A way of describing computing resources and services made available through the Internet that can typically be accessed from anywhere.

learn more… | top users | synonyms

3
votes
0answers
447 views

JUJU Error “ERROR failed to bootstrap environment: waited for 10m0s without being able to connect: ”

Having a bit of a struggle with bootstrapping Juju using juju-quickstart -i With two separate ubuntu clusters, we are having the same exact error (displayed below). I've confirmed I can SSH to ...
2
votes
0answers
121 views

Increase the Landscape deployment time out

I am testing OpenStack deployment using the OpenStack Autopilot installer, however it fails due to a landscape deployment timeout exceeded after more than 45 minutes. Is there any workaround? Could I ...
2
votes
0answers
40 views

How to make apt fail less often?

I'm doing a lot of deploying and tearing down of VMs locally and on several cloud services (on the order of two or three a day) and my biggest problem with this is that apt-get install often fails ...
2
votes
0answers
284 views

Is it possible to use Amazon Glacier as backup target for CloneZilla?

If I boot up a system with the CloneZilla LiveCD, is it possible to create a image of an entire disk and upload it to Amazon Glacier? Edit: Maybe my question could be misunderstood. I know that it is ...
2
votes
0answers
208 views

unable to install Ubuntu Cloud setup on VMWare

I guess this is trivial and most commonly asked question, but I'd reiterate it again here as I'm not able to find a correct solution. I'm trying to install Ubuntu Cloud setup on VMWare using the ...
1
vote
0answers
20 views

Unable to resize Openstack instance

Within my openstack deployment, I'm trying to resize an instance from large (4) to extra-large (5). Horizon claims that it is scheduled, but nothing ever occurs. The machine state doesn't seem to ...
1
vote
0answers
19 views

Hardware upgrades/reconfiguration on Openstack nodes deployed with autopilot

I have a openstack deployed with autopilot. Now I need to do some hardware upgrades on one of my nodes(add RAM and HD). How can/should I do that, since recomissining the node would wipe it clean?
1
vote
0answers
65 views

juju openstack juju-bootstrap not working properly

I have configured juju with local and openstack. I followed the following link: http://blog.felipe-alfaro.com/2014/04/29/bootstraping-juju-on-top-of-an-openstack-private-cloud/ for configuring juju on ...
1
vote
0answers
95 views

Network Tab is missing in Openstack dashboard?

I have successfully configured MAAS and JUJU and after that I have executed following commands; juju deploy --to lxc:0 mysql; juju deploy --to lxc:0 keystone; juju deploy --to lxc:0 ...
1
vote
0answers
50 views

Landscape Deployment slow download causes timeout

I've been troubleshooting deployment timeouts all day and I finally narrowed it down I'm getting about average 100kb/s download speed from the cloud images repository. I've verified that it is not my ...
1
vote
0answers
248 views

Canonical openstack deployment, an issue with JuJU

I'm deploying canonical openstack in my lab environment on following topology: -------------- MAAS + DHCP VM -------------- |-Switch-| |_ Server 1 |_ Server 2 |_ Server ...
1
vote
0answers
18 views

Latest cloud images does not seem to be available on AWS

The latest Trusty cloud images published at https://cloud-images.ubuntu.com/trusty/current/ do not appear to be available on AWS. We normally use this link to locate the latest successful nighly ...
1
vote
0answers
40 views

Secure VMs on own cluster using Openstack and Ubuntu?

I recently got my hands on a bunch of old servers at work. The idea is to be able to deploy VMs across the cluster of machines and hand them out to people at my organization whenever they need a ...
1
vote
0answers
126 views

Node Enlistment for the Canonical Distribution of Ubuntu Openstack

After following the Canonical Distribution of Ubuntu Openstack Guide and the more indepth installation guide, I have single functioning node which is both my region controller and a cluster controller ...
1
vote
0answers
80 views

Is this ufw configuration correct?

