Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

My disk is very slow after I installed ubuntu 10.04 over my old 9.04. Doing some tinkering helped a little:

sudo hdparm -tT /dev/sda1

/dev/sda1:
Timing cached reads: 3668 MB in 2.00 seconds = 1834.11 MB/sec
Timing buffered disk reads: 292 MB in 3.02 seconds = 96.83 MB/sec

sudo hdparm -c1 -d1 -X 66 /dev/sda1

/dev/sda1:
setting 32-bit IO_support flag to 1
HDIO_SET_32BIT failed: Invalid argument
setting using_dma to 1 (on)
HDIO_SET_DMA failed: Inappropriate ioctl for device
setting xfermode to 66 (UltraDMA mode2)
HDIO_DRIVE_CMD(setxfermode) failed: Invalid exchange
IO_support = 0 (default)
HDIO_GET_DMA failed: Inappropriate ioctl for device


sudo hdparm -tT /dev/sda1

/dev/sda1:
Timing cached reads: 4006 MB in 2.00 seconds = 2003.29 MB/sec
Timing buffered disk reads: 312 MB in 3.02 seconds = 103.41 MB/sec

But it is still far too slow. On the other version, I had a custom partition setup, with the home partition with 100GB, and ext3 (and other partitions for swap, boot, root folder and space for a windows partition I never cared to install ).

This time I am using a standard Lynx setup (2 partitions, the swap and the main one with almost 250Gb, using ext4).

Some applications I develop, that use disk for some unit tests, are now very slow to work with. Is there a way to making it faster? Going back to 9.04? Waiting for 10,10? Gparting and making partitions smaller on ext3? I don't know if any of these will work....

share|improve this question
    
That already seems quite fast for a hard disk. Mine is slower and my Lucid runs great. Can you be more specific? –  NightwishFan Oct 2 '10 at 1:56
    
Maybe it is just the way sqlite3 interact with ext4 (badly). On this discussion on datamapper group (groups.google.com/group/datamapper/browse_thread/thread/…) I mention how this affected a friend of mine, working on the same project, who, after a ubuntu update, had his disk also slowed down to a crawl. –  Daniel Ribeiro Oct 8 '10 at 19:05

1 Answer 1

Maybe it has to do with a bad kernel issue: http://ubuntuforums.org/showthread.php?t=1039476

I'll try later installing a server kernel to see if it solves the issue.

Edit: Actually older kernels still do have this issue. Maybe a server kernel?

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.