Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

I built a raid 1 system on ubuntu 14.04 server. When I try to find the /etc/initramfs-tools/conf.d/mdadm, in order to set "BOOT_DEGRADED=true", that file does not exist. The result of the the fdisk is :

    no talloc stackframe at ../source3/param/loadparm.c:4864, leaking memory

Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x000a53ac Device Boot Start End Blocks Id System /dev/sdb1 2048 3905535 1951744 fd Linux raid autodetect /dev/sdb2 * 3905536 1953523711 974809088 fd Linux raid autodetect Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00013ecd Device Boot Start End Blocks Id System /dev/sda1 2048 3905535 1951744 fd Linux raid autodetect /dev/sda2 * 3905536 1953523711 974809088 fd Linux raid autodetect Disk /dev/md1: 998.1 GB, 998070091776 bytes 2 heads, 4 sectors/track, 243669456 cylinders, total 1949355648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/md1 doesn't contain a valid partition table Disk /dev/md0: 1997 MB, 1997471744 bytes 2 heads, 4 sectors/track, 487664 cylinders, total 3901312 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table

and I am concerned about the invalid of the partition table, also.

Thank you.

share|improve this question

put on hold as unclear what you're asking by psusi, guntbert, Eric Carvalho, Luis Alvarado yesterday

Please clarify your specific problem or add additional details to highlight exactly what you need. As it's currently written, it’s hard to tell exactly what you're asking. See the How to Ask page for help clarifying this question.If this question can be reworded to fit the rules in the help center, please edit the question.

    
Did you put a partition on the RAID device (mkfs.ext4 /dev/md1)? Also, you should be able to fix that memory leak by removing SMB password synchronization (pam-auth-update). –  ChrisR. May 14 at 21:44
    
You don't seem to be asking a question... –  psusi May 15 at 3:26
    
The procedure I followed was to partition the disc, then create the md's and finally to add mount points.What I am asking is : " Does the mirroring work ok with these faults?" –  konnn May 15 at 5:41
    
The best way to add additional information to your question is by editing it, with the edit button. It is better visible that way, and comments are mainly for secondary, temporary purposes. Comments are removed under a variety of circumstances. Anything important to your question should be in the question itself. –  guntbert May 15 at 19:46

Browse other questions tagged or ask your own question.