Use of a graphics tablet or digitizer, to trace shapes or capture hand-drawn images, as an input device with Ubuntu.
7
votes
6answers
8k views
Does the Wacom Bamboo Pen & Touch work out of the box?
Is there any tweaking involved in Ubuntu 10.10 to make the Wacom Bamboo Pen & Touch work? And is this hardware getting some love from the new multitouch framework?
If there's no multitouch ...
7
votes
2answers
5k views
How to install Wacom Bamboo Pen
I have a new Wacom Bamboo Pen. I'm using Ubuntu 10.10 64bit.
After googling a little bit, I checked that xserver-xorg-input-wacom was installed. I plugged in my tablet. I rebooted my computer. ...
6
votes
3answers
4k views
How do I install a Wacom Bamboo Fun?
I own a Wacom Bamboo Fun CTH-661 and would like to know how I make it work on Ubuntu 10.10. I am a Linux newbie trying to migrate from Windows, so it would be wonderful to have a step-by-step answer.
...
5
votes
1answer
460 views
Strange behaviour with Gimp and Wacom
When I enable the wacom tablet in the Gimp extended input devices (setting it to 'screen'), to use the pressure sensitivity, it starts to behave strangely. I cannot pick guides from the rulers and the ...
5
votes
1answer
995 views
How do I install my Wacom Intuos 2 serial tablet?
I've seen many topics on the subjects but they are too complicated for me. I'm not confident in compiling stuff.
Is there some headache-free way to make it work under Ubuntu?
Where do I start?
Edit :
...
4
votes
3answers
5k views
How do you turn off touch on a Wacom Bamboo CTH-470?
I bought my girlfriend a Wacom Bamboo CTH-470 recently and it is running well after installing wacom-dkms. I have now run into a wall that I don't know how to get around. The touch on the tablet will ...
4
votes
1answer
703 views
Wacom Intuos 3 with Inkscape 0.47
How do you set up Inkscape 0.47 to work with Wacom Intuos 3?
In particular, I'd like to get pressure-sensitivity to work on Inkscape. I have "Use pressure-sensitive tablet" checked under the Inkscape ...
4
votes
1answer
530 views
How to switch orientations of a bamboo tablet?
I have a Bamboo Pen Tablet and I use Ubuntu 11.04, and I just want to ask, how can I switch my tablet orientations.
4
votes
1answer
517 views
how do I get the Hanvon graphic tablet driver?
I have a Hanvon Graphic Tablet, and guides are suggesting I should compile the driver.
I have never had to compile a program before. A link to the driver is in this Ubuntu Forums post.
I love Ubuntu ...
4
votes
1answer
354 views
How do I make my intous 4 wacom affect only one Monitor?
I have two monitors and I want my wacom to only work on one monitor.
4
votes
1answer
353 views
How to install Wacom Intous 4 driver?
I did a lot of searches on Google in how to install Intous 4 driver, but I couldn't find anything that worked until now.
I am looking for step by step installation tutorial to install the driver.
...
3
votes
1answer
776 views
Are drawing tablets supported in Ubuntu
I was wondering if digital drawing boards (Handwriting Tablets, Pen Tablets, Drawing Tablets, Graphics Tablets) are supported in Ubuntu for presentations, pointing devices and normal drawing. For ...
3
votes
1answer
9k views
How to set pressure sensitivity in GIMP to control line thickness?
My sister is moving from Windows and I just got her a new graphics tablet. However, the pressure sensitivity controls opacity rather than line thickness; she really needs this feature from ...
3
votes
3answers
3k views
Disable touch on Bamboo Touch&Pen CTH-460
Running Ubuntu 11.04.
Got a bamboo Touch&Pen CTH-460 and it works out of the box. The pen response works great but the finger response is horrible.
Is there a way to disable the finger response ...
3
votes
1answer
3k views
Wacom bamboo capture CTH470L pen and touch doesn't work
i bought a wacom bamboo capture, it lights up, and shows in lsusb but it isn't working, i read some topics here but don't get any luck :/
ps: sorry about my english i'm brazilian.
3
votes
2answers
578 views
Cursor 's stuck on the right side of the screen when using Wacom tablet
I am using Ubuntu 11.10 x64. When I move the cursor off the screen on the right side of the screen using my pen-tablet (as mouse), there is no way to move it back again. The only way is to a mouse ...
3
votes
1answer
1k views
How to configure wacom devices manually
In ubuntu 11.10 with xorg-1:7.6+7ubuntu7 and xserver-xorg-input-wacom 1:0.11.0-0ubuntu2
I've put in xorg.conf:
Section "InputDevice"
Driver "wacom"
Identifier "pen" # ...
