-1

i have a hp pavillion laptop. i have installed ubuntu 15.04. for the first time ubuntu has problem detecting wireless network. i am posting data here. if anyone could help me out it would be of great help to me

    ======== Wireless-Info START ========

System-Info ~~~~~~~~~~~~~~~~~~~~~~~~

maripuri 3.19.0-26-generic x86_64,  Ubuntu 15.04, vivid

CPU    : Intel(R) Core(TM) i5-5200U CPU @ 2.20GHz
Memory : 3880 MB
Uptime : 07:08:39 up 23:37,  2 users,  load average: 0.14, 0.29, 0.23


lspci ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

08:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723]
    Subsystem: Hewlett-Packard Company Device [103c:804c]
    Kernel driver in use: rtl8723be
09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 0a)
    Subsystem: Hewlett-Packard Company Device [103c:8096]
    Kernel driver in use: r8169


lsusb ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 04f2:b50c Chicony Electronics Co., Ltd 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


PCMCIA Card Info ~~~~~~~~~~~~~~~~~~~



iwconfig ~~~~~~~~~~~~~~~~~~~~~~~~~~~

wlan0     IEEE 802.11bgn  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry short limit:7   RTS thr=2347 B   Fragment thr:off
          Power Management:off



rfkill ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

      Interface        Soft blocked  Hard blocked
0: phy0: Wireless LAN      no            yes


lsmod ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

rtl8723be              94208  0 
btcoexist              53248  1 rtl8723be
rtl8723_common         24576  1 rtl8723be
rtl_pci                28672  1 rtl8723be
rtlwifi                77824  2 rtl_pci,rtl8723be
mac80211              724992  3 rtl_pci,rtlwifi,rtl8723be
hp_wmi                 16384  0 
sparse_keymap          16384  1 hp_wmi
cfg80211              540672  2 mac80211,rtlwifi
mxm_wmi                16384  1 nouveau
wmi                    20480  3 hp_wmi,mxm_wmi,nouveau


module parameters ~~~~~~~~~~~~~~~~~~

cfg80211      (2): cfg80211_disable_40mhz_24ghz=N | ieee80211_regdom=00
mac80211      (6): beacon_loss_count=7 | ieee80211_default_rc_algo=minstrel_ht | max_nullfunc_tries=2 | max_probe_tries=5 | minstrel_vht_only=Y | probe_wait_ms=500
rtl8723be     (6): debug=0 | disable_watchdog=N | fwlps=Y | ips=Y | swenc=N | swlps=N
wmi           (2): debug_dump_wdg=N | debug_event=N


nm-tool ~~~~~~~~~~~~~~~~~~~~~~~~~~~~


================o======o========o========o=========o===========o==============o===========
 Interface & ID | Type | Driver | State  | Default | Speed     | Support      | HW Addr   
================o======o========o========o=========o===========o==============o===========
                |      |        |        |         |           |              |           
----------------+------+--------+--------+---------+-----------+--------------+-----------


NetworkManager.state ~~~~~~~~~~~~~~~
[main]
NetworkingEnabled=true
WirelessEnabled=true
WWANEnabled=true
WimaxEnabled=true


NetworkManager.conf ~~~~~~~~~~~~~~~~

[main]
plugins=ifupdown,keyfile,ofono
dns=dnsmasq

no-auto-default=<MAC ID removed>,

[ifupdown]
managed=false


NM WiFi Profiles ~~~~~~~~~~~~~~~~~~~

Hotspot              : ssid=maripuri | autoconnect=false | mac-address=<MAC wlan0> | ipv4=shared | ipv6=auto 
Maripuri             : ssid=Maripuri | mac-address=<MAC wlan0> | ipv4=auto | ipv6=auto 
netgear1334          : ssid=netgear1334 | mac-address=<MAC wlan0> | ipv4=auto | ipv6=auto 


interfaces ~~~~~~~~~~~~~~~~~~~~~~~~~

# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback

resolv.conf ~~~~~~~~~~~~~~~~~~~~~~~~

nameserver 127.0.1.1


Routes & Ping ~~~~~~~~~~~~~~~~~~~~~~

Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         10.0.0.1        0.0.0.0         UG    1024   0        0 eth7
10.0.0.0        0.0.0.0         255.255.255.0   U     0      0        0 eth7
169.254.0.0     0.0.0.0         255.255.0.0     U     1000   0        0 eth7

