0
votes
0answers
25 views

How to make my wi-fi usb adapter sitecom wla 2100 n300 v1-001 to work

I have installed ubuntu 12.04 lts on a laptop (32bit) and on a desktop (64bit) and on both my sitecom wifi usb adapter is not recognized by ubuntu. I dont have any experience with ubuntu or linux. On ...
-1
votes
0answers
21 views

modprobe foo_driver not found

i need to change my usb device product ID to make it work properly without recompiling kernel.. Using 13.10. But the command 'modprobe foo_driver' gives me 'FATAL: Module foo_driver not found.' What's ...
0
votes
2answers
21 views

Where is the information stored in the USB core regarding the class driver and the HCDs, for it to check?

Obvious by the question, does the USB core have an array or something (maybe a linked list) where all the class drivers' information and HCD's information (a name or some kinda number) is stored so ...
0
votes
1answer
21 views

What happens after the core selects mass-storage

When a usb mass-storage device is attached to the host, enumeration of the device happens and the process where an address is given to the device, getting the descriptors occurs, then the core checks ...
0
votes
0answers
10 views

Not able to see pr_info output

I have added some pr_info statements in some source code files like driver/usb/core/generic.c , message.c , usb.c , hub.c , driver.c. When I run make modules;make modules_install;make install I am ...
0
votes
1answer
103 views
+50

How to install Trust SC-5500p USB 5.1 external sound card?

(I use Ubuntu 14.04 64bit and the sound card is not broken as it works fine on Windows) According to most of the reports online installing SC-5500p on Ubuntu seemed to be a cinch for most of the ...
0
votes
0answers
9 views

How does the host assigns driver to a USB device?

Where does the enumeration happen? In /usb/core/hub.c ? After the enumeration occurs (the host detects and identify the USB device), how does the host loads the respective driver. Is it by using the ...
0
votes
0answers
99 views

Does A Realtek RTL8191SU WLAN USB driver need to be patched to allow Monitor mode for reaver and aircrack-ng?

Hello Ask Ubuntu users. I'm having trouble configuring my Realtek RTL8191SU WLAN USB device to be able to use monitor mode. Do I need to patch my RTL8191SU WLAN USB driver to allow monitor mode? If ...
0
votes
1answer
62 views

Wireless driver on cd not working for ubuntu distribution, but in windows it works fine

I have a USB wireless dongle, which is not detected by ubuntu. The drivers that come with the dongle are useless in linux and have major issues with installation. I have tried to install NDISWRAPPER, ...
0
votes
1answer
35 views

Creating/Editing the mouse driver [closed]

I am doing a project in the field of embedded systems and the project that i am working on is about making a new HUMAN INTERFERENCE DEVICE(HID) which will be connected thorough usb port. The working ...
0
votes
1answer
85 views

Trouble with getting edimax ew-7811un drivers installed on older dell desktop

I am a complete newbie to Ubuntu and was expecting just to have a plug and play wireless usb adapter so I can surf the web but I was wrong. I do not know where to start and I hope someone can help get ...
0
votes
1answer
774 views

How to decide which drivers for Ralink 148f:7601?

I have just got my new usb wifi dongle and I am trying to get it running on 13.10. lsusb gives me the following: $ lsusb -v Bus 002 Device 005: ID 148f:7601 Ralink Technology, Corp. ...
0
votes
0answers
239 views

Does the Epson Perfection V600 Photo Scanner or V550 Work with SANE

Before buying either the Epson Perfection V600 Photo Scanner or the Epson Perfection V550, I would like to confirm from a person who has used either of these scanners under Linux that they work with ...
0
votes
0answers
114 views

Unable to install Ubuntu 13.10 on “gigabyte ga-990fxa-ud3 rev 4.0”

I am not able to install Ubuntu 13.10 on gigabyte ga-990fxa-ud3 rev 4.0. The motherboard hasn't got a built-in video card. The video card is R9-280x. The Ubuntu starts loading the files, but a second ...
1
vote
0answers
36 views

Fresh ubuntu install leaves connected network not working and only 2 usable usb ports [closed]

When I first did the fresh Ubuntu install I noticed that only two of my USB ports on the back of my rig that line up with the Ethernet port work, but no other USB port throughout the computer works ...
1
vote
1answer
118 views

How to make it wokr dvb-t usb a867 on kernel 3.13.3

I have kernel 3.13.3 and dvb-t usb tuner a867 based on chip af9035. What can I do to make this tuner work on kernel 3.13.3?
0
votes
0answers
10 views

Can't play sound (Teufel Concept C)

I want to use my speakers but ubuntu does not recognize my Teufel Concept C properly. What do I have to do in order to get it running? I've read that using sound modules might help but since I'm a ...
0
votes
1answer
28 views

