2
votes
1answer
43 views

How do I save a line in terminal without runninig it?

Is there an option to abandon the current command and later go back with the up arrow? Sometimes when I want to open multiple files at once I want to check "dir" to see if I got the right paths. How ...
0
votes
0answers
16 views

Ubuntu Gnome terminal won't start

Seems like my gnome-terminal won't start every time I press Ctrl Alt T nothing happens so as when I manually try to open it from the apps list. I tried using Alt F2 and typing xterm and running the ...
-2
votes
2answers
31 views

Which command is to take for to find out about program, which else programs are initialized by this one program? [duplicate]

Yes - this concerns the question which commands in terminal are possible, for to find out which programs are initialized (visible and non-visible) - by program1. (for example - when I only want to ...
0
votes
0answers
17 views

Sublime-Text 3 build and run in terminal

So I'm using sublime-text 3 for programming. I write PHP, Python and C++. I like that Sublime-Text is able to compile my code. But problem is that when I want to use input in C++ or Python, then ...
1
vote
2answers
45 views

gibberish command not found on bash terminal startup

I have run across an issue that I just cannot seem to figure out. When I start my terminal in ubuntu (14.04) I get the message sdfsdfsdi: command not found As you can see it just looks like ...
1
vote
0answers
39 views

What are the different types of terminals available in Ubuntu?

When I type echo $TERM on my terminal it shows me xterm. From there itself I believe there are more than one terminal in Ubuntu. Is it the name of the terminal that I am using? I have seen some ...
0
votes
0answers
44 views

sublime text 2 via gnome-Terminal GLib-CRITICAL

Whenever I run sublime text 2 from the command line (via the 'subl' shortcut command) I receive the following error (sublime_text:4679): GLib-CRITICAL **: Source ID 15745 was not found when ...
1
vote
0answers
38 views

Terminal screen will not be refreshed after suspending program: is this a bug or a default configuration problem?

Sometimes after suspending emacs(CTRL+Z) terminal screen refreshes incorrectly: Never experienced this problem in Ubuntu 12.04 (my current version is 14.04 with gnome-shell 3.6.2)
1
vote
1answer
13 views

What init files will be read when opening a new tab and a new window of gnome terminal?

If I am correct, I remember that opening a new tab in genome terminal will run .bashrc, and opening a new gnome terminal window also will. Do these two read the same init files of bash? E.g. ...
0
votes
0answers
24 views

How to make special new folder in right click? [duplicate]

I want to create folder but it's name date of current day. I know how to make it in terminal by this command: mkdir $(date -I) How to add this to right click to be easy?
5
votes
2answers
241 views

How to do: underline, bold, italic, strikethrough, color, background, and size in Gnome Terminal?

How to do: underline, bold, italic, strikethrough, and color in Gnome Terminal? Bold Italic u̲n̲d̲e̲r̲l̲i̲n̲e̲ s̶t̶r̶i̶k̶e̶ ̶i̶t̶ ̶l̶i̶k̶̶e̶ ̶i̶t̶s̶ ̶h̶o̶t Color background font < (its mono ...
-2
votes
0answers
44 views

I am getting error when open terminal

when I am opening terminal I am getting this error can you please help:- Command 'lesspipe' is available in the following places * /bin/lesspipe * /usr/bin/lesspipe The command could not be ...
0
votes
1answer
17 views

How to save newly created commands in the terminal

is there anyway to save newly created commands in the terminal? Every time, I exit the terminal, all of the commands I created are lost. Thank you.
1
vote
0answers
13 views

How Do I Change the Application Mapped to Open in Terminal? [duplicate]

I have appended Open in Terminal to my right-click context menu which by default, opens up a terminal window at the selected location. I would like to replace the default terminal window with ...
1
vote
1answer
81 views

how to run command in an already opened terminal through a shell script

I'm running a shell script.sh which is supposed to open terminal and then run some commands in this opened terminal. What happens is that the terminal starts but the following commands are not ...
0
votes
1answer
37 views

Run some shell files from another shell file in different location

I have 5 shell files in a specific locations on my ubuntu system. I have two users on this system userA which is the main user and userB. Currently I have to manually open a terminal using user userA ...
1
vote
0answers
46 views

Display running clock in terminal [duplicate]

I want to display running clock inside terminal. I have already gone through this answer but this method only works in zsh terminal. But I want to display in bash. Is there any other way to display ...
4
votes
1answer
82 views

How to automatically opening terminal windows & tabs, ssh and sudo su?

