Everything was working with my dual screens (through AMD Catalyst) and then I needed to change motherboard (to an identical one) because of a faulty network card and now suddenly I can't seem to get AMD Catalyst working again. I have tried to reinstall the drivers according to the command line instructions but when I get to the
sudo aticonfig --initial
step, I simply get
aticonfig: No supported adapters detected.
lspci | grep -i vga gives
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT]
lshw -C video gives:
beskrivning: VGA compatible controller produkt: RV610 [Radeon HD 2400 PRO/XT] tillverkare: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 bredd: 64 bits klocka: 33MHz förmågor: pm pciexpress msi vga_controller cap_list konfiguration: latency=0 resurser: memory:d0000000-dffffff
which I guess might be expected given that the above driver installation fails.
When I browsed dmesg I found:
[ 3.775159] [drm] radeon defaulting to kernel modesetting. [
3.775162] [drm] radeon kernel modesetting enabled. [ 3.775222] radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [
3.775227] radeon 0000:01:00.0: setting latency timer to 64 [ 3.775768] radeon 0000:01:00.0: VRAM: 256M 0x0000000000000000 - 0x000000000FFFFFFF (256M used) [ 3.775771] radeon 0000:01:00.0: GTT: 512M 0x0000000010000000 - 0x000000002FFFFFFF [ 3.779967] [drm] radeon: 256M of VRAM memory ready [ 3.779974] [drm] radeon: 512M of GTT memory ready. [ 3.796895] radeon 0000:01:00.0: WB enabled [
3.796938] radeon 0000:01:00.0: irq 43 for MSI/MSI-X [ 3.796943] radeon 0000:01:00.0: radeon: using MSI. [ 3.796967] [drm] radeon: irq initialized. [ 3.828239] [drm] radeon: ib pool ready. [
3.828828] [drm] radeon: power management initialized [ 3.962015] fbcon: radeondrmfb (fb0) is primary device [ 3.962097] fb0: radeondrmfb frame buffer device [ 3.962110] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:00.0 on minor 0 [ 34.905977] radeon 0000:01:00.0: texture bo too small (1680 1050 26 0 -> 7299072 have 7258112) [ 34.905982] radeon 0000:01:00.0: alignments 1728 64 8 256 [ 34.905984] [drm:radeon_cs_ioctl] ERROR Invalid command stream !
which seems to show some error, but I do not know what it means. Any suggestions?