--- 10.0.0.1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 999ms
rtt min/avg/max/mdev = 0.374/0.390/0.407/0.025 ms

--- 127.0.1.1 ping statistics ---
2 packets transmitted, 2 received, 0% packet loss, time 999ms
rtt min/avg/max/mdev = 0.019/0.021/0.024/0.005 ms


iw reg get ~~~~~~~~~~~~~~~~~~~~~~~~~

(Region : "en_IN")
country 00: DFS-UNSET
    (2402 - 2472 @ 40), (3, 20), (N/A)
    (2457 - 2482 @ 40), (3, 20), (N/A), NO-IR
    (2474 - 2494 @ 20), (3, 20), (N/A), NO-OFDM, NO-IR
    (5170 - 5250 @ 40), (3, 20), (N/A), NO-IR
    (5735 - 5835 @ 40), (3, 20), (N/A), NO-IR


iwlist chan ~~~~~~~~~~~~~~~~~~~~~~~~

wlan0     13 channels in total; available frequencies :
          Channel 01 (2.412 GHz) - 13 (2.472 GHz)


iwlist scan ~~~~~~~~~~~~~~~~~~~~~~~~



blacklist ~~~~~~~~~~~~~~~~~~~~~~~~~~

[/etc/modprobe.d/blacklist-ath_pci.conf]
blacklist ath_pci


modinfo ~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[rtl8723be]
filename:       /lib/modules/3.19.0-26-generic/kernel/drivers/net/wireless/rtlwifi/rtl8723be/rtl8723be.ko
firmware:       rtlwifi/rtl8723befw.bin
srcversion:     5C50A9DE21B06ED4EC09E5F
depends:        rtlwifi,rtl8723-common,rtl_pci,btcoexist,mac80211
parm:           swlps:bool
parm:           swenc:using hardware crypto (default 0 [hardware])
parm:           ips:using no link power save (default 1 is open)
parm:           fwlps:using linked fw control power save (default 1 is open)
parm:           msi:Set to 1 to use MSI interrupts mode (default 0)
parm:           debug:Set debug level (0-5) (default 0) (int)
parm:           disable_watchdog:Set to 1 to disable the watchdog (default 0)

[btcoexist]
filename:       /lib/modules/3.19.0-26-generic/kernel/drivers/net/wireless/rtlwifi/btcoexist/btcoexist.ko
srcversion:     0C170EE6883C780D98D7EC3
depends:        

[rtl8723_common]
filename:       /lib/modules/3.19.0-26-generic/kernel/drivers/net/wireless/rtlwifi/rtl8723com/rtl8723-common.ko
srcversion:     251C540A2D3AD38CCA85ED9
depends:        

[rtl_pci]
filename:       /lib/modules/3.19.0-26-generic/kernel/drivers/net/wireless/rtlwifi/rtl_pci.ko
srcversion:     A25DC6D8C53D55DA133BC49
depends:        mac80211,rtlwifi

[rtlwifi]
filename:       /lib/modules/3.19.0-26-generic/kernel/drivers/net/wireless/rtlwifi/rtlwifi.ko
srcversion:     35016235A31CEB1854418E1
depends:        mac80211,cfg80211

[mac80211]
filename:       /lib/modules/3.19.0-26-generic/kernel/net/mac80211/mac80211.ko
srcversion:     DF4E06FB15FF0707074A816
depends:        cfg80211
parm:           minstrel_vht_only:Use only VHT rates when VHT is supported by sta. (bool)
parm:           max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm:           max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm:           beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm:           probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm:           ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)

[hp_wmi]
filename:       /lib/modules/3.19.0-26-generic/kernel/drivers/platform/x86/hp-wmi.ko
srcversion:     10FA3A7A83BC5E7F2D45E22
depends:        wmi,sparse-keymap

