Juju is a next generation service orchestration framework. It has been likened to APT for the cloud.

learn more… | top users | synonyms (2)

46
votes
1answer
13k views

How do I configure juju for local usage?

I'm too cheap to pay for EC2, and I don't have enough servers to set up my own openstack, how do I configure juju to use Linux Containers (LXC) on something like my laptop?
8
votes
3answers
2k views

How do I deploy an OpenStack cloud with Juju?

I'd like to get a test cloud up and running in preparation for a possible deployment of 12.04. I messed with the UEC a bit, but have had a much harder time finding anything helpful as a primer for the ...
12
votes
2answers
3k views

How do I run Juju on a local server?

I'd like to use juju on my server at home to get to know juju and play with it. I have multiple computers and would like to access what's on the server from any of them. When I went through the ...
2
votes
2answers
435 views

Horizon: Apache exceptions at import_module

I've deployed Openstack using juju, and everything looks normal except that I cannot browse to openstack-dashboard. I get error 500 Internal Server Error. I looked through apache2 logs at that node ...
21
votes
2answers
5k views

What is a Juju Charm?

What is a Juju Charm? What is it used for?
3
votes
1answer
1k views

What username/password does MAAS assign to nodes?

When commissioning a new node, what username/password does MAAS assign to the node after the OS is installed?
9
votes
2answers
2k views

How can I configure Juju for deployment on HP Cloud?

HP Cloud has a new cloud service out based on Open Stack. How can I configure my environments.yaml to connect to the new service?
8
votes
4answers
2k views

Does juju run on non-Ubuntu distributions?

I have been experimenting with juju for an upcoming platform evaluation Question I know I will be asked: Is it possible to run juju on non-ubuntu distros?
7
votes
1answer
1k views

How do I configure Juju for deployment on Rackspace Cloud?

I'd like to use Juju to deploy to Rackspace Cloud, how can I do this?
2
votes
2answers
323 views

Is it possible to specify an image or list of packages to install on a per-node basis in MAAS?

Or, is this a job for juju instead?
56
votes
3answers
14k views

What's the difference between Juju and Puppet/Chef?

Have tried asking 3rd party about key differences between Juju and Puppet/Chef. 3rd parties are not too familiar with Juju and could not say. They simply stated the others have a lot of momentum, and ...
7
votes
1answer
2k views

How can I configure Juju for deployment on OpenStack?

I would like to test juju charms on trystack.org, however I have not found any docu, how to configure juju for the openstack API?
8
votes
4answers
4k views

Juju stuck in “pending” state when using LXC [closed]

So I'm trying to get started with Juju, and tried to do this locally using LXC. I followed the instructions here: How do I configure juju for local usage? Unfortunately this doesn't seem to work for ...
10
votes
2answers
3k views

How can I configure multiple deployment environments for juju?

I want to be able to deploy charms both locally and to EC2. What's an example environments.yaml that has both entries? And how can I switch between them so I can just deploy to EC2 and/or LXC?
8
votes
2answers
334 views

How do I “clean up” a machine after using the local provider?

I'm doing some testing and sometimes I have issues with containers and juju. How do I clean up a machine so that I can start using the local provider "from scratch" without reinstalling?
6
votes
1answer
275 views

How do I deploy multiple stacks in an environment?

I've deployed a haproxy->lamp->mysql stack using juju. It seemed pretty straight forward and it works well from my tests. I've also seen its easy to scale a layer and add extra units to the lamp ...
4
votes
2answers
321 views

How do I use a specific AMI for juju instances?

I would like to use another AMI with juju instead of the default AMI, where do I specify this?
12
votes
1answer
2k views

How do I get started with Juju?

I want to mess with Ubuntu Juju, how do I get started?
4
votes
1answer
68 views

How do I add a relationship between two charms to pass information between them?

I am new to juju. So far I have created and started deploying one application charm and sever charm separately. But now from the application I need to add relationship to server charm and get details ...
4
votes
2answers
2k views

MaaS minimum requirements with juju-jitsu?