2
votes
1answer
3k views
How can I configure the buttons of my wacom tablet?
I have a wacom bamboo tablet (MTE-450A). It works out of the box on 11.10, even the scrolling function works (it used not to). Unfortunately the four buttons are assinged to things I don't know. How ...
2
votes
2answers
1k views
Is there any way to get pressure sensitivity from my Wacom-drawing Tablet into a Web-browser? [closed]
Wacom works pretty much out of the box in Ubuntu(Studio), but pressure sensitivity only works in specific applications, like Gimp.
DeviantArt now has released an online-application, called Muro, ...
2
votes
1answer
273 views
Hanvon / Hanwang Graphics Tablet not recognised
I'm totally lost.
I've just built a new system and installed Ubuntu 12.04. It's my first time with Linux and getting into the terminal / command line for the first time since IBMDOS 5 and Windows ...
2
votes
1answer
801 views
How t get Pressure sensitivity work on a Wacom bamboo pen ctl-460?
My tablet works fine except for the fact that I don't have any pressure sensitivity.
Any idea on how to fix this?
Edit: I have the same problem, but I can add that pressure sensitivity used to work ...
2
votes
1answer
624 views
Installing a Wacom Bamboo One Pen (CTE-460)
I've been looking around and following guides to get it working, but haven't gotten anything that works.
Here's some information:
lsusb:
Bus 003 Device 003: ID 056a:006a Wacom Co., Ltd
dmesg | ...
2
votes
1answer
644 views
How can I configure the Aiptek T-6000U graphics tablet?
I followed AiptekTablet instructions on the Ubuntu Wiki to configure 11.04 for use with my graphics tablet.
I installed the xserver-xorg-input-aiptek package and created two files with the options ...
2
votes
1answer
671 views
Application for fullscreen note taking with Wacom tablet
I have a Wacom tablet and a netbook, I would like to use both as a paper replacement for taking notes. Is there some note taking application that runs in full screen and lets you save the ...
2
votes
1answer
491 views
Wacom Bamboo CTH460L issues
I recently bought a Wacom Bamboo Pen & Touch CTH460L. I installed doctormo's PPA, however, the pen functionality didn't work and the touch was very glitchy (when I touched it, it immediately ...
2
votes
1answer
589 views
I can't get click and drag to work with my Wacom Bamboo P&T
I get my Wacom Bamboo Pen & Touch apparently working (By using Martin Owens' PPA), but whenever I try to click and drag something -- for example to move a window -- it will only register as a ...
2
votes
0answers
217 views
Wacom Bamboo Pen & Touch CTH-470 3+ finger gestures
I love my CTH-470 and I'm glad it's without having to spend hours in the terminal to get it working since I believe 12.10 (which I'm running now). But in the manual it states that you can swipe with ...
1
vote
2answers
869 views
How do I get the wacom zoom wheel working?
I'm trying to get the zoom wheel on my wacom bamboo to work. Though i have very little idea of how to do so. I tried using xinputwacom (i think) however it moaned it was missing something. Is there ...
1
vote
1answer
322 views
Xsetwacom Top and Bottom values for Wacom Bamboo Fun 6X8?
Does anybody know what are the Wacom Bamboo Fun CTH-661 correct values for BottomX/BottomY and TopX/TopY? I got the tablet to work under 10.10, but when I move the cursor over the edges of the screen, ...
1
vote
1answer
520 views
Cannot assign keys to Wacom scroll wheel anymore
my Wacom Graphire 4 used to work perfectly well until, I think, Ubuntu 10.4. At that point something changed in the configuration and I couldn't assign a key to the scroll wheel anymore (note: the ...
1
vote
1answer
1k views
How to get a Wacom Bamboo tablet working properly in an Ubuntu VM on a Mac?
I'm using Parallels for Mac and VMware Fusion (on a Mac, obviously), and I'm using Ubuntu 12.04 as a guest OS. The tablet I'm using is a Wacom Bamboo Pen & Touch (CTH-460) and it's my only mouse ...
1
vote
1answer
360 views
How do I get a DigiPro Wp8060 tablet working?
I am hoping to find some assistance with installing my DigiPro WP806 Tablet with Ubuntu 10.10 if anyone is available to help
I have done some research myself, but the documentation I've come accross ...
1
vote
1answer
1k views
Issue with Wacom Bamboo Fun Pen & Touch
I'm running 11.10 and I've bought a Wacom Bamboo Fun Pen & Touch Tablet. I'm very happy with the Pen on Ubuntu, it's very responsive and works well for clicking and dragging etc.
The issue that ...
1
vote
1answer
555 views
Wacom Bamboo CTH-461 in Ubuntu 11.04
I've got a Wacom Bamboo CTH-461 and Ubuntu 11.04. I know, it should work, but it doesn't. In elementary OS it works, but here ... anyone know why? I need it :/
1
vote
0answers
120 views
How do I set-up buttons and keys on my Wacom Tablet and Stylus in Gimp?
I am running Ubuntu 12.10 Quantal, Studio, 64 bit version. I do my photo editing in Gimp 2.8.4 When, in Gimp, I go to Edit, Preferences, Input Devices, Configure Extended Input Devices, I see for the ...
1
vote
0answers
122 views
Does “generic” tablet drivers exist?
I recently installed ubuntu 12.10 and it's awesome except that there does not seem to be any support for my drawing tablet.
This is what I got:
...
1
vote
0answers
103 views
Use of another graphic tablet, other than Wacom?
I do not have a wacom tablet. Instead, I have an iBall tablet, which contains installations only for XP and Mac OSX.
IS there any way, I can use it for Ubuntu 12.04 LTS ?
Thanks.
1
vote
0answers
106 views
Digi Pro Pen Tablet 640 Drivers
I have a Digi Pro Pen Tablet 640. I used to use it with windows. But my windows sucked so I switched to Ubuntu. Is there a way to install the drivers into Ubuntu? There is no Ubuntu drivers provided ...
1
vote
0answers
102 views
12.04 Wacom Volito tablet pressed without touching tablet surface
My tablet has worked okay in the past with older Ubuntu versions, and I think even with 12.04 a while back. Perhaps something has changed with the driver.
Anyway my problem is the same as listed in ...
1
vote
1answer
2k views
Configuring Wacom Tablet buttons and options
I have a new Wacom Intuos5 Touch Medium. Surprisingly enough, it worked out of the box when I connected it to my computer (Ubuntu 12.04 32-bit), including the pen pressure and some touch pad features. ...
1
vote
1answer
67 views
Wacom Graphics table shown but is not installed
On both my previous computer and this new one, "Wacom Graphics Tablet" appeared in my Hardware list.
I don't have this, never did. The common (reused) hardware is:
- Samsung CLP300 printer
- Altec ...
1
vote
0answers
144 views
How do I get my Bamboo Capture tablet working? [duplicate]
Possible Duplicate:
Wacom Bamboo Capture CTH-470 Pen and Touch not working
As far as I know, only the first generation Wacom Bamboos work out of the box. But I use a third generation one (a ...
1
vote
0answers
276 views
`xsetwacom --list dev` is empty (using doctormo's wacom PPA) and cursor position doesn't update [closed]
xsetwacom --list dev is empty on Ubuntu 10.04 64-bit with doctormo's wacom-plus PPA.
The device otherwise appears to work fine and I can find the devices via brute force:
for i in {1..50}; do sudo ...
1
vote
1answer
766 views
Installed Wacom Bamboo Pen + Touch drivers, but no dice
I'm trying to install my new Wacom Bamboo Pen + Touch tablet in Ubuntu 10.10. As described here, among other places, I've installed the Wacom dkms package by doctormo and rebooted my PC, but the ...
0
votes
0answers
122 views
How can I fix Wacon Graphire 4 stylus sensitivity issues?
I have a Wacom Graphire 4 tablet and I'm experiencing the following problem; when I lift the stylus from the tablet, it seems to think that there is still pressure applied. I can keep the stylus off ...
0
votes
0answers
179 views
12.04 tablet cursor jumps around when clicking
After updating to 12.04, I had to re-install wizardpen-driver ( https://help.ubuntu.com/community/TabletSetupWizardpen ) to use my Trust tablet.
But now when I change the Coordinate Transformation ...
0
votes
1answer
415 views
GIMP extended input devices settings problem
I have a Trust graphics tablet. Today I realized how to make GIMP use the tablet's sensitivity features: by going to Edit > Preferences > Input Devices > Configure Extended Input Devices, and there ...
0
votes
1answer
635 views
Wacom Bamboo Splash (CTL471) on 12.04
I recently bought a Wacom Bamboo Splash, and I can't get it to work on 12.04. The output of lsusb is as follows:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID ...
0
votes
1answer
473 views
How do i install my bamboo tablet? [closed]
Someone please help me find the easiest way to install my bamboo tablet. I need an easy way to do it and someone to teach me and give me an exact step by step process to install it. I have an acer ...
