Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

I want to burn a Windows ISO to a USB device in Ubuntu. How do I do this?

I know how to burn a Ubuntu ISO into a USB device, but with a Windows ISO it's not the same.

share|improve this question

9 Answers 9

up vote 77 down vote accepted

UNetbootin should work: http://unetbootin.sourceforge.net/

Or you could try a bit-by-bit copy:

  1. Insert the USB device and then open Disk Utility (in 10.10 and older, System -> Administration -> Disk Utility).
  2. Select the USB device from the list in the left of the program and detect where it was mounted: /dev/sd[1 letter][optionally 1 number]. For example, /dev/sdc or /dev/sdc1.
  3. Make sure the USB device is unmounted (not safely removed, but unmounted) If it is mounted you can unmount it:

    sudo umount /dev/sd[1 letter][optionally 1 number]
    
  4. Assuming the .iso file is in your home folder, open the terminal and write:

    sudo dd bs=4M if=[ur .iso] of=/dev/sd[that 1 letter]
    

    Example:

    sudo dd bs=4M if=windows7.iso of=/dev/sdc
    

And wait for it to finish. (The "bs=4M" - bit is optional, just makes it faster.)

share|improve this answer
6  
Another way I detect which driver is it: I write "sudo dd if=kubuntu.iso of=/dev/sd" and press Tab a few times before inserting the USB, than I insert the USB stick and press Tab a few times again, and detect which one was added, for example sdc and sdc1 appeared, than I add c at the end and press enter. –  Lilian A. Moraru Jan 28 '12 at 19:40
    
It worked perfect for me! Thank you! –  Thanasis Petsas May 10 '12 at 13:06
4  
@LilianA.Moraru UNetbootin allows you to create bootable Live USB drives for Ubuntu, Fedora, and other **Linux distributions** without burning a CD.. Have you ever succeeded to make a windows usb with it? –  Cornelius Apr 25 at 17:53

I only had 1 live CD from Ubuntu 9.10. So I used this procedure:

  1. Insert the USB device, then open GParted.
  2. Select the USB device from the list near the upper-right corner of the GParted window and detect where it was mounted: /dev/sd[1 letter]. Mine was /dev/sdc.
  3. Make sure the USB device is unmounted (right-click and select unmount). Don't forget to format it to NTFS.
  4. Open a Terminal window and navigate to your windows7.iso or iso file you want to use. I used this line:

    First i went to the filesystem /. Then I went to media because I had a hard drive: cd media. Then I selected my harddrive with cd Hard*. And i ran the last step ↓

  5. The last step is to write this line:

    sudo dd if=[UR .ISO] of=/dev/sd[THAT 1 LETTER]
    

    In my case: sudo dd if=windows7.iso of=/dev/sdc

Don't be mad I'm only 15 years old so correct me if I am wrong and sorry for my bad english, I'm Belgian.

I hope it will work for you.

share|improve this answer
    
+1 Slightly altering this let me boot my DIY OS too. –  Ian Mallett Jul 11 '13 at 4:39
5  
+1 for being 15 and using ubuntu :) –  Hertzel Guinness May 9 at 16:24
    
didn't work for me just using /dev/sdc[letter], also needed to specify the partition like /dev/sdb1 for dd to copy. however, usb booting won't work –  n3rd Jun 20 at 19:22

You can use WinUSB for burning windows iso to pendrive.
Additional details and Ubuntu packages can be found here

Note:-You need minimum 4 GB pendrive for burning windows 7 iso

share|improve this answer

There's a tool called Multisystem which can make a USB drive bootable, and boot various OSes from it - amongst others, Windows XP, Vista and Seven are supported (the program's pages are in French only; the program itself is localized). I was able to boot the WinXP install ISO off a USB flash disk using this tool.

Note that the Windows CD is an install CD, not a usable "live" distribution.

share|improve this answer

I know that question is a bit outdated, but for the sake of compleetness I add a link to a modern standard Ubuntu GUI application for burning iso on a flash drive: Disk Creator.

share|improve this answer
    
Works only with Linux ISO! –  Cornelius Apr 25 at 18:49

It's very simple... We will go step by step :using power iso:

  1. Download and install power iso.
  2. Open power iso.
  3. Click on tools and then create bootable USB drive.
  4. It may ask run as admin. then make it run as admin.
  5. Now browse source image file.
  6. Select destination USB drive and then click start.
  7. done. your bootable USB is ready for installing an operating system from bootable USB.

NOTE: pendrive must be of 4GB or more.

share|improve this answer

If you're using Ubuntu to burn Windows ISO to USB use WinUSB. Unetbootin won't work with Windows ISOs. It supports only Linux distros.

enter image description here

Screenshot from its website.

Install it with:

sudo add-apt-repository ppa:colingille/freshlight
sudo apt-get update
sudo apt-get install winusb
share|improve this answer
    
Your installation routine fails. –  empedokles Jul 26 at 12:20
    
@empedokles yes, it does because WinUSB has not been updated for a while. In the meantime you can do it manually like askubuntu.com/a/487970/269282 –  Cornelius Jul 26 at 13:21

From Windows, try using unetbootin and from a linux distro use this command in terminal (this worked for me, but you will lose the content of the flash drive, so make a copy):

sudo dd if=<ISO_FILE> of=/dev/sd<FLASH_DRIVE_ID>
share|improve this answer
    
Where <FLASH_DRIVE_ID> is a small letter like b, c, d, etc. but how do we know which one? –  user68186 Apr 24 at 17:43
    
it's for burning a Windows ISO . for some reasons when I Launch it to formate in Launch . I got black screen . not working –  user3091970 Apr 24 at 18:15

Ubuntu can mount .iso files from nautilus in Natty.

Have you tried copying the contents of the .iso to the desired USB drive?

From there you should be able to tell your PC to boot from the USB with no problems.

If that Fails to work you can use UNetBootin in order to copy/burn the .iso to disk.

This blog post Describes how to do that.

share|improve this answer
6  
Just copying the files over will definitely not work; bootloader code is also needed. -1 for misinformation. (Unetbootin should work with many bootable CDs, as it copies the files and makes the USB drive bootable; not sure about a Windows bootable CD) –  Piskvor Sep 7 '11 at 15:42

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.