Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

Running 10.10, and in the past suspend has worked 100% of the time. In the past few months, suspend only works roughly half the time. When it doesn't work, it results in me having to do a hard reset.

I'm not sure what's causing this, but the relevant lines I can find from kern.log:

Jan 22 22:24:51 core kernel: [63631.678378] iwlagn 0000:03:00.0: ACTIVATE a non DRIVER active station id 0 addr 20:cf:30:c6:3c:7d
Jan 22 22:24:51 core kernel: [63631.692215] wlan0: deauthenticating from 20:cf:30:c6:3c:7d by local choice (reason=3)
Jan 22 22:24:51 core kernel: [63631.756053] cfg80211: All devices are disconnected, going to restore regulatory settings
Jan 22 22:24:51 core kernel: [63631.756061] cfg80211: Restoring regulatory settings
Jan 22 22:24:51 core kernel: [63631.756065] cfg80211: Calling CRDA to update world regulatory domain
Jan 22 22:24:51 core kernel: [63631.847833] cfg80211: World regulatory domain updated:
Jan 22 22:24:51 core kernel: [63631.847838]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 22 22:24:51 core kernel: [63631.847843]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 22 22:24:51 core kernel: [63631.847847]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 22 22:24:51 core kernel: [63631.847851]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 22 22:24:51 core kernel: [63631.847855]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 22 22:24:51 core kernel: [63631.847858]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 22 22:24:51 core kernel: [63632.144340] PM: Syncing filesystems ... done.
Jan 22 22:24:51 core kernel: [63632.152803] PM: Preparing system for mem sleep
Jan 22 23:20:23 core kernel: [63632.376195] Freezing user space processes ... (elapsed 0.01 seconds) done.
Jan 22 23:20:23 core kernel: [63632.393147] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
Jan 22 23:20:23 core kernel: [63632.408132] PM: Entering mem sleep
Jan 22 23:20:23 core kernel: [63632.408163] Suspending console(s) (use no_console_suspend to debug)
Jan 22 23:20:23 core kernel: [63632.408932] sd 2:0:0:0: [sda] Synchronizing SCSI cache
Jan 22 23:20:23 core kernel: [63632.410910] sd 2:0:0:0: [sda] Stopping disk
Jan 22 23:20:23 core kernel: [63632.473335] ata_piix 0000:00:1f.1: PCI INT C disabled
Jan 22 23:20:23 core kernel: [63632.473410] ehci_hcd 0000:00:1d.7: PCI INT D disabled
Jan 22 23:20:23 core kernel: [63632.473440] uhci_hcd 0000:00:1d.1: PCI INT B disabled
Jan 22 23:20:23 core kernel: [63632.473472] uhci_hcd 0000:00:1d.0: PCI INT A disabled
Jan 22 23:20:23 core kernel: [63632.473480] ACPI handle has no context!
Jan 22 23:20:23 core kernel: [63632.473492] sdhci-pci 0000:05:00.2: PCI INT C disabled
Jan 22 23:20:23 core kernel: [63632.473505] ACPI handle has no context!
Jan 22 23:20:23 core kernel: [63632.473508] pciehp 0000:00:1c.0:pcie04: pciehp_suspend ENTRY
Jan 22 23:20:23 core kernel: [63632.473542] ehci_hcd 0000:00:1a.7: PCI INT C disabled
Jan 22 23:20:23 core kernel: [63632.473567] uhci_hcd 0000:00:1a.1: PCI INT B disabled
Jan 22 23:20:23 core kernel: [63632.473590] uhci_hcd 0000:00:1a.0: PCI INT A disabled
Jan 22 23:20:23 core kernel: [63632.475181] e1000e 0000:00:19.0: PME# enabled
Jan 22 23:20:23 core kernel: [63632.475192] e1000e 0000:00:19.0: wake-up capability enabled by ACPI
Jan 22 23:20:23 core kernel: [63632.480113] ACPI handle has no context!