Unable to use Tenda USB Antenna

So, guys. I just bought recently an antenna from Tenda. When I plug it in, the Ubuntu seems to conflict between two drivers. Here are two driver that Ubuntu listed: Intel PRO/Wireless 3945ABG ...
0
votes
0answers
228 views

PCIE USB 3.0 Controller not working

I am running Ubuntu 13.10 and just got a Sharkoon USB 3.0 PCI-E x1 Controller but can't get it to work. I tried lspci -v and can see the controller. What now? $ lspci -v 02:00.0 USB controller: ...
0
votes
0answers
43 views

WiFi and Network menu problems in 13.10

I have wireless usb adapter works on windows 7 now network menu not responding and I'm not sure how to install drivers how can I recover the network menu to working condition in Ubuntu 13.10 the usb ...
0
votes
0answers
21 views

Multimedia keyboard recognition delayed

Several years ago ich changed my original (Fujitsu-Siemens) keyboard for a nice thing called Colorsit KB 8110. For I changed every hardware but the DVD-burner and a multicard-reader, including ...
0
votes
0answers
58 views

unsupported graphic for installation on Toshiba U50D

I have a Toshiba satellite U50D laptop (A6-5200 with Radeon 8400 graphic). When I try to install Ubuntu (12.04 LTS or 13.10) via USB, it goes to the text mode and not into the graphic mode for ...
0
votes
0answers
42 views

USB ups driver determination

Hy, i have POWERBANK ELECTRONIC UPS model: NV-1000 USB http://powerbank.com.tw/products.php?cat=64&lang=en It comes with RedHat driver UPSmart-S-1.1-Aug07.02.i386.rpm but no Ubuntu/Debian ...
0
votes
0answers
554 views

Install correct drivers for Asus USB-AC53 WIFI Adapter

Not sure how to get it working. Anyhelp would be appreciated.
0
votes
2answers
86 views

A wireless USB receiver that works out of the box on Ubuntu

I have a desktop computer with no wired internet access; however, I do have access to a wireless connection. I am running Ubunt 13.10. I do not have a builtin wireless on this desktop, so I am ...
0
votes
0answers
80 views

Egistec ES603 fprin_demo Shows No Device found

On ubuntu 12.04 LTS amd64 I have used the following commands to get fprint_demo. sudo apt-get install libfprint0 fprint-demo libpam-fprint gksu-polkit wget ...
0
votes
2answers
1k views

Trouble finding ubuntu compatable usb wifi adapters [closed]

I've read the forums, I looked at that page that everyone posts on. I don't mean to sound like a douche but can you guys just seriously help a noob out and recommend a USB wifi device that works in ...
0
votes
0answers
65 views

USB device driver - Calling device_Write function from kthread

I'm writing a simple USB driver to drive a stepper motor based on USB Skeleton 2.2 Driver, kernel 3.8. The basic version is running properly. As a advancement, I introduced KTHREAD to call the ...
0
votes
0answers
51 views

Drivers for DVB-C dongle by eMPIA Technology Inc.

I just bought a USB DVB-C dongle for which lsusb command returns eb1a:8179 eMPIA Technology, Inc. Has anybody ever come by such a device? I need to install proper drivers. By the way, the vendor of ...
0
votes
0answers
79 views

Ubuntu 13.10 - how to apply kernel patch?

In Ubuntu how can i change this modifications safely? One manufacturer given me the PATCH to apply. "faulty USB2 cameras on USB3 Linux systems. patch" --- linux/drivers/usb/core/hub.c.orig ...
0
votes
0answers
65 views

My D-Link Easy Wireless Adapter N150 is not longer recognised by my Ubuntu

I use Ubuntu 13.10, and I´ve bought recently a D-Link N150. When I installed ubuntu for first time, the device worked fine, and my computer showed me all the WiFi networks avaliable arround. However, ...
0
votes
0answers
99 views

Edimax EW-7822UAC not operating at SuperSpeed

I was able to successfully build and install the drivers from https://github.com/abperiasamy/rtl8812AU_8821AU_linux for this device. The problem is that while the device supports USB 3.0 SuperSpeed, I ...
0
votes
1answer
1k views

connect my galaxy s duos phone as mass storage or drivers [duplicate]

i want the drivers of my phone to be installed in Ubuntu 12.04 Lts please help me on this
1
vote
2answers
513 views

Epson Scanner sx218 - Works Intermittently

My Epson SX218 does not seem to be reliably recognised. I have installed the correct drivers from the Epson website. I have edited the /etc/sane.d/dll.conf file to contain the uncommented line - ...
0
votes
0answers
66 views

How to mount a device in ttyUSB0?

