Juju is a next generation service orchestration framework. It has been likened to APT for the cloud.

learn more… | top users | synonyms (2)

1
vote
1answer
592 views

Ubuntu Openstack cloud-installer error: kvm container creation failed

I'm trying to install OpenStack on an older server using the Ubuntu cloud-installer. I have virtualization enabled in BIOS and kvm-ok tells me that I'm good to use KVM with acceleration. $ kvm-ok ...
1
vote
1answer
89 views

how to deploy puppet master and puppet agent with juju?

I've an ubuntu 14.04lts server with MaaS and Juju, and both of them are installed via ppa stable. I'd like to deploy puppet master on a Juju node and puppet agent on the other node present on my ...
1
vote
2answers
546 views

Error bootstrapping juju environment maas, crypto/rsa: verification error

I bootstrapped the juju environment for maas. It was working fine but, my bootstrapped node formatted due to network boot. I then removed juju and deleted the environments directory and reinstalled ...
1
vote
1answer
38 views

Cannot deploy juju charms

I have a switch connecting all my nodes and NIC 1 from the maas server. NIC 2 is connected to the internet(external access). I enabled IP forwarding and NAT to allow our nodes to get external access. ...
1
vote
1answer
34 views

Charm Using RabbitMQ

Here is problem: 1) I have a RabbitMQ on JUJU 2) I have a charm , it tries to use RabbitMQ, written by java , I'll call it myCharm. 3) myCharm needs Hostname or ip address of rabbitMQ How can I ...
1
vote
1answer
188 views

How to give a Juju charm a static ip address - wordpress

I have a wordpress charm installed via juju. In order for me to access this charm through public ip, I port forwarded the ip into my server's public ip address. Recently, the ip address of the ...
1
vote
1answer
119 views

juju illegal base64 data at input byte 9

After bootstrap a environment via manual provisioning, juju give me the following output for juju status: ERROR Unable to connect to environment "manual". Please check your credentials or use 'juju ...
1
vote
1answer
94 views

Is there a way to statically map MAC addresses to IP addresses for machines in MAAS?

I have few (11) servers in MAAS that will be used for OpenStack deployment. I want to give specific IP addresses to specific nodes in the MAAS. Is there a way to map the MAC address to IP address so ...
1
vote
3answers
800 views

juju bootstrap using maas unable to ssh into nodes

Trusty : 14.04 Trying to bootstrap JUJU using maas environment using juju -v --debug bootstrap -e maas but the process gets stuck in the lines shown below and finally times out. My maas nodes are in ...
1
vote
1answer
82 views

Upload all release versions of tools with juju's local (lxc) provider?

I'm using the local lxc provider on trusty, with the default-series: trusty option. Whenever I try to deploy a non-trusty charm, it never finishes (stays in pending state), and the log says ...
1
vote
1answer
273 views

MAAS and Openstack Network

Trying to figure out the best way for openstack and MAAS networks to co-exist. Assuming MAAS used 10.0.0.0/24 for provisioning of various openstack nodes, once openstack, with quantum, is deployed ...
1
vote
1answer
34 views

How can I get the file from local server on my intranet instead of internet in hook install

I try to create hook--> install for my charm ( home-made) , I have the Tar. As I see i can get the tar from internet link by wget and then save it on local hard. But if I went to get same file from ...
1
vote
1answer
34 views

How can build relation between Rabbitmq-Server (as buffer for request interface) for my owm locla charm( process the requests)

The case is here: I decide to use Rabittmq-Server as interface for request input and using my own charm fro connect to the rabitt mq and process the the requests!. How can I relate this two ( my ...
1
vote
2answers
638 views

Can I set up MAAS and Juju on one machine?

Here is what I want to setup: MaaS on a single PC MaaS providing the host OS for 4 VMs (3 LXC + 1 KVM) Using Juju to deploy services on the 4 VMs (nodes on MaaS) How can I accomplish this?
1
vote
1answer
169 views

juju handshake node error..why (juju.state open.g:93 TLS handshake failed: x509:certificate has expired or is not yet valid

there is an error on the node..reads 2014-05-25 14:00:00 ERROR juju.state open.g:93 TLS handshake failed: x509: certificate has expired or is not yet valid 2014-05-25 14:00:01 ERROR juju.state ...
1
vote
1answer
135 views

juju sync-tools on maas 502 bad gateway error

1) I have maas server on Vm with 4 node all ubuntu 14.04 trusty 2) I use server ( host of VMs) as JUJU server i tried to bootstrap juju i got this error: ERROR juju.cmd supercommand.go:300 gomaasapi: ...
1
vote
1answer
348 views