Jan 22 23:20:23 core kernel: [63632.489092] pciehp 0000:00:1c.1:pcie04: pciehp_suspend ENTRY
Jan 22 23:20:23 core kernel: [63632.489124] i915 0000:00:02.0: power state changed by ACPI to D3
Jan 22 23:20:23 core kernel: [63632.518138] PM: suspend of drv:sd dev:2:0:0:0 complete after 109.211 msecs
Jan 22 23:20:23 core kernel: [63632.518159] PM: suspend of drv:scsi dev:target2:0:0 complete after 109.170 msecs
Jan 22 23:20:23 core kernel: [63632.518174] PM: suspend of drv:scsi dev:host2 complete after 109.132 msecs
Jan 22 23:20:23 core kernel: [63632.576380] HDA Intel 0000:00:1b.0: PCI INT B disabled
Jan 22 23:20:23 core kernel: [63632.592037] PM: suspend of drv:HDA Intel dev:0000:00:1b.0 complete after 118.516 msecs
Jan 22 23:20:23 core kernel: [63632.592062] PM: suspend of drv: dev:pci0000:00 complete after 117.842 msecs
Jan 22 23:20:23 core kernel: [63632.592076] PM: suspend of devices complete after 183.605 msecs
Jan 22 23:20:23 core kernel: [63632.592079] PM: suspend devices took 0.184 seconds
Jan 22 23:20:23 core kernel: [63632.617093] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D3
Jan 22 23:20:23 core kernel: [63632.625086] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D3
Jan 22 23:20:23 core kernel: [63632.649092] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D3
Jan 22 23:20:23 core kernel: [63632.677076] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D3
Jan 22 23:20:23 core kernel: [63632.677271] PM: late suspend of devices complete after 85.187 msecs
Jan 22 23:20:23 core kernel: [63632.717077] ACPI: Preparing to enter system sleep state S3
Jan 22 23:20:23 core kernel: [63632.849137] PM: Saving platform NVS memory
Jan 22 23:20:23 core kernel: [63632.855194] Disabling non-boot CPUs ...
Jan 22 23:20:23 core kernel: [63632.960058] CPU 1 is now offline
Jan 22 23:20:23 core kernel: [63632.960062] SMP alternatives: switching to UP code
Jan 22 23:20:23 core kernel: [63632.967545] Extended CMOS year: 2000
Jan 22 23:20:23 core kernel: [63632.967545] Back to C!
Jan 22 23:20:23 core kernel: [63632.967545] PM: Restoring platform NVS memory
Jan 22 23:20:23 core kernel: [63632.967545] Extended CMOS year: 2000
Jan 22 23:20:23 core kernel: [63632.967545] Enabling non-boot CPUs ...
Jan 22 23:20:23 core kernel: [63632.967545] SMP alternatives: switching to SMP code
Jan 22 23:20:23 core kernel: [63632.974615] Booting Node 0 Processor 1 APIC 0x1
Jan 22 23:20:23 core kernel: [63632.967100] Initializing CPU#1
Jan 22 23:20:23 core kernel: [63633.152210] CPU1 is up
Jan 22 23:20:23 core kernel: [63633.153832] ACPI: Waking up from system sleep state S3
Jan 22 23:20:23 core kernel: [63633.573292] i915 0000:00:02.0: restoring config space at offset 0x1 (was 0x900007, writing 0x900407)
Jan 22 23:20:23 core kernel: [63633.573331] pci 0000:00:02.1: restoring config space at offset 0x1 (was 0x900000, writing 0x900007)
Jan 22 23:20:23 core kernel: [63633.573520] uhci_hcd 0000:00:1a.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Jan 22 23:20:23 core kernel: [63633.617076] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.625085] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.625151] uhci_hcd 0000:00:1a.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Jan 22 23:20:23 core kernel: [63633.633084] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.641084] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.641170] ehci_hcd 0000:00:1a.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
Jan 22 23:20:23 core kernel: [63633.649084] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.657084] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.657194] HDA Intel 0000:00:1b.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100102)
Jan 22 23:20:23 core kernel: [63633.657332] pcieport 0000:00:1c.0: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
Jan 22 23:20:23 core kernel: [63633.657513] pcieport 0000:00:1c.1: restoring config space at offset 0x1 (was 0x100107, writing 0x100507)
Jan 22 23:20:23 core kernel: [63633.665085] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.673086] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.673147] uhci_hcd 0000:00:1d.0: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Jan 22 23:20:23 core kernel: [63633.681084] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.689084] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.689152] uhci_hcd 0000:00:1d.1: restoring config space at offset 0x1 (was 0x2800005, writing 0x2800001)
Jan 22 23:20:23 core kernel: [63633.689252] ehci_hcd 0000:00:1d.7: restoring config space at offset 0x1 (was 0x2900106, writing 0x2900102)
