Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

As the title says, I can connect to WiFi network, but however, I cannot access any of the website over internet. I have just installed a fresh Ubuntu distribution on to my MacBook Pro so I am new to Linux.

I am also not sure what other info to provide. So please advise me in this regard & what type of information needed to help me solve this issue.

I am currently on Ubuntu 13.10.

Output of ifconfig:

eth0      Link encap:Ethernet  HWaddr 10:9a:dd:4d:4d:f0  
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
          Interrupt:16 

lo        Link encap:Local Loopback  
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:65536  Metric:1
          RX packets:1296 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1296 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0 
          RX bytes:98244 (98.2 KB)  TX bytes:98244 (98.2 KB)

wlan0     Link encap:Ethernet  HWaddr c8:bc:c8:ef:e4:0d  
          inet addr:192.168.0.192  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::cabc:c8ff:feef:e40d/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2895 errors:0 dropped:0 overruns:0 frame:0
          TX packets:2513 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:820807 (820.8 KB)  TX bytes:321270 (321.2 KB)

Output of iwconfig:

eth0      no wireless extensions.

lo        no wireless extensions.

wlan0     IEEE 802.11abgn  ESSID:"kpke4 Home Network"  
          Mode:Managed  Frequency:2.462 GHz  Access Point: 00:22:B0:B0:98:3B   
          Bit Rate=130 Mb/s   Tx-Power=19 dBm   
          Retry  long limit:7   RTS thr:off   Fragment thr:off
          Power Management:off
          Link Quality=55/70  Signal level=-55 dBm  
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:11   Missed beacon:0

Output for ping -c5 8.8.8.8

PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 
64 bytes from 8.8.8.8: icmp_seq=1 ttl=47 time=35.2 ms 
64 bytes from 8.8.8.8: icmp_seq=2 ttl=47 time=36.8 ms 
64 bytes from 8.8.8.8: icmp_seq=3 ttl=47 time=50.3 ms 
64 bytes from 8.8.8.8: icmp_seq=4 ttl=47 time=35.9 ms 
64 bytes from 8.8.8.8: icmp_seq=5 ttl=47 time=35.4 ms 
--- 8.8.8.8 ping statistics --- 
5 packets transmitted, 5 received, 0% packet loss, time 4005ms
rtt min/avg/max/mdev = 35.257/38.778/50.372/5.827 ms

Output of route -n

Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.0.1     0.0.0.0         UG    0      0        0 wlan0
192.168.0.0     0.0.0.0         255.255.255.0   U     9      0        0 wlan0
share|improve this question
    
Yes, the router shows the connections from my laptop. –  exload Feb 6 at 5:30
    
what was the output of ping -c5 8.8.8.8? –  Avinash Raj Feb 6 at 5:38
    
Output of ping -c5 8.8.8.8 kenny@kenny-MacBookPro:~$ ping -c5 8.8.8.8 PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_seq=1 ttl=47 time=35.2 ms 64 bytes from 8.8.8.8: icmp_seq=2 ttl=47 time=36.8 ms 64 bytes from 8.8.8.8: icmp_seq=3 ttl=47 time=50.3 ms 64 bytes from 8.8.8.8: icmp_seq=4 ttl=47 time=35.9 ms 64 bytes from 8.8.8.8: icmp_seq=5 ttl=47 time=35.4 ms --- 8.8.8.8 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4005ms rtt min/avg/max/mdev = 35.257/38.778/50.372/5.827 ms –  exload Feb 6 at 5:41
    
Hi exload, I would suggest you to edit question and add the output within the question itself. This way it is easy for us to assist you better. Further by looking at your ping results, you've got not loss, which means internet connectivity is there –  AzkerM Feb 6 at 5:42
    

1 Answer 1

Check your DNS settings. Who is the DHCP server? And what DNS server does the DHCP distribute?

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.