When I start my day in front of my computer, I first have to do the following: In workspace 1: Open a new terminal window, ssh loginserver, then ssh serverA1 and sudo su account00 Open a new ...
0
votes
1answer
48 views

How to have git and virtualenv aware colors in terminal?

I am watching "Building Web APIs with Flask" video on Oreilly from Miguel Grinberg. His terminal is colorful and shows different colors for virtualenv name and git branch name. I want to have the same ...
0
votes
0answers
38 views

Terminal profile doesn't list all available fonts

my GNOME Terminal profile let me choose only mono fonts and Courier. I'm trying to use Source Code Pro font on my ubuntu terminal. I've installed it successfully, in ~/.fonts, and it shows on every ...
0
votes
2answers
45 views

gnome-terminal profile without bash history

I'm trying to create a profile in gnome-terminal that doesn't store bash history. The easiest way to do that is to run export HISTIGNORE="*", but there is one problem, gome-terminal is executing ...
3
votes
3answers
64 views

Where is the output of a Terminal (Gnome Terminal) stored

First of all, this is not a question about history, which stores all the entered commands. I have on my workstation at work several open Terminals from which I launch simulations, examine the output ...
0
votes
0answers
76 views

Terminal has lost its transparency option?

I just installed a new GFX card and ended up reinstalling 14.04 but now I have no option for transparency in the terminal. The whole 'background' tab is missing in the profile options does anyone know ...
2
votes
5answers
271 views

How to get the terminal text those are overflowed during command execution?

Some commands have very large output texts in terminal. Sometimes some lines of texts goes out of the terminal during command execution. How to get that texts? Update: I mean the terminal that comes ...
0
votes
2answers
40 views

Why doesn't this second nohup command run?

Everything runs except the last line: #!/bin/bash xinput set-prop 11 "Device Accel Profile" -1 xinput set-prop 11 "Device Accel Velocity Scaling" 1 xinput set-prop 11 "Device Accel Constant ...
0
votes
2answers
448 views

terminal ls command not showing all files

I'm familiarizing myself with the terminal, and trying to use the ls command is the directory /usr/bin. Unfortunately, it doesn't show me everything in the folder, the terminal cuts it off. How ...
0
votes
1answer
49 views

How to open the terminal with specific command already run? Best at Unity Launcher! [duplicate]

I know how to add a command to the Unity Launcher, but don't know how to have automatically opened terminal for the command. Especially needed when sudo command needs password or command result ...
0
votes
0answers
15 views

profile not working with gnome3 terminal

I created a profile in ubuntu unity 14.04 to give a transperent background and black in color. When I apply in unity it works but as I was repeating it with gnome 3 terminal noting is happening I am ...
3
votes
0answers
36 views

How to reset errornous font in promt and output of gnome-terminal

I'm experiencing replacement of all occurances of certain characters in the prompt and output of gnome-terminal (3.6.2 in Ubuntu 14.04), e.g. (latin d is replaced with some kind of uppercase D in ...
0
votes
0answers
18 views

out sound from the terminal

In a lot of Hollywood movies when the ace hacker has just created a script to bring down the bad guys network the terminal makes a sound as the script outputs, a sort of digital typing that the ...
1
vote
2answers
44 views

Terminal shortcut to go to beginning of command? [duplicate]

For example, forgetting to put sudo and having to go back to the beginning of the command.
1
vote
0answers
11 views

how to send different outout to multiple terminal on the same machine [duplicate]

I want to be able to run my Python scripts in one terminal but to print the useful output to another terminal on the same machine. Having the ability to refresh the terminal with the useful output ...
25
votes
2answers
845 views

Write command in one terminal, see result on other one

I want to run a command foo on one terminal and pass the result to another terminal. Is it possible to do this ?
1
vote
2answers
75 views

Error message in terminal on startup

As soon as I startup the terminal (Ubuntu 12.04 LTS), I get the error message: bash: export: `/lib/perl5/site_perl/5.14.2/': not a valid identifier I am not really familiar with Linux yet. How do I ...
1
vote
1answer
11k views

Terminal: sudo: apt-get: command not found

This is my first post here, so let me be welcomed with a serious issue to be answered. Lately some really bad things have been happening with my computer, having to do with lack of icons and all kinds ...
0
votes
1answer
33 views

gnome-terminal - restoring of config for profiles

Where are the profiles for gnome-terminal stored on the filesystem? I recently restored my home folder from backup on a new ubuntu installation, but the profiles for gnome-terminal were not restored. ...
3
votes
3answers
143 views

How can I start a script in a minimised Gnome Terminal?

I can start a command in a new Gnome Terminal as follows: nohup gnome-terminal --window-with-profile=Background --command ls >/dev/null 2>&1& (Based on ...
0
votes
4answers
1k views

Run command on another(new) terminal window

How to run any command in another terminal window? Example: I opened one terminal window and if I run command like apropos editor, then it run and out-puts on that window. But I want to run same ...
0
votes
1answer
59 views

Run PHP (in console) with Geany

Don't tell me I need a server, because I can manually go to terminal and write "php filename.php" and it will run it successfully for me. I just need to know how I can do it from Geany. Proof: ...
0
votes
0answers
126 views

How do I do a NotifyAddrChange

I am running 14.04 Ubuntu, my problem is with Netflix Desktop which will not recognize Pipelight-Silverlight5.1 , I have installed two versions of FireFox one in ubuntu one in Wine both read the ...
0
votes
2answers
367 views

How to download any file using runnable terminal directly to my computer

I want to download file from internet by using Runnable Terminal and I using this command there: wget -O -c "Any_File_Address" And it downloads but I don't know where is downloading I want to ...
1
vote
1answer
25 views

gnome-terminal: can't access url from the terminal by single click [duplicate]

I want to access the url that is printed on the command line. For example, if I see the man pages for dropbox, there are some url links with underlines (i.e. https://www.dropbox.com/)-- The only ...
17
votes
3answers
3k views

Why doesn't “cd” work in a shell script?

What is wrong with this easy script? I just want to write an script which change my directory: A. I put below commands on the file witch its name is pathABC on the /home/alex directory, #!/bin/sh cd ...
0
votes
3answers
124 views

How do I make apt-get install commands not display every package that is installing?

When I install something on terminal, it often shows me a few things for status. For one, it shows download rate (which is fine). However, when I install something, it can display Unpacking ...
2
votes
0answers
89 views

Transparency of terminal

How to make terminal transparent in UBUNTU 14.04. Actually I want to make my ubuntu terminal transparent but the solution given for the same question is not applicable because the given thing that to ...
0
votes
0answers
16 views

Audiobox.fm Quiet Terminal?

I am really enjoying the service offered by Audiobox.fm in regards to acting as a Music Streaming server on Ubuntu 14.04. See Product. I am a novice linux user and would like to know if anyone else ...
3
votes
1answer
218 views

Why are lines with man and news underlined in the terminal?

So I ran the command less < /etc/passwd in the terminal, and the /etc/passwd file is displayed. When I move my cursor over some of the lines (namely the lines beginning with man and news) were ...
0
votes
0answers
46 views

Can't resize font with “ctrl [ shift ] +” and “ctrl [ shift ] - ” in wmii

In my company, I have a Ubuntu 14.04 installed in a virtualbox, I installed wmii on it, everything works fine. But at home, I'm using legitimate Ubuntu 13.10, and installed a wmii on it. The font ...
32
votes
6answers
3k views

Shortcut to clear command line terminal [duplicate]

Is there a shortcut to clear the command line when typing in it instead of keeping backspace pressed for a few long seconds? I ask because I regularly use the Tab key to automatically fill in file ...
-2
votes
1answer
45 views

any way to track an application [duplicate]

I have a software which when I go its directory path in terminal I run ./myprogram and my application start so I want to know how to understand which files are reading by my program which is not ...