Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

i looked at this link and tried all the instructions http://ddudek.pl/?p=39

first i tried this

sudo add-apt-repository ppa:ddudek/stereo3d-stable
sudo apt-get update
sudo apt-get install compiz-plugin-stereo3d

but there was no plugin available

then i tried the build for other distro instructions

couldnt download the code with this

 bzr branch lp:compiz-plugin-stereo3d/stable

i got

 bzr: ERROR: Already a branch: "stable".   

dowloaded the source from here peice by piece:

 http://bazaar.launchpad.net/~ddudek/compiz-plugin-stereo3d/trunk/files/1/

and followed these instructions

 cd [plugin]
 mkdir build
 cd build
 cmake ..
 make
 sudo make install

 Build dependencies are:

 compiz-dev compiz-plugins-main-dev intltool libgconf2-dev libglib2.0-dev 
 libtool libglu1-mesa-dev libjpeg62-dev libxml2-dev libxslt1-dev pkg-config 
 xsltproc libcairo2-dev libpango1.0-dev librsvg2-dev libsm-dev libdbus-1-dev 
 libdecoration0-dev libboost1.46-dev libboost-serialization1.46-dev cmake

but got ::

E: Package 'libboost1.46-dev' has no installation candidate E: Package 'libboost-serialization1.46-dev' has no installation candidate

and the cmake line wasnt complete so of course it didnt run

so if some could help me with step by step instructions i would be very grateful

Edit

ok the cmake .. worked but i got a bunch of error when i tried to make install

 [ 18%] Built target stereoscopicoutput_gsettings_schema
 [ 27%] Built target compiz_gsettings_compile_local
 [ 36%] Building CXX object CMakeFiles/stereoscopicoutput.dir/src/stereoscopicoutput.cpp.o
 In file included from /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.cpp:14:0:
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.h:98:57: error: ‘GLFragment’ has not been declared
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.h:98:76: error: expected ‘,’ or ‘...’ before ‘&’ token
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.h:108:53: error: ‘GLFragment’ has not been declared
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.h:108:72: error: expected ‘,’ or ‘...’ before ‘&’ token
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.h:124:53: error: ‘GLFragment’ has not been declared
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.h:124:72: error: expected ‘,’ or ‘...’ before ‘&’ token
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.h:128:9: error: ‘GLFragment’ does not name a type
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.h:130:9: error: ‘GLFragment’ does not name a type
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.h:295:21: error: ‘GLFragment’ has not been declared
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.h:295:40: error: expected ‘,’ or ‘...’ before ‘&’ token
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.h:301:5: error: ‘GLFragment’ has not been declared
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.h:301:28: error: expected ‘,’ or ‘...’ before ‘&’ token
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.cpp:375:5: error: ‘GLFragment’ has not been declared
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.cpp:375:24: error: expected ‘,’ or ‘...’ before ‘&’ token
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.cpp: In member function ‘bool StereoscopicOutputWindow::glDraw(const GLMatrix&, int)’:
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.cpp:381:5: error: ‘mask’ was not declared in this scope
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.cpp:390:43: error: ‘fragment’ was not declared in this scope
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.cpp:390:53: error: ‘region’ was not declared in this scope
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.cpp: In member function ‘void StereoscopicOutputWindow::glDrawGeometry()’:
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.cpp:476:18: error: ‘class GLWindow’ has no member named ‘glDrawGeometry’
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.cpp: At global scope:
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.cpp:481:5: error: ‘GLFragment’ has not been declared
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.cpp:481:24: error: expected ‘,’ or ‘...’ before ‘&’ token
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.cpp: In member function ‘void StereoscopicOutputWindow::glDrawTexture(GLTexture*, int)’:
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.cpp:484:5: error: ‘GLFragment’ has not been declared
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.cpp:484:24: error: expected ‘;’ before ‘fa’
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.cpp:494:76: error: ‘fa’ was not declared in this scope
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.cpp:510:39: error: ‘fa’ was not declared in this scope
 /home/w/Downloads/stereo-3d-plugin/src/stereoscopicoutput.cpp:510:43: error: ‘mask’ was not declared in this scope
 At global scope:
 cc1plus: warning: unrecognized command line option "-Wno-unused-private-field" [enabled by default]
 make[2]: *** [CMakeFiles/stereoscopicoutput.dir/src/stereoscopicoutput.cpp.o] Error 1
 make[1]: *** [CMakeFiles/stereoscopicoutput.dir/all] Error 2
 make: *** [all] Error 2
 root@w-VirtualBox:/home/w/Downloads/stereo-3d-plugin/build# 

does anyone have any advice from here i layed out my folder the same way as at this link http://bazaar.launchpad.net/~ddudek/compiz-plugin-stereo3d/trunk/files/1/ with those files at that link

share|improve this question
1  
The PPA only has packages for 11.10 and 12.04. Raring has libboost1.49-dev, not 1.46; same with libboost-serialization1.49. –  mikewhatever Oct 13 '13 at 18:35
    
Apparently, there is the cmake .. command according to this. It also explains the reason for the 'build' folder. In short, it should work, just make sure you've installed cmake and all of the dependencies. –  mikewhatever Oct 13 '13 at 18:41
    
@mikewhatever pls see latest edits –  Joeish W Oct 14 '13 at 6:56
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Browse other questions tagged or ask your own question.