I'm trying to mount a USB internet dongle (data card). The output of dmesg is: [20200.396232] option 2-1.2:1.1: GSM modem (1-port) converter detected [20200.396448] usb 2-1.2: GSM modem (1-port) ...
1
vote
2answers
793 views

USB 3.0 Asix AX88179 not working on Ubuntu 13.10

I upgraded from 13.04 to 13.10 and I had the AX88179 driver installed from the PPA. When I upgraded the USB 3.0 to Ethernet converter stopped working although it should be included in the kernel ...
0
votes
0answers
87 views

How do I connect my 'LG KM900 Arena' phone to Ubuntu?

How do I connect my 'LG KM900 Arena' phone to Ubuntu as a mass storage device? When I connect the phone, I select mass-storage on the phone's interface, and Ubuntu recognizes the connection as '7.5GB ...
1
vote
0answers
205 views

ZC0301 webcam Driver problem with Ubuntu distributions after 11.10

I'm having problem with Webcam and fed up with this search in Google for answers. So I've connected webcam to my computer having Ubuntu 13.10, and i tried to run luvcview program to simply see the ...
0
votes
0answers
474 views

DisplayLink Usb vga adapter being loaded as audio device

I'm new to the world of Linux, please try to bare with me. If I'm using commands wrong or misunderstand, a shove in the right direction would be greatly appreciated. I'm attempting to make the switch ...
1
vote
3answers
2k views

How do I get a USB Wi-fi D-link DWA-125 rev D1 rtl8188etv working?

guys. DWA-125 rev.D1, RTL8188ETV. Ubuntu 12.04 LTS. lsusb, iwconfig, ifconfig, ip addr, lshw -C network: root@gugenot-MS-7597:~# lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub ...
1
vote
1answer
1k views

Errors with USB device during boot?

Explanation I just built a new computer. Here are the specs: Motherboard: Gigabyte 990FXA-UD3 CPU: AMD FX 8350 SSD: SAMSUNG 840 Pro Series MZ-7PD256BW RAM: G.SKILL F3-1600C9Q-32GXM Initially I ...
0
votes
1answer
464 views

Epson Stylus SX235W with Ubuntu 12.04 - Scanner not recognised

I'm setting up a new computer running Ubuntu 12.04 and am having trouble getting the scanner on my Epson Stylus SX235W All-in-one to be recognised. I would like to be able to use the 'Image Scan! For ...
-1
votes
1answer
317 views

TPLINK WN8200ND usb wifi not working

i have an ubuntu version in a desktop pc, and i have an usb wifi adaptador brand TP-LINK WN8200ND with a chipset brand REALTEK rtl8192cu, and i can't make it work. I've tried everything, ndiswrapper, ...
0
votes
1answer
562 views

Ubuntu 13.04 Wifi not discovered

I first started using Ubuntu at v13.04 last monday straight onto my new computer, it has only seen Ubuntu. When i bought the desktop i also purchased a D-Link DWA-123 Model USB wifi adapter. It was ...
0
votes
0answers
53 views

Wireless not working when running 12.04 from USB

I'm trying to see if Ubuntu will work for me on my old laptop. I created a bootable USB drive for 12.04 I haven't done the proper installation yet. I selected the "try Ubuntu" option and run it off of ...
2
votes
0answers
233 views

Fujitsu S1300i advances document but doesn't scan

I'm using a Fujitsu ScanSnap S1300i. sudo sane-find-scanner (using sudo as a temporary workaround to minimise any permissions problems) returns: found USB scanner (vendor=0x04c5 [FUJITSU], ...
0
votes
0answers
123 views

Having issue with Foxconn/Beecems PXU1900 from Clear Wireless

I have an Asus USB N53 wifi adapter Ubuntu recognizes this just fine, and can access internet via my apartment's wifi; however, I have a connection with Clear Wireless that works in Windows(and is ...
0
votes
0answers
488 views

ra0 No scan results with Ralink usb wireless device: usb device do not scan for wifi

Hi I'm new to ask ubuntu. Sorry for any format mistakes I would have made. So as specified in title, I have just brought a usb wireless device WLI-UC-G3000HP-V1 from BUFFALO INC., and I have install ...
2
votes
0answers
693 views

USB Ports not Recognizing Devices?

I have a particularly odd problem, that I can't seem to solve. I recently just booted Ubuntu 12.04 LTS to my Desktop, the strange thing about it is, that only the USB 3.0 ports on the front recognize ...
0
votes
0answers
229 views

Help needed with Eazycap (somagic) PLEASE!

I followed this guide easycap-somagic-wiki installing both the Deb somagic-capture and the Deb somagic-capture-tools packages.I skipped both source installs and the "Downloading and building git ...