[cfg80211]
filename:       /lib/modules/3.19.0-26-generic/kernel/net/wireless/cfg80211.ko
srcversion:     F28307769349A31F4B24FC2
depends:        
parm:           ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm:           cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)

[mxm_wmi]
filename:       /lib/modules/3.19.0-26-generic/kernel/drivers/platform/x86/mxm-wmi.ko
srcversion:     D566C16ECB7E11FB9DF5C84
depends:        wmi

[wmi]
filename:       /lib/modules/3.19.0-26-generic/kernel/drivers/platform/x86/wmi.ko
srcversion:     2E987FE96F7EBB6BFC7E2B2
depends:        
parm:           debug_event:Log WMI Events [0/1] (bool)
parm:           debug_dump_wdg:Dump available WMI interfaces [0/1] (bool)


udev rules ~~~~~~~~~~~~~~~~~~~~~~~~~

# PCI device 0x10ec:0x8168 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC eth0>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"

# PCI device 0x10ec:0x8168 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC eth1>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

# PCI device 0x10ec:0x8168 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC eth2>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth2"

# PCI device 0x10ec:0x8168 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC eth3>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth3"

# PCI device 0x10ec:0x8168 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC eth4>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth4"

# PCI device 0x10ec:0x8168 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC eth5>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth5"

# PCI device 0x10ec:0x8168 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC eth6>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth6"

# PCI device 0x10ec:0x8136 (r8169)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC eth7>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth7"

# PCI device 0x10ec:0xb723 (rtl8723be)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="<MAC wlan0>", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="wlan*", NAME="wlan0"


Custom files/entries ~~~~~~~~~~~~~~~

/etc/modules        : Default
/etc/rc.local       : Default
/etc/modprobe.d     : Not Default
/etc/pm/(cnf|pw|sl) : Not Default

[/etc/modprobe.d]
iwlwifi.conf      : remove iwlwifi \
                    (/sbin/lsmod | grep -o -e ^iwlmvm -e ^iwldvm -e ^iwlwifi | xargs /sbin/rmmod) \
                    && /sbin/modprobe -r mac80211
mlx4.conf         : softdep mlx4_core post: mlx4_en
modesetting.conf  : options cirrus modeset=1
                    options mgag200 modeset=1
qemu-system-x86.conf: options kvm_intel nested=1
rtl8188ee.confReboot.: options rtl8188ee ips=0 fwlps=0

[/etc/pm/power.d/95hdparm-apm] [executable]
#!/bin/sh
# tlp - if tlp is enabled, override corresponding script
#       in /usr/lib*/pm-utils/power.d/

CONFFILE=/etc/default/tlp
LIBDIRS='/usr/lib /usr/lib64'

for d in ${LIBDIRS}; do
    if [ -d "${d}/pm-utils/power.d" ]; then
        blocked="${d}/pm-utils/power.d/${0##*/}"
        break
    fi
done

if [ -n "$blocked" ] && [ -x "$blocked" ]; then
    # else nothing to disable -> don't read $CONFFILE

    if [ -e "$CONFFILE" ] && . "$CONFFILE" && [ "$TLP_ENABLE" = '1' ]; then
        # TLP is enabled -> disable $blocked
        echo "Notice: '${blocked}' disabled by TLP."
    else
        exec "$blocked" $*
    fi
fi

exit 0

[/etc/pm/power.d/disable_wol] [executable]
#!/bin/sh
# tlp - if tlp is enabled, override corresponding script
#       in /usr/lib*/pm-utils/power.d/

CONFFILE=/etc/default/tlp
LIBDIRS='/usr/lib /usr/lib64'

for d in ${LIBDIRS}; do
    if [ -d "${d}/pm-utils/power.d" ]; then
        blocked="${d}/pm-utils/power.d/${0##*/}"
        break
    fi
done

if [ -n "$blocked" ] && [ -x "$blocked" ]; then
    # else nothing to disable -> don't read $CONFFILE

    if [ -e "$CONFFILE" ] && . "$CONFFILE" && [ "$TLP_ENABLE" = '1' ]; then
        # TLP is enabled -> disable $blocked
        echo "Notice: '${blocked}' disabled by TLP."
    else
        exec "$blocked" $*
    fi
fi

exit 0

[/etc/pm/power.d/intel-audio-powersave] [executable]
#!/bin/sh
# tlp - if tlp is enabled, override corresponding script
#       in /usr/lib*/pm-utils/power.d/