Jan 22 23:20:23 core kernel: [63633.697084] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.705084] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.705164] pci 0000:00:1e.0: restoring config space at offset 0x1 (was 0x100005, writing 0x100007)
Jan 22 23:20:23 core kernel: [63633.705454] ahci 0000:00:1f.2: restoring config space at offset 0x1 (was 0x2b00007, writing 0x2b00407)
Jan 22 23:20:23 core kernel: [63633.705789] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100106, writing 0x100506)
Jan 22 23:20:23 core kernel: [63633.720043] firewire_ohci 0000:05:00.1: BAR 0: set to [mem 0xd7efe800-0xd7efefff] (PCI address [0xd7efe800-0xd7efefff]
Jan 22 23:20:23 core kernel: [63633.720114] firewire_ohci 0000:05:00.1: restoring config space at offset 0x3 (was 0x800000, writing 0x802000)
Jan 22 23:20:23 core kernel: [63633.720128] firewire_ohci 0000:05:00.1: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
Jan 22 23:20:23 core kernel: [63633.736041] sdhci-pci 0000:05:00.2: BAR 0: set to [mem 0xd7efe400-0xd7efe4ff] (PCI address [0xd7efe400-0xd7efe4ff]
Jan 22 23:20:23 core kernel: [63633.736108] sdhci-pci 0000:05:00.2: restoring config space at offset 0x3 (was 0x800000, writing 0x804000)
Jan 22 23:20:23 core kernel: [63633.736123] sdhci-pci 0000:05:00.2: restoring config space at offset 0x1 (was 0x2100000, writing 0x2100006)
Jan 22 23:20:23 core kernel: [63633.736675] PM: early resume of devices complete after 163.540 msecs
Jan 22 23:20:23 core kernel: [63633.742709] e1000e 0000:00:19.0: wake-up capability disabled by ACPI
Jan 22 23:20:23 core kernel: [63633.742722] e1000e 0000:00:19.0: PME# disabled
Jan 22 23:20:23 core kernel: [63633.742895] i915 0000:00:02.0: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.742987] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
Jan 22 23:20:23 core kernel: [63633.743014] uhci_hcd 0000:00:1a.0: setting latency timer to 64
Jan 22 23:20:23 core kernel: [63633.743063] usb usb3: root hub lost power or was reset
Jan 22 23:20:23 core kernel: [63633.743101] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
Jan 22 23:20:23 core kernel: [63633.743188] i915 0000:00:02.0: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.743195] i915 0000:00:02.0: setting latency timer to 64
Jan 22 23:20:23 core kernel: [63633.743490] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.743743] uhci_hcd 0000:00:1a.1: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.743752] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
Jan 22 23:20:23 core kernel: [63633.743766] uhci_hcd 0000:00:1a.1: setting latency timer to 64
Jan 22 23:20:23 core kernel: [63633.743802] usb usb4: root hub lost power or was reset
Jan 22 23:20:23 core kernel: [63633.744019] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.744289] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.744302] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 22 (level, low) -> IRQ 22
Jan 22 23:20:23 core kernel: [63633.744316] ehci_hcd 0000:00:1a.7: setting latency timer to 64
Jan 22 23:20:23 core kernel: [63633.744370] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Jan 22 23:20:23 core kernel: [63633.744384] HDA Intel 0000:00:1b.0: setting latency timer to 64
Jan 22 23:20:23 core kernel: [63633.744485] HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
Jan 22 23:20:23 core kernel: [63633.744551] pciehp 0000:00:1c.0:pcie04: pciehp_resume ENTRY
Jan 22 23:20:23 core kernel: [63633.744562] pciehp 0000:00:1c.1:pcie04: pciehp_resume ENTRY
Jan 22 23:20:23 core kernel: [63633.744820] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.745026] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.745035] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Jan 22 23:20:23 core kernel: [63633.745050] uhci_hcd 0000:00:1d.0: setting latency timer to 64
Jan 22 23:20:23 core kernel: [63633.745086] usb usb5: root hub lost power or was reset
Jan 22 23:20:23 core kernel: [63633.745122] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Jan 22 23:20:23 core kernel: [63633.745137] uhci_hcd 0000:00:1d.1: setting latency timer to 64
Jan 22 23:20:23 core kernel: [63633.745172] usb usb6: root hub lost power or was reset
Jan 22 23:20:23 core kernel: [63633.745271] pci 0000:00:1e.0: setting latency timer to 64
Jan 22 23:20:23 core kernel: [63633.745323] ata_piix 0000:00:1f.1: PCI INT C -> GSI 16 (level, low) -> IRQ 16
Jan 22 23:20:23 core kernel: [63633.745329] ata_piix 0000:00:1f.1: setting latency timer to 64
Jan 22 23:20:23 core kernel: [63633.745882] ata2: port disabled. ignoring.
