1
vote
1answer
77 views

SSH remote commands very slow after migrating from 12.10 to 14.04 on EC2

I had a number of 12.10 machines running on EC2 and provisioned them using scripts built around: ssh scp rsync Now I have replaced most of my 12.10 machines with 14.04 machine and am finding that ...
0
votes
0answers
114 views

HAproxy failed to start

HAProxy is configured to use as load balancer for geoserver i followed the procedure explained in this http://geoserver.geo-solutions.it/edu/en/clustering/apache/haproxy.html page and i edited ...
0
votes
1answer
76 views

Ubuntu server remote access?

Hi i'm pretty new to the use of ubuntu server. i had a spare computer laying around and i figured i'd make it into a storage device. I have been able to get the server to work on my home network but ...
0
votes
2answers
272 views

Problem with raid 1 drive /dev/sba which was part of /dev/md0 now degraded into /dev/md127

root@bew:~# uname -a Linux bew 3.5.0-23-generic #35~precise1-Ubuntu SMP Fri Jan 25 17:15:33 UTC 2013 i686 i686 i386 GNU/Linux root@bew:~# fdisk -l Disk /dev/sda: 203.9 GB, 203928109056 bytes 255 ...
0
votes
0answers
311 views

Installing DHCP Server on Fog Server using Ubuntu 12.10 when it was not installed initially?

I installed Fog Server 0.32 on Ubuntu 12.10, and when I first did it, I connected it to our network thinking that I was going to get away with ghosting the machines where they sit. However, after ...
3
votes
3answers
165 views

How to merge free space into partion in ubuntu server?

I'm running Ubuntu Server as a virtual machine with VirtualBox in Windows. Because I've ran out of space I resized the virtual machine size from 6 GB to 8 GB. But those 2 GB appear as "Free space" ...
0
votes
0answers
77 views

Disk partition on ubuntu server 12.10

I'm new on Ubuntu. Currently I'm trying to install Ubuntu server 12.10 on Acer AR320 F1 with 300GB SAS HDD. When I'm in the disk partition section, it only shows me 3 choices which are: - CONFIGURE ...
1
vote
1answer
196 views

Why is GRUB failing to install?

I'm trying to install ubuntu Server to a RAID5 array. I have three, 3Tb disks, each with a GPT partition table. I have set up my partitions as follows: /dev/sda 1. 512 Mb physical RAID volume 2. 3 ...
-2
votes
1answer
44 views

No network out of the sudden on Ubuntu 12.10

Recently, I replaced my network card and had few issues with the new card and the network connection on the office Intel Xeon 5500/Core i7 white box server running 64-bit Ubuntu 12.10. I ended up ...
0
votes
0answers
16 views

PPTPD can connect but websites do not work

So I have successfully created and setup a PPTPD server and I cannot access any websites, this does not seem to be a common problem because google has failed to find me an answer.
0
votes
0answers
12 views

Tried to update phpmyadmin, but got “kept back” [duplicate]

# apt-get update ... updates from repo # apt-get upgrade Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: ...
1
vote
1answer
822 views

How to load Ubuntu Server automatically in Grub

This is my /etc/default/grub: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n ...
1
vote
1answer
811 views

What is the easiest way to mount a network drive from an ubuntu 12.04 server?

I have a pc running ubuntu 12.10. I want to share or map storage(2TB Hard-disks)from that machine to a ubuntu server 12.04. 12.10(PC) -----------> 12.04(Server) How can I ...
1
vote
1answer
396 views

Noip not working on ubuntu 12.10

I have used noip on windows, it's a great tool. I have also installed it on ubuntu 12.10, but it seems to be not working somehow. I have apache installed on my machine, I start it with ...
0
votes
1answer
389 views

ffmpeg2 on ubuntu 12.10 quantal server

currently i'm stuck with installing ffmpeg2 via the repository ppa:samrog131/ppa. Why it doesn't work? On various sites it's been said, that the ppa is for ubuntu 12.10. Am i doing something wrong? ...
3
votes
1answer
169 views

Will hardware changes affect system?

