0
votes
0answers
60 views

12.04.03 installation error

When trying to install 12.04 from USB, erasing a corrupt version of 10.04 (I had run chmod 777 -R / on it with root access), I get the following error: kernel panic - not syncing : attempted to kill ...
1
vote
0answers
85 views

kernel panic after removing files from full boot folder

On my Acer Aspire 7720Z laptop, running Ubuntu Lucid Lynx I got the message that the boot folder was full. Looking around posts, I figured out it contained more files than I needed. So I deleted ...
0
votes
1answer
268 views

“No installable Kernel was found in the defined APT sources”

I'm trying to install an old ubuntu-10.04.4-server-amd64.iso on a custom machine, which uses a vortex86 processor. The installation works fine, but it can't install a kernel. "No installable ...
0
votes
2answers
130 views

aptitude ugrade does not change my kernel

Sorry if the title is not very clear. This is rather new to me. I have ran this 10.04.4 LTS server for over a year now. I have dutifully used aptitude update / aptitude upgrade on a regular basis ...
2
votes
1answer
153 views

Was TRIM support backported into the 2.6.32 kernel that is in 10.04?

I have found conflicting answers to this around the web, even a link to a launchpad bug: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/571476 which is kind of left hanging. So I'm curious, was ...
1
vote
0answers
430 views

No ethernet or wireless interfaces on 10.04

So, I just got a new Lenovo ThinkPad T430s and installed Lucid 10.04 on it. The installation went fine but when I logged in there was no connection to the internet even with a cord plugged in. ...
1
vote
1answer
443 views

Which table of pci codes shall I use?

I have downloaded from http://pciids.sourceforge.net/v2.2/pci.ids the last pci.id file and I updated my /usr/share/misc/pci.ids file with it. OLD PCI.IDS FILE, March 2010: lspci -nn outputs: 00:00.0 ...
3
votes
2answers
1k views

How do I install 10.04 on a Vortex86DX embdedded system?

I am trying to install Ubuntu on a Netcom NC-499 board that contains a Vortex86DX processor. The processor vendor claims support for Ubuntu 10.04 but I am having problems installing it. I am trying to ...
1
vote
4answers
6k views

How do I correctly upgrade the kernel on Ubuntu 10.04 LTS?

I'm trying to upgrade the linux kernel from 2.6.32-34 to the latest update of that series, which appears to be 2.6.32-34. I ran: sudo apt-get update sudo apt-get upgrade At this point i was ...
1
vote
3answers
4k views

after upgrade from 10.04 to 12.04 cannot boot with linux 3.2.0-24-generic-pae

After upgrade from 10.04 to 12.04, I cannot boot with linux 3.2.0-24-generic-pae: process gets frozen in a xubuntu initialization screen (I had qimo installed). If I try the recovery mode (with the ...
2
votes
1answer
2k views

Sound doesnt work in newest kernel, but works in 2.6.33 kernel?

When I install the 10.04 LTS Lucid Lynx kernel on my Ubuntu 12.04 LTS system, sound works fine. But if I use newest kernel of 12.04, it shows my audio hardware but plays no sound. I don't want use ...
0
votes
1answer
1k views

Installing a new kernel on 10.04 because old kernel can't install my wireless card [duplicate]

Possible Duplicate: Can I update the kernel of my 10.04 LTS to the latest kernel? Is it possible to install a new kernel to Ubuntu 10.04 using a debian package or something ? I have a new ...
1
vote
2answers
8k views

Cannot boot from USB disk with “not a COM32R image” error

After installing 11.10 on my Dell Studo 15 (Model 1557) laptop, it started to overheat. Recently it even shutdown twice saying that critical temperature has reached even when I was just idling (not ...
5
votes
0answers
336 views

It is possible to easily upgrade the kernel in 10.04.3 to version 3.0.0 and newer? [duplicate]

Possible Duplicate: Can I update the kernel of my 10.04 LTS to the latest kernel? It is possible to easily upgrade the kernel in Ubuntu 10.04.3 to version 3.0.0 and newer?
3
votes
1answer
260 views

I seemed to have deleted my kernel pae headers how do I recover?

I accidentally deleted the live kernel headers with pae while cleaning my old kernel headers. I am using Ubuntu 10.04 Netbook Remix. How can I recover. I booted with my USB loaded with Ubuntu and all ...
3
votes
1answer
438 views

How do I get Perfmon support for my kernel?

