a device that one can use to feed data into the PC; eg a mouse, keyboard, scanner, IR receiver

learn more… | top users | synonyms

0
votes
1answer
112 views
+50

Apply LADSPA plugin to input (microphone)

Similar to How can I apply a LADSPA plugin to a PulseAudio stream?, but I'm trying to apply the plugins to my source, not a sink. Basically, I want other people to hear my voice with plugins applied ...
1
vote
1answer
1k views

Touchpad doesn't work on Fujitsu Lifebook UH552

Recently I bought the laptop with pre-installed Win8 and tried to insall Ubuntu 13.04 beside it. I have to say, that the installation was fine, but then some strange things began to happen: first ...
0
votes
2answers
2k views

USB devices not work after installation of ubuntu 14.04

I installed lubuntu14.04 with usb mouse /kb and usb key with no problem. After installation, Ive no mouse , no keyb, no access to USB key, no network. I plug a PS2 keyb for first diagnostic. lsusb ...
2
votes
2answers
254 views

No user input after upgrading to ubuntu 14.10 with linux kernel 3.16

After upgrading from Ubuntu 14.04 to 14.10, I am no longer able to use my keyboard and mouse to do anything. I can't even get to a tty terminal. All I can do is stare at the login screen, or do a hard ...
0
votes
1answer
56 views

Are there any wired (gaming) controllers that “just work” or natively support Linux/Ubuntu?

Pretty much as the title suggests, are there any wired (gaming) controllers that "just work" or natively support Ubuntu "out-of-the-box"? Having spent plenty of time fighting (ongoing) battles with ...
0
votes
1answer
121 views

My trackpad stopped working (not detected) after update, how do I fix this?

I updated my laptop (Dell 'XPS 13 Developer Edition', aka 'Sputnik', the one that comes preinstalled with Ubuntu) to 14.10. Upon reboot my trackpad didn't work. Keyboard, touchscreen and everything ...
0
votes
0answers
12 views

Touchpad and wireless network connection

Sir i have purchased a laptop Dell Inspiron 14 3000 series. and install ubuntu 12.04 on it. After installation the Touchpad input device is not working. I have tried to connect to wireless network of ...
4
votes
1answer
449 views

How to install Wacom Intous 4 driver?

I did a lot of searches on Google in how to install Intous 4 driver, but I couldn't find anything that worked until now. I am looking for step by step installation tutorial to install the driver. ...
1
vote
0answers
32 views

Remap buttons on secondary device

I've seen a number of discussions that are similar to this issue but I haven't yet been able to get this working. I recently broke my left pinky finger pretty badly. I got the Fragpedal Quad and am ...
2
votes
2answers
4k views

Getting Wacom Bamboo Pen + Touch pressure sensitivy in GIMP

I've installed my Wacom Bamboo Pen + Touch (CTH-460) in Ubuntu (at least on one system, not another) and the pen works well for controlling the mouse cursor. However, I can't get pressure sensitivity ...
0
votes
0answers
78 views

Mouse cursor freeze: can get it to move with the mouse but keyboard keys work!

It's already 4 times that my mouse cursor has frozen today in about 7 hours of use! The last two freeze were at 2hr 25min interval, the last 3 being in the same session. It's a new ps/2 optical mouse, ...
0
votes
0answers
16 views

sound input device configuration

I have a microphone plug to the computer and go to sound input setting, there are analog, build in and microphone 1, microphone 2 devices on the sound input device, but I do not see input level moving ...
0
votes
1answer
17 views

How to know where in /dev/ is a USB keyboard loaded?

To be precise, when you plug in a USB storage device, it is loaded in sd something, but where is a usb keyboard loaded in /dev/?
0
votes
1answer
65 views

Operate Genius ColorPage-Vivied 1200xe on Ubuntu14.04 LTS

I can not install the scanner Genius ColorPage-Vivied 1200XE on Ubuntu 14.04LTS, the scanner utilities can not recognize the device
0
votes
0answers
74 views

Can't listen input device (external soundcard)

I have an Xbox 360 plugged to my laptop through an external USB sound card. I can see the sound card in my input devices and even the sound meter moves indicating sound activity, but I can't hear ...
0
votes
1answer
32 views

Disable mouse wheel doubleclick

My mouse's wheel sometimes doubleclicks instead of single click. Looks like hardware issue. How can I prevent sending another wheel click for one second for example?
14
votes
4answers
12k views

What is the best way to configure a Thinkpad's TrackPoint?

