Juju is a next generation service orchestration framework. It has been likened to APT for the cloud.

learn more… | top users | synonyms (2)

2
votes
1answer
167 views

Problems with Ceph installation in Juju deployed OpenStack environment

We are running in to an issue setting up ceph to be used as backend for cinder using the charms. Our environment consists of OpenStack icehouse on Ubuntu 14.04 (Trusty). Most of the documents on ceph ...
4
votes
2answers
220 views

what is a configuration to allow access to juju-gui in local provider

I want to install juju-gui using local provider (re lxc) on a cloud instance. However, the problem I have is that juju-gui will be installed into an lxc container itself and that container will be a ...
1
vote
1answer
61 views

Is there a way to statically map MAC addresses to IP addresses for machines in MAAS?

I have few (11) servers in MAAS that will be used for OpenStack deployment. I want to give specific IP addresses to specific nodes in the MAAS. Is there a way to map the MAC address to IP address so ...
0
votes
1answer
51 views

juju charm failed in local lxc

So I want to run my web application in the local lxc provider using juju.my web application is maven build application. So I create my charm and try to run it locally. In hooks I have installed java ...
2
votes
1answer
47 views

I cannot access the juju-gui even though I have installed it and it shows me service started

I cannot access the juju-gui even though I have installed it and it shows me service started. I have installed it on the same maas server. It shows me agent state: started. The public address given ...
1
vote
1answer
44 views

how to view multiple juju environment on juju-gui

i've added 2 environment on juju called them en01 and en02 of type MaaS, is there a way to view/select them on juju-gui to manage the services deployed? thanks
5
votes
3answers
277 views

How to deploy multiple juju services on the same server with MaaS

I have 6 services that I need to deploy with 5 physical servers. Would it be ok to deploy juju gui with haproxy? How would you deploy multiple services to one server. I saw some documentation for ...
0
votes
1answer
403 views

Juju bootstrap - 403 Forbidden “not allowed to start up this node”

I try to deploy MAAS/Juju for the first time and I have some problems when i try to bootstrap JuJu. Here's my errors : root@maas-server:~/.juju# juju bootstrap Launching instance WARNING picked ...
10
votes
2answers
3k views

How can I configure multiple deployment environments for juju?

I want to be able to deploy charms both locally and to EC2. What's an example environments.yaml that has both entries? And how can I switch between them so I can just deploy to EC2 and/or LXC?
4
votes
1answer
218 views

When running locally, does Juju use the host machine's APT cache?

When juju fetches packages for a unit, does it make use of the host system's APT cache? I'm asking this because in my case, bandwidth is limited and I am doing some charm development. It is not ...
3
votes
1answer
28 views

On what events the “install” hook get triggered

I am looking at this doc https://juju.ubuntu.com/docs/authors-charm-hooks.html which says the install hook is run first, but it does not specify which triggers the "install" hook. Is "juju deploy" ...
0
votes
2answers
145 views

ip forwarding set up so the nodes can get to the internet through your MAAS host?

how to set up ip forwarding, so the nodes can get to the internet through your MAAS host? although my setup runs maas, commissions servers, turns nodes on and off, nodes are at ready state. i have a ...
1
vote
1answer
127 views

juju-quickstart: error: bad API response: cannot upload charm to provider storage: 500 INKApi Error

I have been able to use Juju from my home machine, however, when I attempt to use it from my work machine (which sits behind a proxy) I get: (Output from juju quickstart --debug) retrieving the Juju ...
2
votes
1answer
169 views

What are the ports used by Juju for its orchestration services?

What ports are required to be open on Ubuntu Cloud Guests running juju client instances? As far as I understand, Zookeeper needs to communicate with all its nodes -- So that is one requirement.. ...
-1
votes
1answer
2k views

How add a network printer with command line to Ubuntu 14.04

Description: In MAAS i need a node with a network printer , so I need some command to add in JUJU install to add network printer . If there is a solution let me know. Thanks
0
votes
1answer
30 views

Deploy web application to local juju enviroment

I am new to juju. So far i have installed juju and configure in local Ubuntu server. I have web application and i want to deploy this web app into juju server. I read more articles but they said crate ...
0
votes
2answers
109 views