I have ubuntu production server 12.10 x64 installed on system with hi end hardware. I want to change mainboard, cpu, and ram to older ones. Basically from current system only hdd will remain ...
1
vote
1answer
102 views

no username on login screen [duplicate]

When I get to the login screen for Ubuntu 12.10, it asks for me to type in my username which I thought I knew but apparently its wrong. When I log into quest, everything is fine except I need a ...
0
votes
4answers
434 views

I deleted all files and folders (including hidden) from /home/username/ now in big trouble

I am logged into a remote ubuntu server, and I accidentally erased the entire /home/username/ directory for the current user. The only thing left is a hidden directory called .gvfs. I don't need ...
0
votes
1answer
384 views

Url rewrite does not work ubuntu server

Currently I am working with a php script but it still contains an unfriendly link (cms.php?Cms=login). I want to turn it into a friendly link /cms/login I have an .htaccess file is created ...
0
votes
1answer
192 views

no upper right icons with Ubuntu 12.10 and lightdm

I have a Ubuntu 12.10 server running in which I have installed lightdm. Now lightdm can boot and I can log in, but when I see the screen, I don't see ANY top right icon. So I cannot logout I cannot do ...
1
vote
0answers
24 views

Revert to Previous Package on Ubuntu Server 12.10

I have a package whose recent update I believe to be causing some issues. When I look in /var/log/apt/history.log I see this: Start-Date: 2013-04-20 18:32:05 Commandline: apt-get upgrade Upgrade: ...
0
votes
1answer
255 views

Minecraft server in ubuntu 12.10

I've been living in a hotel do to a house fire. I have just tried to setup a server for some of my friends to connect and it doens't seem to work. I port forwarded the port 27015 and set that in the ...
2
votes
1answer
6k views

Samba: how can I access a share on a Virtualbox guest (in NAT mode)

My OS: Windows 8 Virtualbox guest: Ubuntu 12.10 server I configured apache server on vbox guest and mapped http, https, ssh port successfully into ubuntu server. It works nice without any problem. ...
2
votes
1answer
314 views

How to get old options back in Nautilus's “Connect to server” window?

I just installed Ubuntu 12.10 with GNOME 3.6 Classic. When I try to use Places -> Connect to server, I get a window missing all the options I was used to in Ubuntu 11.10 (such as SSH). I can only ...
0
votes
1answer
46 views

virtual directory to ubuntu on windows?

Is it possible to create a virtual directory in windows that links to a directory on an Ubuntu 12.10 server? If so, how? I'd like to do it this way because it slows me down to constantly save & ...
5
votes
1answer
191 views

Network problems with Ubuntu Server 12.10

Hey guys im new to the world of ubuntu from what ive been doing so far there is loads of help and it been grate but now ive hit a problem. I am running Ubuntu Server 12.10, and my connection speed is ...
0
votes
1answer
199 views

cannot connect to network in ubuntu server 12.10

I had recently installed an ubuntu 12.10 server edition and i am new to this. During the installation I skipped the configure network section, and now i cant connect to any network. I used the lshw ...
0
votes
1answer
2k views

Ubuntu Server 12.10 not obtaining IP address until a user logs in

I just did a recent install of Ubuntu Server 12.10 (no GUI, command line only) on a new system. I noticed that upon booting the server does not obtain an IP address from my router. However, once I ...
1
vote
1answer
160 views

Ubuntu install from ISO always kicks back to “Ubuntu installer main menu”

I'm trying to install Ubuntu server from ISO, on a system that doesn't have networking connectivity to the Internet, but I'm not able to get past a certain point. Initially, the process proceeds ...
1
vote
2answers
669 views

X11 forwarding issue Ubuntu 12.10 from AIX

Using ubuntu 12.10 and have putty installed, I am using ssh /putty to connect an AIX system once I do that I export the display and run something simple like 'xclock' or 'xterm' Problem is its not ...
2
votes
1answer
123 views

What features should I check on my VPS in order to have a secure box?

I have a VPS with Ubuntu 12.10 server edition, an I connect to it from public/university. I host some web applications on it. I have always been concerned with security issues. What features is needed ...
0
votes
0answers
1k views

Install MySQL 5.6 on Ubuntu 12.10 [duplicate]

I have created a script to automatically install MySQL 5.6 on Ubuntu Server 12.10 (64bit). From all the information I gather I created the following script (different functions that's why you see ...
0
votes
1answer
3k views

Configure Wireless Network 12.10 Command Line

Okay, so I've recently set up a server with Ubuntu Server 12.10 to run as a headless server. When I ran the OS installer/setup it gave me an option to immediately connect to a wireless network (this ...
0
votes
1answer
451 views

Ubuntu Desktop with GUI and SSH access

I used to have Ubuntu Server 12.10, and I used to connect to it with my Windows PC using SSH. All I had to do was turn my server computer on and next thing I could do was run my PuTTY and connect to ...
3
votes
1answer
948 views

Connect to a WPA2-Enterprise Connection via CLI (no desktop)

I've finally installed the drivers for my wireless adapter, however, I can't seem to find anything explaining out to connect to a WPA2-Enterprise connection. I've found many WPA/WEP/WPA2 ...
2
votes
1answer
975 views

Does MaaS 1.2 have a built-in tftp server?