I would like to install perfmon for using performance monitoring events on my Ubuntu 10.04 LTS server machine. I have read that Ubuntu kernel 2.6 comes with perfmon support. However, as we can see ...
1
vote
1answer
2k views

How to uninstall old versions of the kernel? [duplicate]

Possible Duplicate: How do I to remove or hide old kernel versions, to clean up the boot menu? How to uninstall old versions of the kernel? The grub menu is full with old kernel entries, ...
1
vote
2answers
2k views

Can I upgrade to Linux 3 Kernel on Ubuntu 10.10?

I need to use Linux 3, becasue with Linux 2.6.x has display problems with my SandyBridge integrated graphic. On the other hand, I need to downgrade to Ubuntu 10.04/10 because Betavine packages for ...
1
vote
1answer
615 views

Is RTLinux the same as linux-rt?

I'm trying to install a hard realtime kernel in Lucid for some robotics work. My preference is RTLinux (http://rtlinuxfree.com) by Wind River Systems. I also see that there is a package by the name ...
0
votes
3answers
578 views

Doesn't detect usb modem after kernel update

i'm a noob to Linux. Just installed Lucid Lynx a couple of days ago (through my flash drive) because i always wanted to use Linux in default. It was a clean install. Now the next stop for me was to ...
2
votes
1answer
950 views

How to stop crashing my system while using PCI-X1 capture cards?

11.04 64-bit Ubuntu. I reinstall third times and just after installation i have this screen: Now trying with BIOS to disable the PCI-X1 card somehow if i can login at-least else i have to use a ...
2
votes
1answer
1k views

Removing old Linux versions on GRUB 2 via Synaptic Package Manager

I have read in other sites and this question about removing old entries using Synaptic Package Manager but when I open it I can't find anything when I type linux-image or numbers. EDIT: Yes Ubuntu ...
0
votes
1answer
76 views

Installed server but track the desktop kernel

Is it possible to have a system originally installed with the Ubuntu 10.04 server edition both use and track updates of the desktop kernel (i.e. linux-image-generic instead of linux-image-server)? I ...
0
votes
1answer
763 views

How do I update Lucid kernel

Recently I have installed Lucid in my PC, I have a low internet connection speed, but I want to update my kernel. So, I go to update manager to update it. But, I'm confused what is the package to ...
18
votes
3answers
14k views

Can I update the kernel of my 10.04 LTS to the latest kernel?

I want to update the kernel version of my current 10.04 LTS to at least 2.6.37 (because the drivers for my eth0 and wlan0 interfaces are included in the said kernel). If it is possible, how do I do ...
6
votes
1answer
3k views

What's the best way to update the linux kernel if I have no internet connection?

I currently did a clean install of Ubuntu LTS 10.04 on my new laptop. After the installation, I attempted to do an update of the system only to find out that the 2 most important interfaces (eth0 and ...
2
votes
0answers
643 views

Latest kernel version crashes on boot. How to investigate? [closed]

I have AMD Athlon XP1600+ with 623 MB of ram. It was running fine with kernel 2.6.32-31-generic until I installed the latest updates. After updating Ubuntu requested to restart the computer. As soon ...
3
votes
2answers
315 views

Old kernel and recent CPU

this is my question, I'd like to install Ubuntu 10.04 LTS on a laptop equipped with Intel Core i7 processor: does Lucid kernel support the features of this cpu? Many thanks.
6
votes
1answer
3k views

How to configure automatic reboot after kernel panic?

Now, it's the first time I encountered a kernel panic on a system that I can only access remotely (i.e. not physical access). The kernel panic I encountered is basically the one described here, only ...
1
vote
2answers
173 views

What happens when I install the package “linux”?

I see a package called "Linux" in Synaptic in 10.04, and I want to know what happens when I install it, without making my system unusable. Does it make a dual-boot option (I have only Ubuntu), or ...
1
vote
1answer
457 views

Latest kernel installed, but not running

I have a server, the current running kernel is 2.6.32-26-server, but I also have the following versions installed (installed through doing aptitude full-upgrade, but not rebooted): ...
1
vote
0answers
313 views

How can I repair a corrupt kernel if no others are installed? [duplicate]

Possible Duplicate: How to restore a system after accidentally removing all kernels? I've been running Ubuntu 10.04 on my laptop for quite some time. When I went to boot it up this morning, ...
3
votes
1answer
349 views

Error encountered compiling kernel 2.6.35-25.44

I downloaded the linux-source-2.6.35 package and tried to compile it using the command "fakeroot make-kpkg --append-to-version=.dbg kernel_image kernel_source kernel_headers --initrd" after "make ...
2
votes
1answer
322 views

What are the changes between kernel in 10.04 and 10.10?

