am a moderate Steam gamer and I finally made the disciplined choice to switch to Ubuntu, for the third time in my life. I am very paranoid about security and I am dreaming of buying a Libreboot ...
0
votes
0
answers
254
views
Switching on 2-port KVM resets mouse sensitivity (Ubuntu 20.04, 20.10)
I have a 2 port HDMI KVM switch. Recently, on Ubuntu 20.04 and on Ubuntu 20.10 (tried an upgrade to fix it), when I switch back to the Ubuntu machine, the mouse sensitivity resets. This only started ...
0
votes
2
answers
621
views
KVM switch not showing image on secondary screen
Trying to set up my XPS 9570 on Ubuntu 20.04 with this KVM switch:
https://www.amazon.ca/gp/product/B08F1XGTBN/ref=ppx_yo_dt_b_asin_title_o00_s01?ie=UTF8&psc=1
I can use the keyboard and mouse ...
2
votes
0
answers
5k
views
Can I switch a bluetooth keyboard/mouse via a USB KVM switch?
I have two Ubuntu machines in a closet, and a USB cable coming out from there via a Video/USB switcher. My keyboard, mouse, a tablet screen, and USB audio are all hanging off the far side of the Video/...
3
votes
0
answers
1k
views
Ubuntu 20.04 desktop DVI issue through KVM (keyboard video mouse)
I’m trying to share the same monitor between a desktop and a laptop. I got a KVM. Switching the shared monitor from the desktop to the laptop works fine; switching the other way, from the laptop to ...
14
votes
9
answers
37k
views
Setting up barrier to run on startup
Barrier is a free popular KVM software that enables mouse/keyboard sharing across several devices.
I've been fiddling with it for a few hours and I can't seem to get it right.
I have a barrier ...
1
vote
0
answers
593
views
2-port KVM switch mouse lag
I hope I am posting this to the correct area...
I just purchased a StarTech SV211DPUA 2-port display port KVM switch. I'm using Ubuntu 18.04. I'm having an issue with the KVM where the mouse lags ...
5
votes
2
answers
6k
views
How to use a key press to wake a suspended laptop when using a KVM switch?
I'm using a wireless Logitech Keyboard with a Logitech Unifying Receiver plugged into a KVM switch. I created a systemd suspend shortcut to suspend the laptop, a Lenovo IdeaPad. The laptop's lid is ...
2
votes
0
answers
888
views
UBUNTU 17.10: Issue with kvm switch
I had Ubuntu 17.04 running on a spare desktop, DELL 7010 (12G RAM) x64.
Had been working fine, so when prompted to upgrade given other Ubuntu upgrades have gone fine - I OKed it.
Since the upgrade ...
0
votes
1
answer
4k
views
How to: Share Mouse and Keyboard with 2 Computers?
How can I create a virtual KVM Switch over the local network between two computers?
Goal: Use a 4K monitor between 2 computers.
The traditional solution is a 4K KVM Switch. But they ain't cheap.
So ...
0
votes
1
answer
301
views
keyboard layout returning to default when using kvm
one of the settings which I apply from a settings bash script whenever I run Ubuntu 14.04 from a live-USB, is to set the keyboard layout to British:
setxkbmap -layout gb
It works fine until I use my ...
1
vote
1
answer
2k
views
Aten CS22U hotkey scroll lock not switching desktops
I brought this new Aten CS22U KVM switch, but when I press scroll lock twice on my keyboard, it does not switch desktops :(, does my new KVM switch not have the hotkey feature ? The Aten switch in my ...
1
vote
2
answers
874
views
Keyboard, Video, Mouse Switch Problems
I've installed Mythbuntu 16.04 64 Bit Primary Backend on a Dell Optiplex 745 Desktop and I'm in the process of setting up another Backend on another Dell Optiplex 745 SFF desktop. I've installed a KVM ...
8
votes
1
answer
1k
views
What do I need to configure if an input device is attached through a KVM switch?
I've got a KVM switch from my employer (Aten CS782DP) which works fine as far as I can tell. However, it seems to be causing a problem with my input device (Thinkpad USB Compact Keyboard with ...
1
vote
1
answer
1k
views
Kvm Switch not signal monitor
I've got this KVM switch, to connect two computers with one mouse, keyboard and monitor. I am using Xubuntu and the problem I have apart from the normal resolution problems that everyone is having (...
1
vote
1
answer
241
views
Xfce notification for detected keyboard and/or mouse
I have a 4-port KM switch (4 screens, 4 computers, 1 keyboard and mouse switched across all of them).