I am trying MaaS 1.2 on 12.10. However as declared it conflicts with tftpd-hpa. My question is does it contain a built-in tftp? I tried to install tftpd-hpa on another node, but there is no ...
2
votes
3answers
756 views

Freeze while installing Server 12.10 from USB

I'm putting together a new computer and trying to install Ubuntu Server 12.10 from USB (no optical drive). I'm using the AMD 64 bit installer (MD5 checksum reported fine) and Pendrive to put it on my ...
0
votes
1answer
325 views

apt-get 307 error

G'day The problem is (for any type of mirror or package) with apt-get update: Failed to fetch http://ubuntu.org.ua/ubuntu/dists/quantal/universe/binary-amd64/Packages 307 Temporary Redirect But: ...
0
votes
1answer
686 views

Ubuntu 12.10. Can't format root partition at installation time

I'm trying to install Ubuntu 12.10 on a Supermicro storage server and have an issue. I am using alternate (text-based) installation cd image and when I get to the Detect disks section it says there ...
1
vote
0answers
456 views

Unable to workout zend server 6 with ubuntu 12.10

While installing zend server 6 as described here http://files.zend.com/help/Zend-Server-6/zend-server.htm#deb_installing_zend_server.htm Official manual of zend server installation It has two ...
4
votes
2answers
2k views

Initialize Script on Startup

Is it possible to initialize a script upon startup in Ubuntu (precisely, Ubuntu Server 12.10)? I need to initialize a script to let the network card work, and so far I couldn't find a way to do so ...
1
vote
0answers
157 views

How do I setup RAID5 on 12.10 server without including system boot disk (after install)?

I have installed Ubuntu 12.10 Server on my HP Microserver. I installed it onto an SSD and now have 4 1TB HDD which I want to configure as RAID5. How do I go about doing this, can I do this from the ...
-1
votes
1answer
782 views

How do I manually install linux backports

I just installed Ubuntu server 12.10 and I am missing the drivers for my ethernet adapter. I have seen this is a common problem for my controller(AR8161) I have downloaded the package ...
2
votes
1answer
1k views

Broadcom 43228 no master mode (and lot of errors)

I'm trying to configure an Ubuntu 12.10 based server. My motherboard is an ASUS P8Z77-V Deluxe with WifiGo module onboard. I want to make it an access-point. I have fought with it for a lot of time ...
0
votes
2answers
601 views

Screen totally freezes in few minutes after upgrade to Ubuntu Server 12.10

Also spikes in CP usage. I am sure it is not a memory issue since I have over 100gb for the Ubuntu OS. It was also giving me errors regarding my graphics card which I managed to correct(I think) ...
1
vote
1answer
642 views

How do I enable a CalDAV server (in an OwnCloud installation) to send email reminders for events?

I have a Lubuntu 12.10 server set up in VMWare VirtualBox with an OwnCloud 4.5.6 installation. One of OwnCloud's functions is as a CalDAV server. OwnCloud's web front-end doesn't yet have an interface ...
2
votes
1answer
276 views

Boot my Mac into External USB Ubuntu Server 12.10

I recently downloaded ubuntu server 12.10 and created an install disk. I then proceeded to boot into the disk and install the server onto an external usb flash drive. After the installation was ...
1
vote
1answer
2k views

Unable to install pecl extension for perl in Ubuntu Server 12.10

I need to call a perl script from my php file. I attempted to install the PECL extension for Perl. I was unsuccessful. I tried the following: pecl channel-update pear.php.net Updating channel ...
0
votes
1answer
419 views

How can I solve my RAID installation problems?

Trying to install Ubuntu Server 12.10 64-bit (also tried 12.04.1 64-bit LTS) with a RAID5 array but machine does not boot grub (I get the black screen with the blinking cursor), and I have tried ...
1
vote
2answers
158 views

Can you run Ubuntu Server from a Desktop computer?

I dont have an actual server, am i able to run Ubuntu server 12.10 on a desktop computer?