Juju is a next generation service orchestration framework. It has been likened to APT for the cloud.

learn more… | top users | synonyms (2)

0
votes
1answer
68 views

Juju bootstrap - 403 Forbidden “not allowed to start up this node”

I try to deploy MAAS/Juju for the first time and I have some problems when i try to bootstrap JuJu. Here's my errors : root@maas-server:~/.juju# juju bootstrap Launching instance WARNING picked ...
10
votes
2answers
3k views

How can I configure multiple deployment environments for juju?

I want to be able to deploy charms both locally and to EC2. What's an example environments.yaml that has both entries? And how can I switch between them so I can just deploy to EC2 and/or LXC?
4
votes
1answer
203 views

When running locally, does Juju use the host machine's APT cache?

When juju fetches packages for a unit, does it make use of the host system's APT cache? I'm asking this because in my case, bandwidth is limited and I am doing some charm development. It is not ...
3
votes
1answer
17 views

On what events the “install” hook get triggered

I am looking at this doc https://juju.ubuntu.com/docs/authors-charm-hooks.html which says the install hook is run first, but it does not specify which triggers the "install" hook. Is "juju deploy" ...
0
votes
2answers
47 views

ip forwarding set up so the nodes can get to the internet through your MAAS host?

how to set up ip forwarding, so the nodes can get to the internet through your MAAS host? although my setup runs maas, commissions servers, turns nodes on and off, nodes are at ready state. i have a ...
0
votes
0answers
31 views

juju install error : couldn't connect to host

I'm trying to install juju on MAAS ubuntu 12.04.04 . I get the following error :- root@ubuntu:~# sudo add-apt-repository ppa:juju/stable Traceback (most recent call last): File ...
1
vote
1answer
38 views

juju-quickstart: error: bad API response: cannot upload charm to provider storage: 500 INKApi Error

I have been able to use Juju from my home machine, however, when I attempt to use it from my work machine (which sits behind a proxy) I get: (Output from juju quickstart --debug) retrieving the Juju ...
2
votes
1answer
147 views

What are the ports used by Juju for its orchestration services?

What ports are required to be open on Ubuntu Cloud Guests running juju client instances? As far as I understand, Zookeeper needs to communicate with all its nodes -- So that is one requirement.. ...
0
votes
0answers
22 views

JUJU Azure bootstrap fails when updating packages

Processing triggers for libc-bin ... ldconfig deferred processing now taking place Reading package lists... Building dependency tree... Reading state information... The following extra packages will ...
-1
votes
1answer
37 views

How add a network printer with command line to Ubuntu 14.04

Description: In MAAS i need a node with a network printer , so I need some command to add in JUJU install to add network printer . If there is a solution let me know. Thanks
0
votes
0answers
20 views

how do i make a hybrid juju-quickstart?

My question is when using the juju-quickstart, how can i configure it so that a cloud service provides the IP address and storage, while i handle memory and cpu?
0
votes
1answer
22 views

Deploy web application to local juju enviroment

I am new to juju. So far i have installed juju and configure in local Ubuntu server. I have web application and i want to deploy this web app into juju server. I read more articles but they said crate ...
0
votes
2answers
64 views

Error boostraping juju maas juju-db already running

I'm trying to bootstrap a juju maas environment. I get the error "job is already running: juju-db". I destroy the environment run again and get the same thing. It brings up a maas node and does ...
1
vote
1answer
23 views

How can build relation between Rabbitmq-Server (as buffer for request interface) for my owm locla charm( process the requests)

The case is here: I decide to use Rabittmq-Server as interface for request input and using my own charm fro connect to the rabitt mq and process the the requests!. How can I relate this two ( my ...
0
votes
0answers
14 views

Heat Charm Fails to Authorize Image

Posted a similar question on openstack, https://ask.openstack.org/en/question/35227/heat-fails-on-image-authorization/, as I am not sure if this is an issue with heat or charm setup. After adding heat ...
1
vote
0answers
33 views

“initialising SSH storage failed” on bootstrap with manual provider

I'm trying to use the manual provider to setup a juju environment on a remote server; when I try juju bootstrap I get: ERROR initialising SSH storage failed: failed to create storage dir: ...
1
vote
2answers
903 views

Reset MAAS after loosing Juju configuration?

I managed to delete my Juju client cofiguration without running a juju destroy-environment first, leaving my MaaS in a state where I could not deploy to it. I would get the following (conflicting) ...
1
vote
1answer
205 views

MAAS JUJU cloud-init-nonet waiting for network device

I have a node that has successfully been commissioned into a MAAS pool, i.e., got Declared->Commissioned->Ready. After it got to Ready state, I issued juju add-machine to put it in Allocated state; ...
3
votes
2answers
810 views

Switching Juju lxc bridge

I've set up Juju running in LXC, and I'm attempting to expose it to the internal network. I'm generally following this question to point lxc to my existing bridge (eth-br0). I've edited ...
1
vote
0answers
59 views

deploying charms using juju fails with tcp connection timed out

Environment: juju bootstrapped environment with MAAS [ Juju 1.19.x] Connected to internet: wget https://store.juju.ubuntu.com/charm-info?charms=cs%3Atrusty%2Fjuju-gui-3 works with the charm ...
8
votes
3answers
2k views

How do I deploy an OpenStack cloud with Juju?

I'd like to get a test cloud up and running in preparation for a possible deployment of 12.04. I messed with the UEC a bit, but have had a much harder time finding anything helpful as a primer for the ...
4
votes
1answer
319 views

In a MAAS/juju setup, is it possible to deploy multiple charms (eg. mysql and wordpress) on one single MAAS node?

Well the headline basically says it all. I have a small testing environment running, and this question pops up. Not all charms need a whole node for them selves. Is it possible for me to deploy both ...
1
vote
2answers
223 views

Ubuntu Juju local configure failed

When i run bootstrap in How do I configure juju for local usage? i got this error. I have done the same steps. So why that error is comming? Then i checked the permission for index.json file i changed ...
1
vote
3answers
67 views

juju bootstrap using maas unable to ssh into nodes

Trusty : 14.04 Trying to bootstrap JUJU using maas environment using juju -v --debug bootstrap -e maas but the process gets stuck in the lines shown below and finally times out. My maas nodes are in ...
2
votes
1answer
54 views

MAAS/juju not cleaning up nodes

I've been playing with MAAS and juju (using 14.04 LTS) for the first time and have a single node in my cluster which PXE boots fine via WOL when I do a juju bootstrap. I'm having an issue where after ...
0
votes
1answer
63 views

MAAS / Juju bootstrap - node installation via PXE loops at partitioner step

I am trying to setup a MAAS / Juju / Openstack environment. Currently I've installed Juju on the MAAS server and am trying to run the juju bootstrap command. In the terminal I can see (using -v) ...
0
votes
1answer
25 views

Enterprise Support for Juju

From whatever I have read and come to know about Juju, it is still a very much open source project. Does it also have an enterprise version/support subscription? More akin to Chef hosted services and ...
18
votes
1answer
508 views

Howto configure MAAS to separate PXE traffic and IPMI traffic on different subnets?

I am trying to set up a part of our network as a linux cluster. Since its a little educational for me, I choose using MAAS with JuJu. However there are some questions that boggle my mind and I was ...
1
vote
1answer
62 views

MAAS and Openstack Network

Trying to figure out the best way for openstack and MAAS networks to co-exist. Assuming MAAS used 10.0.0.0/24 for provisioning of various openstack nodes, once openstack, with quantum, is deployed ...
1
vote
0answers
251 views

Openstack Neutron - Cannot Access Tenant Router Gateway

Using cs:trusty/quantum-gateway-2, cs:trusty/nova-cloud-controller-40 and cs:trusty/nova-compute-2, while following Neutron setup as delineated in ...
0
votes
1answer
16 views

Juju - configuring a service by clicking on charm with stand-alone implementation - LXCa

I brought up a local/stand-alone JUJU environment that creates LXCs for each service deployed. What I notices is that I can't be redirected to the service configuration screen when clicking on the ...
2
votes
1answer
38 views

juju mongodb charm not found

On an Ubuntu 14.04 (trusty) host, this command fails: juju deploy mongodb ERROR charm not found: cs:trusty/mongodb I am attempting to follow this documentation: ...
0
votes
0answers
44 views

Unable to add nodes to ubuntu MAAS server on static vlan

I'm trying to setup the private cloud in my data center but having problem. I've many servers with good configuration to test with. All the servers are connected to many switches on a vlan with static ...
7
votes
2answers
401 views

How do I force Juju to deploy a fresh charm, not a cached one?

Is there a way with juju commands to clear the juju charm cache for a particular charm from a running bootstrap node? I'm writing a charm and for during development when I've made ...
9
votes
2answers
2k views

How can I configure Juju for deployment on HP Cloud?

HP Cloud has a new cloud service out based on Open Stack. How can I configure my environments.yaml to connect to the new service?
2
votes
3answers
45 views

What does “LDS” stand for in the openstack reference implementation?

Looking on this page, I see "LDS" mentioned. http://www.ubuntu.com/cloud/ubuntu-openstack/reference-architecture Go to the "Services Virtualized High Availability" tab, and look at the virtualized ...
1
vote
1answer
143 views

juju spends bootstrap-timeout with a final message it cannot find /var/lib/juju/nonce.txt

I build two VMware's machines. First one with MAAS, second one with a fresh installation from MAAS. Region controller was installed with Ubuntu 12.04 distribution, and upgraded (. Node computing was ...
0
votes
1answer
42 views

Add Nodes to MAAS for JUJU Bundle

This question is similar to Can juju add-machine be used to prepare a machine for service deployment?, with some differences; however. I am trying to find the fastest way of deploying juju bundles on ...
1
vote
1answer
40 views

Upload all release versions of tools with juju's local (lxc) provider?

I'm using the local lxc provider on trusty, with the default-series: trusty option. Whenever I try to deploy a non-trusty charm, it never finishes (stays in pending state), and the log says ...
3
votes
1answer
407 views

How do I configure Juju for use on Azure?

I usually setup my entire stack with apt-get packages, however I thought I might give Juju a try. I'm using a fresh copy of Ubuntu 13.04 on Azure. I managed to install install the juju package and ...
0
votes
1answer
19 views

how to integrate juju for use hpcloud [duplicate]

Kindly guide me through to configure environments.yaml file for hpcloud so that juju shall access HPCloud for deploying instances. thanks, Guru
2
votes
1answer
41 views

What types are allows in config.yaml in juju charms?

The "config.yaml" settings inside juju charms contain a type - e.g.: pip_no_index: default: False type: boolean description: "Prevent pip connecting to Python Package Index to download ...
2
votes
2answers
421 views

juju http-proxy and no_proxy settings

I'm setting up an environment with juju and maas. The maas environment has no direct internet connection, a proxy must be used. I have configured the juju environment's proxy using juju set-env ...
0
votes
1answer
42 views

Machines required Juju bootstrap

root@ubuntu:~# juju status environment: maas machines: "0": agent-state: started agent-version: 1.18.4.1 dns-name: BLD15-A4.maas instance-id: ...
46
votes
1answer
13k views

How do I configure juju for local usage?

I'm too cheap to pay for EC2, and I don't have enough servers to set up my own openstack, how do I configure juju to use Linux Containers (LXC) on something like my laptop?
0
votes
1answer
82 views

MAAS JUJU Bootstrap Connection Error

I Have these config: 1) maas on VM 2) 3 ready node in VM 3) when i try to juju bootstrap -- debug I see this error It tries to connect https://streams.canonical.com/juju/tools/streams/v1/index.json ...
0
votes
1answer
62 views

Where to see the complete list of juju charms available?

that sounds like such a basic question to ask, but I can't seem to find a good answer. Where to see the complete list of juju charms available? Except for the official 'Juju Charms Store' website ...
2
votes
1answer
31 views

How to Access HBase after JUJU

I have used the hbase charm with Juju to successfully deploy hbase, however I no idea how to access the instance of hbase now! Normally I would use the shell provided in the ../hbase/bin/ directory ...
1
vote
1answer
172 views

Cannot bootstrap due to “maas” environment not found

I would like to test MAAS + JUJU + OpenStack (I followed the documentation on maas.ubuntu.org) I already made a test environment: 1 MAAS server wich will also run JuJu 10 KVM servers for Openstack ...
0
votes
2answers
101 views

Juju Openstack bundle: Can't launch an instance

Deployed bundle:~makyo/openstack/2/openstack, on top of 7 physical boxes and 3 virtual ones. After changing vip_iface strings to point to right devices, e.g., br0 instead of eth0, and defining ...