I have 10.10 installed on a netbook with RT3090 hardware and the driver Ubuntu installed was of RT2800, it functions properly, but I decided to get the appropriate drivers, so I did the "make, make install" routine and restarted but the driver hasn't changed, and when I checked the "Additional Hardware" utility I see that the RT3090 driver is "activated but not in use". so my question is how to use it?
The "Additional Hardware" utility (called jockey) sometimes doesn't behave correctly, when you compiled the drivers yourself. You can just deactivate the driver and then activate it again to accomplish what you want to do. After that, restart.
What happens "under the hood":
jockey makes sure the driver is not blacklisted in
If this doesn't work, do it by hand: First figure out the name of your current driver by running
In this case the driver is ath5k. Prevent this driver from loading by adding the line
Now make sure your new driver (say ath_pci) is loaded on boot, by adding its name on a new line in the file
I had the same problem until I found an Internet source suggesting the following procedure. I tried it myself on my hp dv6 64bit version of ubuntu with the same wireless network card (Ralink RT 3090), and it worked.
Run this command in a Terminal window (Ctrl+Alt+T) or Run dialog (Alt+F2):
This opens the
Add this as a new line in the file:
Then save the file and close the text editor window. Then restart your computer and hopefully that will work just as it did for me.
It now connects to Wi-Fi without any problem what so ever, and the Additional Drivers tool now correctly says that the driver is installed and in use.