Is there a place where I could check what are the differences between kernel in version 10.04 and 10.10 ? The reason is that from time to time I have total system freezes with 10.10 on Dell Inspiron ...
0
votes
2answers
1k views

Boot error for custom compiled kernel - gave up waiting for root device

I have installed lucid on my Lenevo Laptop (Y 410 series , x86 platform) and it is working fine. Now I have compiled kernel 2.6.37 downloaded from the kernel tree. I followed usual procedure of ...
8
votes
1answer
15k views

How do I permanently load a kernel module?

I have a Compaq Presario CQ-61 320SQ, I am using Ubuntu 10.04 because after update to 10.10 my mouse and touchpad won't work, network won't work, sound won't work ... (I managed to fix most of them ...
4
votes
1answer
3k views

What is the impact of the nolapic parameter on a multiprocessor laptop?

I have an Asus X71SL with an Intel Dual Core T3200 processor. Any kernel version after 2.6.35-rc2 won't boot up on my machine without the nolapic kernel parameter at bootup. I have already reported ...
1
vote
0answers
227 views

Can't connect to internet with noapic option [closed]

yesterday ubuntu 10.04 just hanged and when i restarted it , i just got a black screen with a blinking cursor , googling it i found a solution which is passing noapic flag during boot .. that worked ...
4
votes
3answers
6k views

Where can I find the kernel logs?

Anybody know the best way to write/read/commit/document/upload errors in the kernel log in Ubuntu 10.04? Are there a tool suitable for this type of job in the UBuntu Software repositories?
1
vote
1answer
278 views

Netgear 511 wireless adapter stopped working after upgrade

Why will Netgear wireless adapter not work with SIMPLE netgear511 upgrade to UBUNTU 10.04 WHEN IT WAS WORKING PERFECTLY WITH 9.04 I upgaded from UBUNTU 9.04 on my IBM THINKPAD to 10.04 LTS. The ...
7
votes
1answer
774 views

Minimize boot time

I'm using ubuntu 10.04 (pinguy os). My system takes more than 30 seconds to boot (atom 1.6Ghz). How to choose which modules to load during booting?
2
votes
0answers
1k views

Wifi speed with driver rtl8187 drops [closed]

I am using lucid lynx with this USB adapter and drivers rtl8187. When I start a download, it starts at 1500kpbs (if i use "iwconfig wlan0 rate [more than 11MB]" it starts at a lower speed), it ...
1
vote
2answers
1k views

Kernel panic: unable to mount root fs after building mainline kernel

Similar problem as reported by another user. While booting, the system can't find /dev/sda1 and so a "kernel panic: unable to mount root fs on unknown-block (0,0)" appears on screen. I'm compiled ...
3
votes
4answers
1k views

How to build mainline kernel and make it show up on GRUB?

After successfully compiling and building my mainline Kernel (2.6.32.25) under my Ubuntu 10.04 with these headers I was wondering: how to make this kernel on startup, so I can choose which one to ...
8
votes
2answers
8k views

what kernel version comes with ubuntu 10.04.1?

Could you tell me the version number of the 10.04.1 kernel?
3
votes
4answers
815 views

Can I upgrade to maverick and keep my kernel?

I have been using Ubuntu since 9.04 without many (serious) problems, I installed the 10.10 CD and put it on a flash drive (after a while or looking through the web to realize that the startup disk ...
0
votes
1answer
246 views

Implementing kernel timer in Ubuntu

Could you please give any basic example of a kernel timer (start_ktimer) implementation in Ubuntu?
6
votes
1answer
826 views

How can I quickly recompile the kernel after changing the configuration?

I'm trying to fix a suspend problem on my Dell Inspiron 600m. I think the problem is that the video driver modules aren't being reloaded properly. So, I'm going to try to compile the video drivers ...
6
votes
2answers
2k views

Laptop immediately suspends when going onto battery power

I've got an MSI Wind, model U100 that's been running Ubuntu without trouble for a long while. After upgrading to 10.04 a few months ago, I've had this strange problem. As soon as I unplug the laptop ...
9
votes
4answers
2k views

How do I install kernel 2.6.35 in 10.04?

I have encountered a bug relating to stock kernel 2.6.32 in lucid, so I want to upgrade to 2.6.35. What is the simplest way of doing that?