Sign up ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free.

So I've been having issues with lots of hard-drive usage during bootup and long bootup lately, and I installed bootchart to get these two bootcharts, but damn are there a lot of unfamiliar system stuff on there, it's hard to tell what is a warning sign, and what is simply normal during boot.

Here is a bootchart with the advantage of a previously packed?/cached? boot:

Here is the same bootchart without the advantage of a packed boot:

Can anyone make suggestions on what this is telling me needs fixing?

share|improve this question
Do you see any disk errors in e.g. /var/log/syslog? Is your disk healthy? (see Palimpsest Disk Utility - SMART data) – arrange Jun 27 '11 at 17:26
I'd suspect a failing hard drive too. Open the disk utility, select your hard drive in the left panel, click on SMART Data and check the values for Reallocated Sector Count, Reallocation Count, Current Pending Sector Count - they should be zero. Also, check Load/Unload Cycle Count (should be below 600,000) and Power-On Hours (personally I replace HDDs after 10,000 hours). – htorque Jun 27 '11 at 17:57
Ouch, my syslog has a constant barrage of: - upstart-udev-bridge[22236]: Disconnected from Upstart - upstart-udev-bridge main process (21779) terminated with status 1 - upstart-udev-bridge main process ended, respawning – Kzqai Jun 27 '11 at 18:35
Constant and ongoing barrage, that is. – Kzqai Jun 27 '11 at 18:42
I guess I'll make another question with that as a topic? – Kzqai Jun 27 '11 at 18:53

1 Answer 1

up vote 1 down vote accepted

So upstart-udev-bridge is a transitional software package to start things up until init gains the ability to do so for itself.

udev deals with starting up devices, it has been known to relate to cdroms, and other hardware devices presumably.

I learned that you can "monitor it" using udevadm monitor.

Here is what I found:

udevadm monitor
monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent

KERNEL[1309201501.345628] change   /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0A:00/power_supply/BAT0 (power_supply)
UDEV  [1309201501.346393] change   /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0A:00/power_supply/BAT0 (power_supply)
KERNEL[1309201502.364125] change   /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0A:00/power_supply/BAT0 (power_supply)
UDEV  [1309201502.365439] change   /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0A:00/power_supply/BAT0 (power_supply)

...repeat forever.

So it's checking for my battery, which somehow one day decided that it wasn't going to be recognized any more. Since a battery is a nice thing to have, I think that it checks on a frequent basis when it can't find one on the laptop.

Sooo, it seems to be a hardware problem that may be resolved when I obtain a working battery for this laptop.

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.