I have to link my openstack private cloud on a cloud management platform online. The cloud location is on my private ip (192.168.0.9) , i can't use that ip since the platform need a public ip so i ...
1
vote
0answers
19 views

Ubuntu Cloud Internet Sources Needed for Network Whitelist

We are attempting to deploy Ubuntu Cloud Openstack Juno with MAAS and need to determine each Internet endpoint that Ubuntu Cloud needs to connect to from the LAN. Each destination needs to be white ...
1
vote
0answers
60 views

juju charm nova-cloud-controller exposing scheduler interface

I'm working on integrating a nova-cloud-controller with a custom scheduler plug-in, which requires to be installed in the same container of the nova-cloud-controller (install scheduler plug-in, filter ...
1
vote
0answers
375 views

How do I automatically upload/sync files with Amazon Cloud Storage?

How do I automatically upload/sync my files to Amazon Cloud Storage (not S3)? I'm using 14.04
1
vote
0answers
36 views

What are ubuntu/juju image metadata

Could someone explain me what this page wants to say? i really dont get what and mainly why it is written there what is there. https://juju.ubuntu.com/docs/howto-privatecloud.html Ive own HW, with ...
1
vote
0answers
555 views

How to solve openstack instance error “no valid host found”?

I've deployed openstack using juju and tried to launch a new instance which gives an error "no valid host was found". I've checked out other questions on this community and across the web with same ...
1
vote
0answers
575 views

Trusty Images for Openstack

I 'm in the prozess of creating Trusty images for Openstack. What I have noticed is that the net-install with preseed creates an image of 1.9 GB. I just need a VM with openssh. Is it possible to ...
1
vote
0answers
985 views

Default username/password for Ubuntu Cloud image?

I have downloaded and launched an instance of this image in OpenStack http://cloud-images.ubuntu.com/releases/13.10/release-20140226/ubuntu-13.10-server-cloudimg-amd64-disk1.img But I don't know the ...
1
vote
0answers
290 views

Deploy app on OpenStack deployed locally on single machine

I have deployed OpenStack using DevStack on single Ubuntu 12.04 machine running all services. I actually have to develop a Private Cloud Document Management System Now, I want to know that how do I ...
1
vote
0answers
112 views

How to install OpenStack with Swift?

How can we install Swift in OpenStack while in DevStack there are lots of errors while installing via DevStack with enabling Swift Is there any scripted installation method? Any links?
1
vote
0answers
65 views

How can I use the default generic kernel in a UEC Ubuntu Cloud Image?

I download a UEC style Ubuntu Precise image from http://cloud-images.ubuntu.com/ that I want to use in an OpenStack cloud, but I want to make some modifications to it before booting the VM. ...
1
vote
0answers
47 views

Check-in/check-out tool for Dropbox in Ubuntu?

Does anyone know whether there is a check-in/check-out tool for Dropbox running Ubuntu? I'm basically looking for the linux version of Notifybox, which only supports Windows.
1
vote
0answers
92 views

Need help with ubuntu cloud

I am looking to start a cloud storage service and i was looking at ubuntu to do that, but i need to know how the public and or clients can signup and use my cloud servers. Can anyone tell me where to ...
0
votes
0answers
10 views

VNC to cloud server?

Is it possible to use VNC to access a server running Ubuntu? I set everything up and ran VNC from my Android phone using my servers IP. To my surprise I ended up with an image of my own desktop which ...
0
votes
0answers
16 views

How to make slaves on cloud trusted trusted for the server to perform parallel execution

I made a task to execute multiple tasks in parallel on different slaves and the command issued by the server, but it asks me each time to enter a password for each slaves and the task fails to ...
0
votes
0answers
21 views

How to test parallel computing and execution on Ubuntu

I run a task (CADO-NFS) on 15 virtual machines and it stop print the lines on the master machine as if I run this task only on one machine like my physical machine, how to know if the other machines ...
0
votes
0answers
20 views

where can I find minimum requirements of each ubuntu cloud images?

where can I find minimum requirement of each image, those prepared for download. I mean detail information of image, Like minimum hard disk (storage)? I want to set flavor as minimum as possible, ...
0
votes
0answers
22 views

How to remove objects when I remove files in cephfs

I implemented ceph service on my nodes. I use ceph filesystem and mounting all my nodes with ip address of monitor with the same name (admin) and same secret file in order that all my node can access ...
0
votes
0answers
23 views

Install Google Drive Sync for Windows using Wine

Is there a way to install the googledrivesync.exe using Wine? I've tried various alternative clients, but they are somewhat limited, and other guides I've followed are somewhat outdated.
0
votes
0answers
11 views

How to run CADO-NFS on a single virtual machine and multiple virtual machines

I got the following problem about the address of the host when I tried to execute on single virtual machine and also on multiple virtual machines. Info:root: Using default parameter file ...
0
votes
0answers
23 views

controlling cloud-init multi-part sequence

Currently I have a cloud-init multipart input created by write-mime-multipart --output=combined-userdata.txt \ my-upstart-job.txt:text/upstart-job \ my-user-script.txt:text/x-shellscript \ ...
0
votes
0answers
42 views

Only 3 Hypervisors available with HA deployment - Openstack - Autopilot

I have "successfully" deployed Openstack with Autopilot, I have 6 nodes and have HA configured. My understanding was that it should be deployed with compute and storage everywhere. But when I do a ...
0
votes
0answers
18 views

Script for rsyncing to cloud drive (webdav)

How could I make a script to sync all my files from a local server to a cloud space? This is intended to work as backup. Problem: Check if the cloud drive is connected, if not, connect it. As it's ...
0
votes
0answers
13 views

Used Backup storage located it to a encrypted file directory thats synced to the Cloud “scenario”

So I used the encfs command to create a encrypted file directory and the decrypted file. I basically followed this tut here how-to-encrypt-cloud-storage-on-linux-and-windows-with-encfs I used the ...
0
votes
0answers
33 views

OpenStack & Service Chaining

I'm quite new to OpenStack and for my internship I've to implement a OpenStack environment and to add service chaining in it, in order to have a VM with DPI. I tried to find some tutorials but i ...
0
votes
0answers
34 views

Openstack scale without landscape?

So I am a VMware user for some time now and not very satisfied anymore (mainly, because of the number of functions that cost A LOT of money, that I simply can not pay). So I was looking around at the ...
0
votes
0answers
21 views

Ubuntu Cloud OVA Image User

We have downloaded the following OVA, deployed it in ESXi 6, started it, and tried to log in to the console and was UNABLE to get access. user: ubuntu password: ubuntu does not work - "Login ...
0
votes
0answers
24 views

How to safely replace hard drives on openstack autopilot cloud

I have a couple of maintenance questions regarding openstack cloud deployed with landscape autopilot. We will have an ubuntu cloud with 70tb (14X5Tb) in each node (6 nodes for HA). If a hard drive ...
0
votes
0answers
29 views

Ubuntu Autopilot/Ceph - What is the maximum disk size that nodes in cloud should have due to Ceph rebuild time?

We are building an OpenStack cloud using Canonical's OpenStack autopilot. We are currently using servers that have 14 3.5" hard drive slots with 5 TB in each slot for a total of 70 TB per server. We ...
0
votes
0answers
9 views

anyway to take vhd backup of local desktop machine?

I was trying to build some app from source. Now I realize that my system configuration is not enough to build it. Now I am considering loading up my desktop on windows azure. I'd want to load the ...
0
votes
0answers
26 views

openstack-autopilot ext network HA

How do I achieve HA with my external network? I have one cable from my provider, do I run this trough a switch, and connect the two network nodes to that switch? And the stack takes care of the rest? ...
0
votes
0answers
64 views

Ubuntu OpenStack Autopilot - cannot access nodes

I have a problem with this software. I follow this guide and with many bugfixes later I managed to complete it. The problem comes when I log into the OpenStack Dashboard and try to do something there. ...
0
votes
0answers
19 views

Where my file disappeared?

I was trying to download 1.1 GB file from MEGA cloud storage. In the beginning, I didn't get a "Save As" nautilus window as usual. Though the file was actually downloading to my system. Then I got a ...
0
votes
0answers
24 views

Stuck at Seafile installation on RPI

I'm following the instructions on this manual to install Seafile on Rpi as I'm trying to setup my own cloud storage. I think this is a very basic question. I'm stuck at installing libzdb where it ...
0
votes
0answers
38 views

How to tell copy.com to sync folder on my computer

I need to sync a directory (my_dir) in copy. I have looked in the app, and on the website, i could not find. I do not want to put my_dir in the copy directory on my disk, I would like to select my_dir ...
0
votes
0answers
21 views

Ubuntu snappy software update cycle

I want to use Ubuntu snappy for our project which is basically secure update the application. In the Ubuntu IoT I found that it has the feature of secure FOTA. The basic idea is- we run snappy on our ...