Jan 22 23:20:23 core kernel: [63633.745956] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.746008] ahci 0000:00:1f.2: setting latency timer to 64
Jan 22 23:20:23 core kernel: [63633.746199] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
Jan 22 23:20:23 core kernel: [63633.746212] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
Jan 22 23:20:23 core kernel: [63633.746227] ehci_hcd 0000:00:1d.7: setting latency timer to 64
Jan 22 23:20:23 core kernel: [63633.746338] sdhci-pci 0000:05:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Jan 22 23:20:23 core kernel: [63633.746342] sdhci-pci 0000:05:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
Jan 22 23:20:23 core kernel: [63633.747785] sd 2:0:0:0: [sda] Starting disk
Jan 22 23:20:23 core kernel: [63633.832121] firewire_core: skipped bus generations, destroying all nodes
Jan 22 23:20:23 core kernel: [63633.889113] PM: resume of drv:usb dev:usb6 complete after 141.460 msecs
Jan 22 23:20:23 core kernel: [63633.889140] PM: resume of drv:usb dev:usb5 complete after 141.537 msecs
Jan 22 23:20:23 core kernel: [63633.889148] PM: resume of drv:hub dev:6-0:1.0 complete after 141.462 msecs
Jan 22 23:20:23 core kernel: [63633.889155] PM: resume of drv:hub dev:5-0:1.0 complete after 141.523 msecs
Jan 22 23:20:23 core kernel: [63633.889168] PM: resume of drv:usb dev:usb4 complete after 141.615 msecs
Jan 22 23:20:23 core kernel: [63633.889193] PM: resume of drv:hub dev:4-0:1.0 complete after 141.606 msecs
Jan 22 23:20:23 core kernel: [63633.992079] PM: resume of drv:usb dev:usb3 complete after 244.577 msecs
Jan 22 23:20:23 core kernel: [63633.992113] PM: resume of drv:hub dev:3-0:1.0 complete after 244.581 msecs
Jan 22 23:20:23 core kernel: [63633.992122] PM: resume of drv: dev:ep_81 complete after 187.314 msecs
Jan 22 23:20:23 core kernel: [63634.039150] PM: resume of drv:e1000e dev:0000:00:19.0 complete after 296.470 msecs
Jan 22 23:20:23 core kernel: [63634.064094] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Jan 22 23:20:23 core kernel: [63634.066121] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
Jan 22 23:20:23 core kernel: [63634.066127] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Jan 22 23:20:23 core kernel: [63634.069470] ata3.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
Jan 22 23:20:23 core kernel: [63634.069477] ata3.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Jan 22 23:20:23 core kernel: [63634.069743] ata3.00: configured for UDMA/133
Jan 22 23:20:23 core kernel: [63634.084201] PM: resume of drv:sd dev:2:0:0:0 complete after 336.415 msecs
Jan 22 23:20:23 core kernel: [63634.084235] PM: resume of drv:scsi_device dev:2:0:0:0 complete after 336.404 msecs
Jan 22 23:20:23 core kernel: [63634.104079] usb 3-2: reset full speed USB device using uhci_hcd and address 2
Jan 22 23:20:23 core kernel: [63634.252254] PM: resume of drv:usb dev:3-2 complete after 504.549 msecs
Jan 22 23:20:23 core kernel: [63634.252282] PM: resume of drv:usb dev:3-2:1.0 complete after 504.555 msecs
Jan 22 23:20:23 core kernel: [63634.252310] PM: resume of drv: dev:ep_81 complete after 256.976 msecs
Jan 22 23:20:23 core kernel: [63634.332127] firewire_core: rediscovered device fw0
Jan 22 23:20:23 core kernel: [63634.392089] PM: resume of drv:pcmcia_socket dev:pcmcia_socket0 complete after 139.679 msecs
Jan 22 23:20:23 core kernel: [63634.395190] PM: resume of devices complete after 658.465 msecs
Jan 22 23:20:23 core kernel: [63634.395351] PM: resume devices took 0.656 seconds
Jan 22 23:20:23 core kernel: [63634.395379] PM: Finishing wakeup.