CONFFILE=/etc/default/tlp
LIBDIRS='/usr/lib /usr/lib64'

for d in ${LIBDIRS}; do
    if [ -d "${d}/pm-utils/power.d" ]; then
        blocked="${d}/pm-utils/power.d/${0##*/}"
        break
    fi
done

if [ -n "$blocked" ] && [ -x "$blocked" ]; then
    # else nothing to disable -> don't read $CONFFILE

    if [ -e "$CONFFILE" ] && . "$CONFFILE" && [ "$TLP_ENABLE" = '1' ]; then
        # TLP is enabled -> disable $blocked
        echo "Notice: '${blocked}' disabled by TLP."
    else
        exec "$blocked" $*
    fi
fi

exit 0

[/etc/pm/power.d/laptop-mode] [executable]
#!/bin/sh
# tlp - if tlp is enabled, override corresponding script
#       in /usr/lib*/pm-utils/power.d/

CONFFILE=/etc/default/tlp
LIBDIRS='/usr/lib /usr/lib64'

for d in ${LIBDIRS}; do
    if [ -d "${d}/pm-utils/power.d" ]; then
        blocked="${d}/pm-utils/power.d/${0##*/}"
        break
    fi
done

if [ -n "$blocked" ] && [ -x "$blocked" ]; then
    # else nothing to disable -> don't read $CONFFILE

    if [ -e "$CONFFILE" ] && . "$CONFFILE" && [ "$TLP_ENABLE" = '1' ]; then
        # TLP is enabled -> disable $blocked
        echo "Notice: '${blocked}' disabled by TLP."
    else
        exec "$blocked" $*
    fi
fi

exit 0

[/etc/pm/power.d/pci_devices] [executable]
#!/bin/sh
# tlp - if tlp is enabled, override corresponding script
#       in /usr/lib*/pm-utils/power.d/

CONFFILE=/etc/default/tlp
LIBDIRS='/usr/lib /usr/lib64'

for d in ${LIBDIRS}; do
    if [ -d "${d}/pm-utils/power.d" ]; then
        blocked="${d}/pm-utils/power.d/${0##*/}"
        break
    fi
done

if [ -n "$blocked" ] && [ -x "$blocked" ]; then
    # else nothing to disable -> don't read $CONFFILE

    if [ -e "$CONFFILE" ] && . "$CONFFILE" && [ "$TLP_ENABLE" = '1' ]; then
        # TLP is enabled -> disable $blocked
        echo "Notice: '${blocked}' disabled by TLP."
    else
        exec "$blocked" $*
    fi
fi

exit 0

[/etc/pm/power.d/pcie_aspm] [executable]
#!/bin/sh
# tlp - if tlp is enabled, override corresponding script
#       in /usr/lib*/pm-utils/power.d/

CONFFILE=/etc/default/tlp
LIBDIRS='/usr/lib /usr/lib64'

for d in ${LIBDIRS}; do
    if [ -d "${d}/pm-utils/power.d" ]; then
        blocked="${d}/pm-utils/power.d/${0##*/}"
        break
    fi
done

if [ -n "$blocked" ] && [ -x "$blocked" ]; then
    # else nothing to disable -> don't read $CONFFILE

    if [ -e "$CONFFILE" ] && . "$CONFFILE" && [ "$TLP_ENABLE" = '1' ]; then
        # TLP is enabled -> disable $blocked
        echo "Notice: '${blocked}' disabled by TLP."
    else
        exec "$blocked" $*
    fi
fi

exit 0

[/etc/pm/power.d/sata_alpm] [executable]
#!/bin/sh
# tlp - if tlp is enabled, override corresponding script
#       in /usr/lib*/pm-utils/power.d/

CONFFILE=/etc/default/tlp
LIBDIRS='/usr/lib /usr/lib64'

for d in ${LIBDIRS}; do
    if [ -d "${d}/pm-utils/power.d" ]; then
        blocked="${d}/pm-utils/power.d/${0##*/}"
        break
    fi
done

if [ -n "$blocked" ] && [ -x "$blocked" ]; then
    # else nothing to disable -> don't read $CONFFILE

    if [ -e "$CONFFILE" ] && . "$CONFFILE" && [ "$TLP_ENABLE" = '1' ]; then
        # TLP is enabled -> disable $blocked
        echo "Notice: '${blocked}' disabled by TLP."
    else
        exec "$blocked" $*
    fi
fi

exit 0

[/etc/pm/power.d/sched-powersave] [executable]
#!/bin/sh
# tlp - if tlp is enabled, override corresponding script
#       in /usr/lib*/pm-utils/power.d/

CONFFILE=/etc/default/tlp
LIBDIRS='/usr/lib /usr/lib64'

for d in ${LIBDIRS}; do
    if [ -d "${d}/pm-utils/power.d" ]; then
        blocked="${d}/pm-utils/power.d/${0##*/}"
        break
    fi
done

if [ -n "$blocked" ] && [ -x "$blocked" ]; then
    # else nothing to disable -> don't read $CONFFILE

    if [ -e "$CONFFILE" ] && . "$CONFFILE" && [ "$TLP_ENABLE" = '1' ]; then
        # TLP is enabled -> disable $blocked
        echo "Notice: '${blocked}' disabled by TLP."
    else
        exec "$blocked" $*
    fi
fi

exit 0

[/etc/pm/power.d/usb_bluetooth] [executable]
#!/bin/sh
# tlp - if tlp is enabled, override corresponding script
#       in /usr/lib*/pm-utils/power.d/

CONFFILE=/etc/default/tlp
LIBDIRS='/usr/lib /usr/lib64'

for d in ${LIBDIRS}; do
    if [ -d "${d}/pm-utils/power.d" ]; then
        blocked="${d}/pm-utils/power.d/${0##*/}"
        break
    fi
done

if [ -n "$blocked" ] && [ -x "$blocked" ]; then
    # else nothing to disable -> don't read $CONFFILE

    if [ -e "$CONFFILE" ] && . "$CONFFILE" && [ "$TLP_ENABLE" = '1' ]; then
        # TLP is enabled -> disable $blocked
        echo "Notice: '${blocked}' disabled by TLP."
    else
        exec "$blocked" $*
    fi
fi

exit 0

[/etc/pm/power.d/wireless] [executable]
#!/bin/sh
# tlp - if tlp is enabled, override corresponding script
#       in /usr/lib*/pm-utils/power.d/

CONFFILE=/etc/default/tlp
LIBDIRS='/usr/lib /usr/lib64'

for d in ${LIBDIRS}; do
    if [ -d "${d}/pm-utils/power.d" ]; then
        blocked="${d}/pm-utils/power.d/${0##*/}"
        break
    fi
done

if [ -n "$blocked" ] && [ -x "$blocked" ]; then
    # else nothing to disable -> don't read $CONFFILE

    if [ -e "$CONFFILE" ] && . "$CONFFILE" && [ "$TLP_ENABLE" = '1' ]; then
        # TLP is enabled -> disable $blocked
        echo "Notice: '${blocked}' disabled by TLP."
    else
        exec "$blocked" $*
    fi
fi

exit 0

[/etc/pm/power.d/xfs_buffer] [executable]
#!/bin/sh
# tlp - if tlp is enabled, override corresponding script
#       in /usr/lib*/pm-utils/power.d/

