I have a JVC GR-D740E camera with a usb firewire “Pinnacle 510 USB Rev: 2.0” (that works on windows xp).
I've ubuntu 11.10 in dual boot with windows xp.
I've done some steps with no success:
i've installed kino. I opened Kino having the camera opened and in play. When i push the capture button kino returns that the kernel module raw1394 hasn'l loaded.
I've tried with kdenlive that stopped with an error:
Fatal Error." "MLT's SDL module not found
If i do:
gp@gp-desktop:~$ dvgrab
Error: no camera exists
I've tried to find the module:
lsmod | grep 1394
No results
If i do
gp@gp-desktop:/dev$ modprobe raw1394
FATAL: Module raw1394 not found.
I put the modules needed (raw1394,dv1394,ohci1394,iee1394) in /etc/modules.
sudo gedit /etc/modules
copying: iee1394 raw1394 video1394 dv1394
And after i've written a udev rule:
sudo gedit /etc/udev/rules.d/40-permissions.rules
Saving the file with these lines:
KERNEL=="raw1394", GROUP="disk", MODE="0666" KERNEL=="dv1394*", GROUP="video", MODE="0666" KERNEL=="video1394*", GROUP="video", MODE="0666"
But after the reboot the modules hasn't been loaded yet (and the same error in modeprobe)
I found, at this point, that i have to load other modules: firewire-core, firewire-ochi and firewire-sbp2, these are the new modules. I've installed and putting them into /etc/modules.
gp@gp-desktop:~$ lsmod
Module Size Used by firewire_sbp2 18414 0 firewire_ohci 35854 0 firewire_core 56937 2 firewire_sbp2,firewire_ohci
The modules has been loaded after the reboot THE SAME ERROR IN KINO and dvgrab.
i've written a udev rule changing the old module with the new. No results.
I don't know now what i've to do. Any help, please?