Jan 22 23:20:23 core kernel: [63634.395381] Restarting tasks ... done.
Jan 22 23:20:23 core kernel: [63634.408933] video LNXVIDEO:00: Restoring backlight state
Jan 22 23:20:23 core kernel: [63634.444168] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id
Jan 22 23:20:23 core kernel: [63634.484061] Skipping EDID probe due to cached edid
Jan 22 23:20:23 core kernel: [63634.860368] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
Jan 22 23:20:23 core kernel: [63634.916220] e1000e 0000:00:19.0: irq 42 for MSI/MSI-X
Jan 22 23:20:23 core kernel: [63634.916565] ADDRCONF(NETDEV_UP): eth0: link is not ready
Jan 22 23:20:24 core kernel: [63635.170345] ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jan 22 23:20:27 core kernel: [63639.044664] wlan0: authenticate with 20:cf:30:c6:3c:7d (try 1)
Jan 22 23:20:27 core kernel: [63639.053951] wlan0: authenticated
Jan 22 23:20:27 core kernel: [63639.054028] wlan0: associate with 20:cf:30:c6:3c:7d (try 1)
Jan 22 23:20:27 core kernel: [63639.056430] wlan0: RX AssocResp from 20:cf:30:c6:3c:7d (capab=0x411 status=0 aid=4)
Jan 22 23:20:27 core kernel: [63639.056438] wlan0: associated
Jan 22 23:20:28 core kernel: [63639.084890] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jan 22 23:20:37 core kernel: [63649.649091] wlan0: no IPv6 routers present
Jan 23 00:01:37 core kernel: [66109.346319] iwlagn 0000:03:00.0: ACTIVATE a non DRIVER active station id 0 addr 20:cf:30:c6:3c:7d
Jan 23 00:01:37 core kernel: [66109.360197] wlan0: deauthenticating from 20:cf:30:c6:3c:7d by local choice (reason=3)
Jan 23 00:01:37 core kernel: [66109.374509] cfg80211: All devices are disconnected, going to restore regulatory settings
Jan 23 00:01:37 core kernel: [66109.374520] cfg80211: Restoring regulatory settings
Jan 23 00:01:37 core kernel: [66109.374527] cfg80211: Calling CRDA to update world regulatory domain
Jan 23 00:01:37 core kernel: [66109.408315] cfg80211: World regulatory domain updated:
Jan 23 00:01:37 core kernel: [66109.408319]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
Jan 23 00:01:37 core kernel: [66109.408323]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 23 00:01:37 core kernel: [66109.408328]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 23 00:01:37 core kernel: [66109.408331]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
Jan 23 00:01:37 core kernel: [66109.408335]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
Jan 23 00:01:37 core kernel: [66109.408338]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
share|improve this question
    
This question should instead be filed as a bug report, thanks! Instructions here. –  Jorge Castro Feb 4 '12 at 19:58
add comment

closed as off topic by Marco Ceppi Feb 4 '12 at 21:04

Questions on Ask Ubuntu are expected to relate to Ubuntu within the scope defined by the community. Consider editing the question or leaving comments for improvement if you believe the question can be reworded to fit within the scope. Read more about reopening questions here.If this question can be reworded to fit the rules in the help center, please edit the question.

Browse other questions tagged or ask your own question.