I've browsed through so many different sites and found so much contradictory information. As I am getting tired of this and do belive this question affects many other users, so I would like to collect ...
2
votes
2answers
611 views

Is Swift object storage a requirement?

We're in the process of deploying a private openstack instance but don't have the Swift object storage service available yet. Can juju bootstrap launch a utility instance without swift? I see that the ...
6
votes
1answer
266 views

Parsing error when bootstrapping on Windows

I am trying to get Juju working on Windows 8 but I am running in to some errors when trying to get juju to see my ssh keys: C:\Users\username> juju bootstrap error: error parsing environment ...
4
votes
1answer
601 views

Juju returns “No matching node is available” when trying to bootstrap a MaaS

This is my error while doing bootstrap , the status of nodes i added were declared and now i have accept and commising and it says comminsing started , i need help please .. clusteruser@cluster:~$ ...
3
votes
2answers
494 views

How does juju expose work?

If I expose my service, for instance teamspeak server, on what address it will be running? On my server address? For example: my server has an address of 158.37.15.167. If I deploy teamspeak from my ...
2
votes
2answers
262 views

Juju debug-hooks, how to run hook in debug terminal or get more information?

I'm having trouble deploying the Havana Openstack charms on precise for cinder, nova-cloud-controller, and quantum-gateway. I'm using MaaS running Virsh managed KVM machines. I'm getting errors with ...
2
votes
1answer
1k views

MAAS and Juju Post-Bootstrap Connection Error

I am working with a rather weird issue using MAAS and Juju where after the bootstrap, machine "0" has been successfully created, I cannot deploy any services issuing a simple juju deploy mysql. To ...
2
votes
2answers
740 views

juju status returns ERROR Invalid SSH Key

I was able to successfully juju bootstrap, but get an error with juju status. Here is what I got the first time I ran it: Please type 'yes' or 'no': The authenticity of host ...
13
votes
1answer
2k views

How does Juju “co-exist” with Chef, taking the automation process “one step further”?

It is clear from this post that Juju sits at a different layer than Chef Server. Juju sits at the orchestration or service layer, while Chef sits more at the individual server or configuration layer. ...
18
votes
1answer
510 views

Howto configure MAAS to separate PXE traffic and IPMI traffic on different subnets?

I am trying to set up a part of our network as a linux cluster. Since its a little educational for me, I choose using MAAS with JuJu. However there are some questions that boggle my mind and I was ...
13
votes
2answers
5k views

How to configure MAAS to be able to boot virtual machines

I am running a virtual (kvm) MAAS/juju setup where most of the MAAS nodes (including MAAS master) are virtual, but some are also physical nodes. The physical Dell 1950 nodes configures automatically ...
12
votes
2answers
5k views

Architecture diagram explaining the Ubuntu Cloud Infrastructure with MAAS / Openstack architecture?

I'm interested in Ubuntu Cloud Infrastructure with MAAS (based on Openstack from what I understand) but cannot find any architecture diagram which gives an overview of how MAAS works. The case is ...
8
votes
2answers
8k views

Step by Step Install of MAAS and JUJU

I am working on understanding the pieces that I am missing in being able to deploy Juju across the other MAAS nodes. I don't know If I have a step out of place, or missing a few. The MaaS server ...
4
votes
3answers
1k views

Juju cannot deploy services with MAAS

I would like deploy one or more charms with juju on MAAS environments (without OpenStack). The environment of the MAAS Controller is Ubuntu 12.10 with 2 NICs. One of the NIC is connected to a external ...
4
votes
1answer
174 views

Can juju detect down service?

I would like to have a MySQL separated on two servers with one being a master and the other a slave. Can juju detect if the master is down and promote the slave or would I have to do it manually? ...
4
votes
4answers
3k views

Invalid SSH key error in juju when using it with MAAS

This is the output of juju from a clean install with 2 nodes all running 12.04 juju bootstrap - finishes with no errors and allocates the machine to the user but still no joy after juju ...
4
votes
1answer
573 views

How to specify ec2 instance types for different services?

After I have specified a default EC2 instance type for my Juju charm, how do I override that for one of the services? For instance, the Juju tutorial deploys wordpress and mysql, and I can set the ...
2
votes
1answer
602 views

Scaled down Openstack Grizzly installation with Juju and Maas

I would like to test Openstack Grizzly deployment in the similar way described in How can I install Openstack Grizzly using Juju and MAAS? with a limited number of servers, leveraging on Virtual-Maas ...
7
votes
1answer
230 views

How can I relaunch juju daemons without stop/starting local LXC containers?

I'm using juju in local mode with LXC. I updated juju on the host with a classical: apt-get install juju And had a plentyful of python errors in juju debug-log probably because juju processes ...
6
votes
1answer
428 views

Is juju only for cloud usage?

Can Juju be used on a single server to make it easier to deploy services like MySQL and any other Charms that are available? I understand that it is a tool to deploy and manage huge cloud servers but ...
3
votes
2answers
937 views

Cannot bootstrap due to “”precise“ images in RegionOne with arches [amd64 i386]” error

I am having an issue with installing Juju and bootstrapping. I have the Swift storage setup, and the new bucket gets created. The tools have been synced, and all that looks fine. However when I ...
2
votes
1answer
182 views

Deploying a Node.js app using Juju

A little background. We are attempting to improve the deployment flow of our Node.js application, and decided to investigate Juju. I am attempting to deploy a small practice express app (which does ...
2
votes
0answers
125 views

juju bootstrap fails in Azure (BadRequest - The affinity group name is empty or was not specified.) [closed]

Commmand and results copied below. I'm aware of https://bugs.launchpad.net/juju-core/+bug/1236136 but this is a separate issue as I am using the West US region for everything. This occurs when ...
1
vote
0answers
169 views

public address null and present state pending after destroy-environment , disabling firewall and bootstrap again [closed]

I have done everystep as it was written on ubuntu 12.04 maas, but now i am stuck here for over a month and could not find how to solve it .. Please help .. When i do juju status it says : ...
6
votes
1answer
91 views

How do I deploy a specific revision of a charm?

I am trying to deploy a charm, mongodb with the following: juju deploy mongodb but the newest revision introduced a bug, or for some other reason I want to deploy an older version of the charm, how ...
4
votes
1answer
166 views

How do I prepare MAAS to serve images on OpenStack?

I've got Openstack ready with MAAS, how do I prepare the cloud with Ubuntu images so I can deploy it with Juju?
4
votes
1answer
269 views

hook failed: “shared-db-relation-changed” when using OpenStack in the same system as Juju/MAAS

I have been trying to setup OpenStack on 14.04 using one machine. I have managed to get MAAS setup and JUJU bootstrapped with two machines, one machine to MAAS and another node that I am trying to ...
4
votes
1answer
3k views

Why does upstart fail to start my juju service with Unknown job: juju-ubuntu-0?

I'm having issues launching juju on an lxc container through regular juju deploy commands: juju bootstrap juju deploy ubuntu The ubuntu juju status continually says pending. The LXC starts, and I ...
4
votes
1answer
442 views

Can I use juju with LXC in a non-local configuration?

I've looked at this post for setting up juju on a local environment with lxc. However, is there a way to use juju with lxc in a non-local environment? I am looking at a scenario where lxc containers ...
3
votes
1answer
216 views

(JuJu) How to install “ubuntu-12.04-server-cloudimg-amd64.tar.gz” manually?

Because of an error over using juju , I've downloaded these two files: https://cloud-images.ubuntu.com/server/releases/precise/release-20140227/ubuntu-12.04-server-cloudimg-amd64.tar.gz ...
3
votes
1answer
798 views

Juju services are not deploying correctly

Deploying a charm to your MAAS Now you're ready for the most exciting part: deploying a charm to your MAAS! juju deploy mysql MAAS will now allocate a node to Juju and Juju will deploy the ...