I was wondering if there was some sort of notification tool to display a popup in Xfce (Xubuntu) ...
0
votes
1
answer
340
views
Logitech S100 USB speakers output no sound on Ubuntu 15.04, USB 1.1
I am a first time user of Ubuntu. I recently installed it as a dualboot with Windows 7. I have Logitech S100 USB speakers which work fine in Windows. However, I can't get any audio to play in Ubuntu.
...
2
votes
0
answers
2k
views
KVM Switch Under Ubuntu 14.04
I'm trying to install a KVM Switch between two computer. The first one runs under Windows XP. The mouse/keyboard/screen works perfectly (the first computer is an ACER Aspire (Lifestyle Line)). When I ...
1
vote
2
answers
243
views
Switch between Keyboards
I have two text entry resources: English & Persian. I had defined Alt+L Shft to switch between them. Then I installed "Unity Tweak Tool" and "CompizConfig Settings Manager". After the very first ...
0
votes
1
answer
551
views
How can I get the Tripp-Lite KVM Switch work on Ubuntu?
I have a Tripp-Lite KVM Switch model B020-008 and I'm trying to get it to work on Ubuntu version 10.04 LTS and 12.04 LTS but for some reason it only barely works on 10.04 LTS meaning the mouse barely ...
1
vote
1
answer
476
views
Change screen resolution detection timeout
I'm using a KVM switch for using two laptops.
One is connected to Ubuntu 12.10.
The problem I have, is that every time I switch to the other PC, Ubuntu changes the resolution back to the integral ...
8
votes
1
answer
7k
views
Fn keys not working in Microsoft ergonomic keyboard behind KVM switch
I have recently acquired an Encore USB KVM switch to handle both my desktop and laptop computers. Both computers are dual boots (Ubuntu 12.04/Windows 7 and Ubuntu 12.10/Windows 8). I have connected to ...
1
vote
3
answers
7k
views
Double-tap on ScrollLock key fails to change KVM target machine
Using a Belkin KVM switch. Normally, I'd be able to double-tap scroll-lock and choose a number corresponding to the machine I wish to switch to, however, since I upgraded from 12.10 to 13.04 Beta 2, ...
2
votes
6
answers
21k
views
KVM switch and screen resolution problem
I use 12.04. Till today I use it with an Acer trravelmate4070 and an LG screen in order to expand my desktop. Works great.
Till today that I decided to connect my LG screen to a KVM switch in order ...
13
votes
5
answers
49k
views
Can I force VGA signal output even when xrandr shows 'disconnected'?
My notebook is connected to a HDTV through a KVM Switch (one other notebook also connected to the same HDTV). The problem seems to be that Ubuntu doesn't recognize the HDTV to be turned on and ...
5
votes
3
answers
13k
views
How to load EDID Firmware with drm_kms_helper
I've some screen trouble with my computer, I use it with a KVM switch, but this switch seems to block the EDID detection of the screen, and as no screen is detected, after the boot (when the Ubuntu ...
6
votes
2
answers
3k
views
KVM switch not detecting keyboard [closed]
I've just plugged in a Belkin Flip KVM to handle switching between my desktop and my Eee PC 1000. The mouse and monitor switch fine, but the separate keyboard does not work when the KVM switches to ...
1
vote
3
answers
4k
views
Using numlock for Trendnet KVM switch no longer works
I have a Trendnet TK-209 KVM switch, and since upgrading to 11.10, I can no longer switch between systems using numlock-numlock from ubuntu. (I also tried scrlk-scrlk). If I switch manually to my ...
0
votes
1
answer
1k
views
Keep numlock status while using KVM
I recently purchased and started using a KVM. Most things work as I expect them, but when I switch back to my main [ubuntu 10.04] desktop, numlock gets turned off.
I suspect that it looks to the ...
4
votes
1
answer
6k
views
How can I get my IOGear GCS632U KVM switch to work? [closed]
I bought a KVM switch and I'm trying to use it to have it connected to my main PC (win7) and my new machine I just installed ubuntu on. I hooked it up properly, and tried using it. It worked when ...
2
votes
1
answer
985
views
How do I change my monitor's resolution when using a KVM?
I'm using 10.04 behind a KVM switch. The KVM is old and doesn't pass DDC through, so when the box boots up it just assumes I can't handle anything beyond 800x600. Apparently the xorg.conf is ignored, ...