CONFFILE=/etc/default/tlp
LIBDIRS='/usr/lib /usr/lib64'

for d in ${LIBDIRS}; do
    if [ -d "${d}/pm-utils/power.d" ]; then
        blocked="${d}/pm-utils/power.d/${0##*/}"
        break
    fi
done

if [ -n "$blocked" ] && [ -x "$blocked" ]; then
    # else nothing to disable -> don't read $CONFFILE

    if [ -e "$CONFFILE" ] && . "$CONFFILE" && [ "$TLP_ENABLE" = '1' ]; then
        # TLP is enabled -> disable $blocked
        echo "Notice: '${blocked}' disabled by TLP."
    else
        exec "$blocked" $*
    fi
fi

exit 0


Kernel boot line ~~~~~~~~~~~~~~~~~~~

BOOT_IMAGE=/boot/vmlinuz-3.19.0-26-generic root=UUID=ecd4fcb4-3903-4d0d-9c55-67a896484dce ro quiet splash vt.handoff=7


dmesg ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

[    0.028176] Initializing cgroup subsys net_cls
[    0.028184] Initializing cgroup subsys net_prio
[    0.930586] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[    0.931026] audit: initializing netlink subsys (disabled)
[    1.065059] wmi: Mapper loaded
[    1.072386] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[   14.256449] r8169 0000:09:00.0 eth7: renamed from eth0
[   15.181573] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
[   15.211677] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[   15.211871] rtlwifi: rtlwifi: wireless switch is on
[   27.279950] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   30.370164] r8169 0000:09:00.0 eth7: link down
[ 1655.138824] IPv6: ADDRCONF(NETDEV_UP): eth7: link is not ready
[ 1655.589754] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1659.082089] rtlwifi: rtlwifi: wireless switch is on
[ 1661.819691] r8169 0000:09:00.0 eth7: link down
[ 1981.263541] IPv6: ADDRCONF(NETDEV_UP): eth7: link is not ready
[ 1981.263888] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 1983.904584] rtlwifi: rtlwifi: wireless switch is on
[ 1984.571833] r8169 0000:09:00.0 eth7: link down
[ 2339.996563] r8169 0000:09:00.0 eth7: link up
[ 3286.781263] r8169 0000:09:00.0 eth7: link down
[ 3295.163650] IPv6: ADDRCONF(NETDEV_UP): eth7: link is not ready
[ 3295.163958] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3297.816675] rtlwifi: rtlwifi: wireless switch is on
[ 3298.491933] r8169 0000:09:00.0 eth7: link down
[ 3852.161857] IPv6: ADDRCONF(NETDEV_UP): eth7: link is not ready
[ 3852.162176] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3853.709470] rtlwifi: rtlwifi: wireless switch is on
[ 3854.376644] r8169 0000:09:00.0 eth7: link down
[ 4662.605213] r8169 0000:09:00.0 eth7: link up
[ 5009.277309] r8169 0000:09:00.0 eth7: link down
[ 5025.909797] r8169 0000:09:00.0 eth7: link down
[ 5028.261141] r8169 0000:09:00.0 eth7: link up
[ 7531.592297] r8169 0000:09:00.0 eth7: link down
[ 7533.717529] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 7535.301869] rtlwifi: rtlwifi: wireless switch is on
[ 7535.316223] r8169 0000:09:00.0 eth7: link down
[ 7538.169958] IPv6: ADDRCONF(NETDEV_UP): eth7: link is not ready
[ 7538.200005] r8169 0000:09:00.0 eth7: link down
[11658.000439] IPv6: ADDRCONF(NETDEV_UP): eth7: link is not ready
[11658.000754] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[11660.064767] rtlwifi: rtlwifi: wireless switch is on
[11660.731952] r8169 0000:09:00.0 eth7: link down
[12950.478395] r8169 0000:09:00.0 eth7: link up
[25353.705109] r8169 0000:09:00.0 eth7: link down
[25390.930943] IPv6: ADDRCONF(NETDEV_UP): eth7: link is not ready
[25390.931312] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[25393.547842] rtlwifi: rtlwifi: wireless switch is on
[25394.207065] r8169 0000:09:00.0 eth7: link down
[25664.844432] r8169 0000:09:00.0 eth7: link up
[25664.854576] r8169 0000:09:00.0 eth7: link up

    ======== Done ========
1

1 Answer 1

0

Try adding this line to /etc/modprobe.d/blacklist.conf :

blacklist hp_wmi

You might have to restart.
if that doesn't work then try to reset the bios.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .