0

I have a 4GB pendrive. I have installed ubuntu 14.04 into it. But, ubuntu is not booting from it. Whenever I try to boot from it, only a black screen is up. May be the bootloader is keep on searching for a valid boot source within my pendrive which does not exist at all. Please help me resolve this problem.

I followed these steps to install ubuntu into my pendrive:

  • I created an extended-partition covering all the 4GB.

  • I created two primary partitions within it.

    • partition one - ext4 filesystem - 3.5 GB

    • partition two - ext2 filesystem - rest of the total memory

  • I used a liveUSB to install ubuntu into my pendrive

  • I chose my partition one - ext4 fs for ubuntu installation with the mount point as /

  • I chose my partition two - ext2 fs as a swap area for the ubuntu to be installed

  • I then hit Install Now which did the installation, similar to an installation in HDD

Have I done anything wrong? Do I need to do more things? Help me use ubuntu from my pendrive. Thanks in advance.


Update: I tried for solutions here and here. Nothing helped. They were just stuffs related to liveUSB creation which is not my case.

4
  • You could also start with a liveUSB. Not much can go wrong then. After bootup you can still choose for a fresh Ubuntu install on your harddrive. Tha'ts the way i did yesterday
    – Terradon
    Feb 11, 2015 at 16:32
  • My case is not creating a liveUSB. I need to install it in my pendrive. I wish to carry it wherever I go.
    – Ramvignesh
    Feb 11, 2015 at 16:34
  • How do I be sure of that MBR stuff? Can you please brief about what is MBR?
    – Ramvignesh
    Feb 11, 2015 at 16:36
  • How do I check whether the bootloader is installed into the MBR?
    – Ramvignesh
    Feb 11, 2015 at 16:40

1 Answer 1

3

The 4GB USB drive is too small for a full install of Ubuntu 14.04

The installer should have refused to install Ubuntu in a 3.5 GB partition. A full install requires about 5GB / partition. So you will need at least an 8 GB USB drive. I recommend a 16 or 32 GB drive if you intend to install many programs and store large personal files.

One thing to remember when you install Ubuntu on an USB drive, from a Live USB is to make sure you choose the correct destination drive for installation as well as the bootloader location.

Your drives are denoted by /dev/sda, /dev/sdb, /dev/sdc etc. Say /dev/sdc is the correct USB drive (check by size). Then during install make sure you choose /dev/sdc for bootloader location. Don't choose partitions inside such as /dev/sdc1. Choosing the whole drive (rather than a partition in it) will install the bootloader in the MBR of that USB drive.

There are other ways of doing a full install in an USB, such as using a virtual machine. See How do I install Ubuntu to a USB key? (without using Startup Disk Creator) for more details.

Hope this helps

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .