Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

I am installing MVAPICH2 on my PC following the instructions given here

But after ./configure I must have makefile. I did ls and found that no such file is there. Because of this make is not working.

What should I do to solve this issue?

I am using Ubuntu 12.04.

Update

root@ubuntu:/home# lspci -nnk | grep -i net -A2
01:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
    Subsystem: Hewlett-Packard Company Device [103c:301d]
    Kernel driver in use: 8139too

Based on the suggestions by Radu Rădeanu I tried:

./configure --with-device=ch3:sock 

still no makefile is generating so my make is not working.

i can see a src folder, so when I go there I found one Makefile.mk. But even there make is not working. Says:

root@ubuntu:/home/acme/Downloads/mvapich2-2.0a/src# make
make: *** No targets specified and no makefile found. Stop.
share|improve this question

1 Answer 1

You should check your network adapter. From http://mvapich.cse.ohio-state.edu/support/mvapich2-2.0a-quick-start.html:

If you’re using a Mellanox InfiniBand, RoCE, or iWARP network adapter you can use the default configuration…

$ ./configure 

If you’re using a QLogic InfiniBand adapter you should use…

$ ./configure --with-device=ch3:psm

See also: http://mvapich.cse.ohio-state.edu/support/user_guide_mvapich2-2.0a.html#x1-50004

share|improve this answer
    
I am having normal LAN connection with Ethernet cards. what do I do? I dont see any option for normal ethernet. –  gpuguy Oct 22 '13 at 11:48
    
@gpuguy Even a normal ethernet card have a name... Have you read/tried everything from here: mvapich.cse.ohio-state.edu/support/…;? –  Radu Rădeanu Oct 22 '13 at 11:54
    
typing lspci at terminal gives: '01:07.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)' now I am not able to understand out of the 5 adapters given in the doc which category this adapter belong to. –  gpuguy Oct 22 '13 at 12:06
    
@gpuguy What is the output of lspci -nnk | grep -i net -A2 command? –  Radu Rădeanu Oct 22 '13 at 12:10
    
its : 01:07.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ [10ec:8139] (rev 10) Subsystem: Hewlett-Packard Company Device [103c:301d] Kernel driver in use: 8139too –  gpuguy Oct 22 '13 at 12:13

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.