The previously useful ThinkWiki pages appear quite outdated. I am trying to permanently change my TrackPoint sensitivity and speed settings and enable middle mouse button scrolling. I have tried ...
1
vote
2answers
95 views

How can I identify which device/keycode is being used?

I am trying to reassign the functions on the buttons of my Logitech G700 mouse. Using xinput --list, I see that this counts as two devices (four if you include the wired/wireless differences). 48 ...
0
votes
1answer
30 views

Audio input prompt not updated

I am currently running 14.04 on a dell xps 13. I have installed some of the drivers from the driver support pack. However, these drivers were created for 12.04. The problem I am getting is that the ...
4
votes
1answer
235 views

Where I can find a summary of Ubuntu's current functionality on touch screen devices?

Is there an Ubuntu site where I can find a summary of Ubuntu's current functionality on touch screen devices? And, hopefully, a list of touch screen devices still in production that it will run on?
3
votes
0answers
107 views

How to remap keys on one keyboard only?

I know I can use xinput to remap mouse buttons only on one mouse but leave others unchanged. This is very useful - in my case, I use it two connect to mice to my desktop, one right-handed and the ...
1
vote
1answer
556 views

QinHeng CH345 USB MIDI device not showing up in lsusb

I have a USB MIDI cable which shows up on connect in the kernel messages as: usb 1-1.2: new full-speed USB device number 12 using dwc_otg yet, somehow in lsusb this device does not show up: Bus ...
15
votes
2answers
670 views

Is there a gui application for managing multiple mice/keyboards?

I remember a few years ago seeing an application for Fedora that allowed you to manage multiple mice or keyboards as separate input devices (based on multipointerx technology). With this application ...
0
votes
0answers
437 views

Is the out-of-the-box Ubuntu 14.04 Wacom Tablet Application Complete?

Specs: I have recently installed Ubuntu 14.04 on my lenovo yoga 2 pro and have just purchased a wacom intuos pro (medium) so that I can work my art digitally rather than on canvas. Before even ...
9
votes
4answers
5k views

mouse sometimes doubleclicks when i click once

I have a problem which is becoming a nightmare, to the extent that I am thinking that it might be easier to just scrap Ubuntu completely and try something else. I have an HP PC running Ubuntu 12.04. ...
1
vote
0answers
110 views

Get keyboard input without requiring root and without x11

I'm trying to capture keyboard input in a C/C++ program without requiring root privileges and without the use of X11 XNextEvent(). I've tried to open the device directly, but for obvious security ...
1
vote
0answers
526 views

How do I get Wacom Tablet drivers to initiate with new Intuos Pro series?

Just as the question says. This issue happens under Ubuntu 13.x (and also Linux Mint). When Wacom decided to re-release their Wacom Intuos Pro series, the current linux-wacom drivers were no good, so ...
1
vote
0answers
111 views

Get keyboard scancodes in Ubuntu 13.10

I'm trying to find out the scancodes for a set of foot pedals so that I can rebind them to more useful keys. In older versions of Ubuntu I was able to do this using /lib/udev/keymap as discussed here, ...
7
votes
1answer
1k views

How can I set different sensitivities for two mice at the same time?

I often use a USB mouse and my laptop's pointing stick at the same time. I can adjust the sensitivity in Mouse Preferences, but the sensitivities of the two mice are so different that I cannot find a ...
3
votes
2answers
1k views

How to configure Logitech Marble trackball

You can configure it using xinput. I tested this in 11.10 and it works very nicely. This selection is from "Ubuntuwiki" Avoid using Hal for this release because it has known issues. Put the ...
0
votes
1answer
210 views

'unable to open uinput' when using wminput with or without sudo

I'm trying to get a wii classic controller paired to my chromebook running Chrubuntu (12.04). It works when using xwii, but although the buttons function, the analogue sticks do not. I wanted to try ...
1
vote
1answer
551 views

My ps3 controller stopped working 2 days ago

I used to use my ps3 controller to play games, and a couple of days ago it stopped working. I get this message during boot up (after BIOS): [ (some numers)] sony 0003.054c.(more numbers): can't set ...
0
votes
0answers
90 views

Ubuntu 14.04 mouse not working but detected

I have a Razer Imperator mouse that used to work just fine until yesterday. lsusb, xinput and dmesg all correctly list the mouse, but yet it doesn't work. Can anyone give some tips on how to debug ...
0
votes
0answers
22 views

digital tablet which is capable of giving input to my applet?

I have java project , which is currently developing and will be deployed in ubuntu only. Here i need a digital tablet which is having both mouse and pen, which is capable of giving input to my applet ...
1
vote
0answers
52 views

writing to an USB optical mouse

On the internet I find a lot of examples of people reading from the /dev/input/mouseX device the dX, dY and status byte from an USB optical mouse. From some research I found out that such an USB ...
0
votes
0answers
27 views

Have to restart lightdm to get working window response

Every time I boot my computer, I need to restart lightdm to have anything but the desktop respond to mouse click events. It works fine after this. I just installed Ubuntu 14.04 on a custom-built AMD ...
6
votes
4answers
2k views

Where do I have to paste an “xinput” command so that it executes it when GNOME is started?

On my Thinkpad I need to execute something like this in the terminal: xinput set-int-prop "TPPS/2 IBM TrackPoint" "Evdev Middle Button Emulation" 8 1 so that my the 2 buttons on my touchpad emulate ...
1
vote
0answers
42 views

Key presses not registering unless I type very slowly

Asus K55N laptop Ubuntu 13.04 Kernel: 3.8.0-30-generic It took a long while to type this. I purged and reinstalled apport yesterday because it had been crashing. I am not sure if that's related but ...
2
votes
1answer
46 views

What happened to my midi device files?

I've been working on a personal project which involves parsing a binary stream of midi data from a controller. The way I had been doing it was reading from /dev/dmmidi1. Over the weekend I upgraded ...
0
votes
0answers
15 views

I plug in my headphones, and Ubuntu decides I've got my LMB held

For about a week, often when I locked the computer, I'd return to find that my left mouse button was not recognized. I had a graphical tablet, a mouse, and a touchpad, and I couldn't click. ...
0
votes
1answer
192 views

Why does bluetooth connect but not transmit any audio?

It connects, but then I don't get any audio in Pulse Audio or in Steam's mic settings. I don't understand why this is so hard. I can get it to work on my PS3 or mac with no trouble. I have a ...
6
votes
1answer
2k views

how to configure a trackpoint only mode on thinkpads with clickpads

I own a Thinkpad carbon X1 gen2 notebook with the new touchpad (clickpad). The same clickpad seems to be used in the T440 and W540 models as well. I would like to turn off the touchpad but still be ...
1
vote
0answers
53 views

After upgrade I cannot type in any windows

I run Ubuntu 13.10 on a 64 bits machine. Last Friday I had an automatic update. After that I cannot type in any window, terminal, Gedit, Firefox... but I can navigate my files in File Explorer using ...
0
votes
0answers
96 views

Temporary keyboard layout switch in Ubuntu 13.10 (give my right Alt back!) [duplicate]

In Ubuntu 13.10: is there a way to temporarily switch the keyboard layout? Use case: While I am typing text in Russian and need to input # sign (or maybe a little word in English: "cat" or ...
1
vote
1answer
146 views

Is there a way to activate Network Tablet on Ubuntu?

I have the android app called GfxTablet and I only have one program (GIMP) that the app can give input on GIMP. Based on the site [1], it says that can work with any Linux program on the computer. ...
7
votes
3answers
10k views

Configure udev to change permissions on USB HID device?

I have a USB scale, a USB HID. Currently, when it is plugged in, the permissions only allow the superuser to access it. How can I configure udev to let anybody access this device? I have the vendor ...
3
votes
1answer
1k views

ps3 bluetooth remote connected as linux input device has only one event type on 13.10

I'm trying to setup my Harmony Smart Control as a PS3 Bluetooth Remote Control (it pretends to be this remote) under Ubuntu 13.10 (latest kernel and updates installed). My bluetooth dongle wouldn't ...
1
vote
1answer
1k views

Wacom Bamboo CTH-300 issues

I am running Ubuntu 13.10 and am having issues with my Wacom Bamboo model CTH-300. The built in GUI to configure Wacom input devices doesn't recognize my Bamboo tablet at all. When I issue - dmesg | ...
0
votes
1answer
26 views

What's the mounted path for sound device?

As the title? In red hat sound device is mounted at /dev/dsp. How about ubuntu? Regards, Hua Jie
0
votes
1answer
143 views

How to make resume script wait for ivtv initialization

I have a TV tuner card with an infrared sensor. I have made a script to remove/start ivtv kernel module and shutdown/restart lirc service on suspend/resume. The problem is that the lirc service start ...