Error boostraping juju maas juju-db already running

I'm trying to bootstrap a juju maas environment. I get the error "job is already running: juju-db". I destroy the environment run again and get the same thing. It brings up a maas node and does ...
1
vote
1answer
30 views

How can build relation between Rabbitmq-Server (as buffer for request interface) for my owm locla charm( process the requests)

The case is here: I decide to use Rabittmq-Server as interface for request input and using my own charm fro connect to the rabitt mq and process the the requests!. How can I relate this two ( my ...
0
votes
0answers
34 views

Heat Charm Fails to Authorize Image

Posted a similar question on openstack, https://ask.openstack.org/en/question/35227/heat-fails-on-image-authorization/, as I am not sure if this is an issue with heat or charm setup. After adding heat ...
1
vote
2answers
1k views

Reset MAAS after loosing Juju configuration?

I managed to delete my Juju client cofiguration without running a juju destroy-environment first, leaving my MaaS in a state where I could not deploy to it. I would get the following (conflicting) ...
10
votes
3answers
4k views

How do I deploy an OpenStack cloud with Juju?

I'd like to get a test cloud up and running in preparation for a possible deployment of 12.04. I messed with the UEC a bit, but have had a much harder time finding anything helpful as a primer for the ...
4
votes
1answer
353 views

In a MAAS/juju setup, is it possible to deploy multiple charms (eg. mysql and wordpress) on one single MAAS node?

Well the headline basically says it all. I have a small testing environment running, and this question pops up. Not all charms need a whole node for them selves. Is it possible for me to deploy both ...
2
votes
2answers
462 views

Ubuntu Juju local configure failed

When i run bootstrap in How do I configure juju for local usage? i got this error. I have done the same steps. So why that error is comming? Then i checked the permission for index.json file i changed ...
1
vote
3answers
407 views

juju bootstrap using maas unable to ssh into nodes

Trusty : 14.04 Trying to bootstrap JUJU using maas environment using juju -v --debug bootstrap -e maas but the process gets stuck in the lines shown below and finally times out. My maas nodes are in ...
2
votes
1answer
116 views

MAAS/juju not cleaning up nodes

I've been playing with MAAS and juju (using 14.04 LTS) for the first time and have a single node in my cluster which PXE boots fine via WOL when I do a juju bootstrap. I'm having an issue where after ...
0
votes
1answer
252 views

MAAS / Juju bootstrap - node installation via PXE loops at partitioner step

I am trying to setup a MAAS / Juju / Openstack environment. Currently I've installed Juju on the MAAS server and am trying to run the juju bootstrap command. In the terminal I can see (using -v) ...
0
votes
1answer
28 views

Enterprise Support for Juju

From whatever I have read and come to know about Juju, it is still a very much open source project. Does it also have an enterprise version/support subscription? More akin to Chef hosted services and ...
18
votes
1answer
694 views

Howto configure MAAS to separate PXE traffic and IPMI traffic on different subnets?

I am trying to set up a part of our network as a linux cluster. Since its a little educational for me, I choose using MAAS with JuJu. However there are some questions that boggle my mind and I was ...
1
vote
1answer
140 views

MAAS and Openstack Network

Trying to figure out the best way for openstack and MAAS networks to co-exist. Assuming MAAS used 10.0.0.0/24 for provisioning of various openstack nodes, once openstack, with quantum, is deployed ...
1
vote
0answers
829 views

Openstack Neutron - Cannot Access Tenant Router Gateway

Using cs:trusty/quantum-gateway-2, cs:trusty/nova-cloud-controller-40 and cs:trusty/nova-compute-2, while following Neutron setup as delineated in ...
0
votes
1answer
19 views

Juju - configuring a service by clicking on charm with stand-alone implementation - LXCa

I brought up a local/stand-alone JUJU environment that creates LXCs for each service deployed. What I notices is that I can't be redirected to the service configuration screen when clicking on the ...
3
votes
1answer
101 views

juju mongodb charm not found

On an Ubuntu 14.04 (trusty) host, this command fails: juju deploy mongodb ERROR charm not found: cs:trusty/mongodb I am attempting to follow this documentation: ...
0
votes
0answers
96 views

Unable to add nodes to ubuntu MAAS server on static vlan

I'm trying to setup the private cloud in my data center but having problem. I've many servers with good configuration to test with. All the servers are connected to many switches on a vlan with static ...
7
votes
2answers
443 views

How do I force Juju to deploy a fresh charm, not a cached one?

Is there a way with juju commands to clear the juju charm cache for a particular charm from a running bootstrap node? I'm writing a charm and for during development when I've made ...
9
votes
2answers
2k views

How can I configure Juju for deployment on HP Cloud?

HP Cloud has a new cloud service out based on Open Stack. How can I configure my environments.yaml to connect to the new service?
3
votes
3answers
75 views

What does “LDS” stand for in the openstack reference implementation?

Looking on this page, I see "LDS" mentioned. http://www.ubuntu.com/cloud/ubuntu-openstack/reference-architecture Go to the "Services Virtualized High Availability" tab, and look at the virtualized ...
2
votes
1answer
296 views

juju spends bootstrap-timeout with a final message it cannot find /var/lib/juju/nonce.txt

I build two VMware's machines. First one with MAAS, second one with a fresh installation from MAAS. Region controller was installed with Ubuntu 12.04 distribution, and upgraded (. Node computing was ...
0
votes
1answer
121 views

Add Nodes to MAAS for JUJU Bundle

This question is similar to Can juju add-machine be used to prepare a machine for service deployment?, with some differences; however. I am trying to find the fastest way of deploying juju bundles on ...
1
vote
1answer
63 views

Upload all release versions of tools with juju's local (lxc) provider?

I'm using the local lxc provider on trusty, with the default-series: trusty option. Whenever I try to deploy a non-trusty charm, it never finishes (stays in pending state), and the log says ...
3
votes
1answer
447 views

How do I configure Juju for use on Azure?

I usually setup my entire stack with apt-get packages, however I thought I might give Juju a try. I'm using a fresh copy of Ubuntu 13.04 on Azure. I managed to install install the juju package and ...
0
votes
1answer
23 views

how to integrate juju for use hpcloud [duplicate]

Kindly guide me through to configure environments.yaml file for hpcloud so that juju shall access HPCloud for deploying instances. thanks, Guru
2
votes
1answer
73 views

What types are allows in config.yaml in juju charms?

The "config.yaml" settings inside juju charms contain a type - e.g.: pip_no_index: default: False type: boolean description: "Prevent pip connecting to Python Package Index to download ...
2
votes
2answers
1k views

juju http-proxy and no_proxy settings

I'm setting up an environment with juju and maas. The maas environment has no direct internet connection, a proxy must be used. I have configured the juju environment's proxy using juju set-env ...
0
votes
1answer
130 views

Machines required Juju bootstrap

root@ubuntu:~# juju status environment: maas machines: "0": agent-state: started agent-version: 1.18.4.1 dns-name: BLD15-A4.maas instance-id: ...
49
votes
1answer
14k views

How do I configure juju for local usage?

I'm too cheap to pay for EC2, and I don't have enough servers to set up my own openstack, how do I configure juju to use Linux Containers (LXC) on something like my laptop?
0
votes
1answer
166 views

MAAS JUJU Bootstrap Connection Error

I Have these config: 1) maas on VM 2) 3 ready node in VM 3) when i try to juju bootstrap -- debug I see this error It tries to connect https://streams.canonical.com/juju/tools/streams/v1/index.json ...
0
votes
1answer
250 views

Where to see the complete list of juju charms available?

that sounds like such a basic question to ask, but I can't seem to find a good answer. Where to see the complete list of juju charms available? Except for the official 'Juju Charms Store' website ...
2
votes
1answer
39 views

How to Access HBase after JUJU

I have used the hbase charm with Juju to successfully deploy hbase, however I no idea how to access the instance of hbase now! Normally I would use the shell provided in the ../hbase/bin/ directory ...
1
vote
1answer
641 views

Cannot bootstrap due to “maas” environment not found

I would like to test MAAS + JUJU + OpenStack (I followed the documentation on maas.ubuntu.org) I already made a test environment: 1 MAAS server wich will also run JuJu 10 KVM servers for Openstack ...
0
votes
2answers
282 views

Juju Openstack bundle: Can't launch an instance

Deployed bundle:~makyo/openstack/2/openstack, on top of 7 physical boxes and 3 virtual ones. After changing vip_iface strings to point to right devices, e.g., br0 instead of eth0, and defining ...