I have a laptop with a Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak].
Here is the adapter information:
stan@pho:~/Downloads$ lspci | grep -i net 02:00.0 Network controller: Intel Corporation Centrino Wireless-N 1000 [Condor Peak] 04:00.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Optima 88E8059 [PCIe Gigabit Ethernet Controller with AVB] (rev 11)
The adapter gets connected, an it gets immediately disconnected. And that is repeated infinite times.
The output of
dmesg | egrep 'wlan0|iwl' show the following lines multiple times:
[ 1752.722768] wlan0: authenticate with 20:aa:4b:cb:40:94 [ 1752.743331] wlan0: send auth to 20:aa:4b:cb:40:94 (try 1/3) [ 1752.750735] wlan0: authenticated [ 1752.754666] wlan0: associate with 20:aa:4b:cb:40:94 (try 1/3) [ 1752.758641] wlan0: RX AssocResp from 20:aa:4b:cb:40:94 (capab=0x411 status=0 aid=2) [ 1752.763976] wlan0: associated [ 1801.420240] wlan0: deauthenticating from 20:aa:4b:cb:40:94 by local choice (reason=3)
It seems the most common solution is to disable the N mode from the wireless card, so I tried this:
sudo modprobe -r iwldvm sudo modprobe -r iwlwifi sudo modprobe iwlwifi 11n_disable=1
But it is still not working.
I can confirm that the issue is related to the Wireless N mode. If I go to the admin page of my router and configure it to only use Wireless B/G mode, then my computer can keep a connection with the router.
So, I guess there is something wrong with the commands I typed to disable N mode in the wires adapter of my computer.
Any idea what am I missing?