How can I configure the public and cluster network with the juju ceph charm

I deployed ceph via juju and the ceph charm. My servers have 3 NIC's (eth0 for management, eth1, public storage network, eth2 for cluster network). When I deploy ceph via juju it installs all the ...
1
vote
1answer
111 views

ERROR error parsing environment “maas”: no public ssh keys found..is it a bug

no matter what i do i get ERROR error parsing environment "maas": no public ssh keys found My environments.yaml file. (authorized key added as per another ask, ubuntu help example) juju: ...
1
vote
2answers
307 views

How to reset MAAS 1.5 , LTS 14.04 Setting

I've been experimenting with MAAS, following https://insights.ubuntu.com/2013/11/15/interested-in-maas-and-juju-heres-how-to-try-it-in-a-vm/, using 14.04. I must done something wrong, as I am not able ...
1
vote
1answer
71 views

What is the proper way to use a package cache with MAAS or Juju?

I use an apt-cacher-ng server on one of the computers on my network. I'm new trying to set up OpenStack, using Juju on MAAS. Is there a way to tell the machines Juju will be setting up to use this ...
1
vote
2answers
92 views

Juju local shared folder

I'm using juju local and I want to create a shared folder between the host and one of the juju machines. How can I accomplish this? I attempted these instructions with no success : ...
1
vote
1answer
314 views

juju error executing lxc-clone local-provider

I'm trying to use juju with local-provider to setup juju-gui (and owncloud eventually). After "juju deploy juju-gui", juju status shows the error: agent-state-info: '(error: error executing ...
1
vote
1answer
78 views

Error when using Juju Client on Windows 8.1 juju bootstrap to aws get AWS Acess key id you provided

Question what could be the source of this error: Error The AWS Access Key Id you provided does not exist in our records. Setup: Windows 8.1 running the 1.16.6 windows juju client access via ...
1
vote
1answer
69 views

Getting git error on juju charm-upgrade [closed]

I'm playing with the upgrade-charm command to better understand how it works and what happens during it. I'm using Ubuntu 14.04. According to the log JUJU tries to use the git client for a charm ...
1
vote
1answer
398 views

Guide for using Juju in deploying to a Raspberry Pi

Where is a small-c canonical guide located for using Juju to deploy services to a Raspberry Pi or similar ARM board?
1
vote
1answer
331 views

Do I need to put image metadata in a private bucket?

I'm experimenting using Juju (16.6) to deploy services to our private Openstack cloud and have noticed a couple of issues. When bootstrapping a new environment, Juju apparently wants to look in the ...
1
vote
1answer
201 views

MAAS add virtual node - 'namedtuple_as_object' error

I have a KVM-based virtual machine up and running on a server that's also running MAAS. I'm following the instructions here: http://maas.ubuntu.com/docs/nodes.html#virtual-machine-nodes to add the VM ...
1
vote
1answer
718 views

MAAS, JUJU help: MAAS Nodes have no access to the internet while PXE booting

We are trying to implement a cloud setup in our college using MAAS/Juju/OpenStack. The college has its own DHCP server and we don't have access to that. So, we can't set next-server to our MAAS ...
1
vote
1answer
822 views

configure private openstack with juju

We have a working openstack (grizzly) cloud and want configure juju to work with it. I follows https://help.ubuntu.com/community/UbuntuCloudInfrastructure. But I can not find "Juju Environment Config" ...
1
vote
1answer
259 views

Error deploying services in juju local

After following all the guides, I've managed to configure juju in the local environment inside a virtualbox guest machine, but after deploying any service (wordpress,juju-gui), they load to the point ...
1
vote
1answer
413 views

error: “net.core.wmem_default” is an unknown key on Juju local provider

I create and deploy HPCC charm on local provider. For single node It run OK. For multiple nodes after configure the cluster one of the component fails to start with error: /proc/sys/net/core/rmem_max ...
1
vote
1answer
76 views

Juju bootstrap to CloudVPS OpenStack machine has 3 ip's

When bootstrapping to the new CloudVPS beta OpenStack cloud, the bootstrap instance is getting three separate IP's allocated to it. Is this normal for Juju to do or require when bootstrapping to ...
1
vote
1answer
2k views

Openstack instanses can't accept floating IP

Hello when i create an instance in openstack dashboard and try to allocate an ip address i see : Error: 404-{u'NeutronError': {u'message': u'External network a522b82c-7640-4108-8bdb-72e6218aace7 ...
1
vote
1answer
543 views

juju local openstack deploy - how to reduce the memory/number of lxc containers?

I'm trying to setup openstack with vagrant inside a virtualbox guest, by following the juju instructions in the ubuntu cloud infrastructure wiki page and this askubuntu page. My github project is ...
1
vote
1answer
168 views

Juju gui problem with login

Hello i have installed maas and juju, now that i want to login juju's gui there is user and password user-admin password i have tried the password from my environments.yaml but no success. I use ...
1
vote
1answer
301 views

Juju “RegionOne” does not allow access to all required services

Hi i am trying to configure juju over openstack under Ubuntu. Successfully configure the basic authentication stuff on juju enviroment.yalm but when i try to bootstrap juju this errors stop me. Anyone ...
1
vote
1answer
239 views

maas nodes login incorrect

I'm testing Ubuntu12.04 MAAS with juju ,i installed the maas server and add 2 nodes now the nodes allocated to admin user when i start them login is required i tried the admin username and password ...
1
vote
1answer
56 views

MAAS server can't find juju server

I installed MAAS(Computer 1) and Juju(Computer 2) with router. I checked that both of installation is complete. But, It didn't work any juju operation(status, deploy, etc..). Maybe, MAAS server ...
1
vote
1answer
143 views

how to decipher a bundle from juju

how do i decipher a juju bundle? For example its a wiki bundle with instances, etc and mysql configuration with memcache. The charms deploy no relationships are established or none of the services ...
1
vote
1answer
266 views

juju openstack bundle

Machine Configuration: Dell R900 32GB RAM, 4 Quad Core @ 2.4 (16 cores) 1 Virtual Drive configured 500 GB My question for the day is I am deploying the openstack bundle with juju using 12.04 LTS. ...
1
vote
2answers
1k views

Juju status machines 1 2 3 instance-id: pending forever

I am building a MAAS environment with 4 physical machines. 1 is running MAAS and Ubuntu 13.04 3 are MAAS nodes running Ubuntu 12.10 (machine 0,1,2) My problem is that after juju bootstrap only ...
1
vote
1answer
270 views

Is it possible to use Juju on MAAS nodes not connected to Internet?

At present I'm testing Ubuntu Juju with MAAS nodes, on a 12.04 server. For this I'm using Virtual Boxes. Actually, I am wondering if it possible to deploy Juju charms on MAAS nodes which does not ...
1
vote
1answer
167 views

Juju boostrap for EC2 fails with access denied, but working credentials

To make a long story short, I'm using s3cmd to manipulate S3 buckets and have copied the access credentials over to my environments.yaml under a new "smlamazon" section, but this fails at bootstrap ...
1
vote
1answer
265 views

If a Juju HA Cluster charm fails to deploy, will removing the HA cluster charm service mess up the service that was behind it?

I deployed the Havana version of Openstack Keystone, and an the also deployed the HA Cluster charm for it and added a relation. It failed to deploy (I assume because I failed to generate a key instead ...
1
vote
1answer
462 views

Is the rewrite module activated for nginx in the Wordpress juju

Is the rewrite module activated for nginx in the Wordpress juju? When I change the permalink to anything other than default I get bad gateway. rewrite is mandatory for buddypress to function ...
1
vote
1answer
561 views

juju bootstrap fails with a local environment, why?

Each time I try to bootstrap juju using a local enviroment it fails starting the juju-db-braiam-local script as follows: $ sudo juju --debug --verbose bootstrap 2013-10-20 02:28:53 INFO ...
1
vote
1answer
203 views

How do I keep my WordPress content in a private git repository?

I have got my wordpress up and running. Now I want the wp-content to sync with my private git. How do I modify the following code to include username and password to my private git? juju set ...
1
vote
1answer
215 views

How do I fix a “failed to list contents of container” error?

I'm running Juju in the Windows 7 OS. When running juju bootstrap, the following error occurred: C:\Users\t00106584>juju bootstrap error: failed to list contents of container: ...
1
vote
1answer
58 views

How do I find the credentials for PostgreSQL deployed via a charm?

I have deployed the postgresql charm (the recommended one) and tweaked its configuration but now I would like to know the parameters to connect to it like username, password... in the readme there is ...
1
vote
2answers
1k views

juju credential error masage

Please check your credentials or use 'juju bootstrap' to create a new environment. Error details: no reachable servers. Error: Unable to connect to environment "maas". Please check your credentials ...