24

I need to change the default TTL of TCP/IP packets sent from my Ubuntu computer. I found the solution for Windows:

  1. To make reg-file:

    Windows Registry Editor Version 5.00
    
    [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\servic es\Tcpip\Parameters]
    "DefaultTTL"=dword:00000081
    
  2. To execute this commands in console:

    netsh int ipv4 set glob defaultcurhoplimit=129
    netsh int ipv6 set glob defaultcurhoplimit=129
    

The question is how should I translate this solution for Ubuntu?

0

2 Answers 2

40

To change the default TTL of TCP/IP packets sent from your Linux computer you can run the following command:

sudo sysctl -w net.ipv4.ip_default_ttl=129

Or:

echo 129 | sudo tee /proc/sys/net/ipv4/ip_default_ttl

Or:

sudo bash -c 'echo 129 > /proc/sys/net/ipv4/ip_default_ttl'

But you have to run one of those commands whenever the computer boots. To make this setting persistent across reboots you could append the following line to the file /etc/sysctl.conf:

net.ipv4.ip_default_ttl=129

You should do the same with ipv6 instead of ipv4 if you want to change the settings for ipv6 as well.

3
  • I used nano to edit /proc/sys/net/ipv4/ip_default_ttl and now I can't see any of my wifi networks
    – Arya
    Jul 3, 2018 at 3:47
  • 1
    Not true for ipv6; in ipv6 they don't call it ttl anymore. The correct variable name for sysctl is net.ipv6.conf.default.hop_limit. Mar 12, 2022 at 11:39
  • ⁺¹, increasing the default 64 to 65 works as a workaround against annoying mobile ISPs in our country that limit internet traffic upon detecting it being shared from the phone.
    – Hi-Angel
    Oct 19, 2023 at 11:08
5

for IPv6:

The other answer here says, "You should do the same with ipv6" but this does not work. IPv6 uses net.ipv6.conf.all.hop_limit and net.ipv6.conf.default.hop_limit. However, these values are overwritten by interface-specific names such as net.ipv6.conf.eth0.hop_limit. To change them all, use:

for N in $(sudo sysctl --all 2>/dev/null |grep -Eo "^net\.ipv6\.conf\.[^\.]+\.hop_limit"); do
    sudo sysctl --write "$N=128"
done

where 128 is the desired new value.

To make this permanent (survive reboot) for IPv4 and IPv6:

sudo sysctl --all 2>/dev/null |grep -E -e "^net\.ipv6\.conf\.[^\.]+\.hop_limit" -e "net.ipv4.ip_default_ttl" |sudo tee /etc/sysctl.d/11-custom-ttl-hop.conf

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .