Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

really, I do all my efforts to run an android project through eclipse on a tablet "Samsung galaxy Tab s2/ GT-P3100" under Ubuntu 12.04.

i add the vendor id of samsung in ~/.android/adb_usb.ini

   0x04e8

i add rules in /etc/udev/rules.d/51-android.rules as following :

SUBSYSTEMS=="usb", ATTRS{idVendor}=="04e8", ATTRS{idProduct}=="6860", MODE="0666"
ACTION=="add", SUBSYSTEM=="usb", ENV{DEVTYPE}=="usb_device", ENV{ID_USB_INTERFACES}=="*:ff420?:*", MODE="0666"

then , i restart udev & i run the following command

sudo udevadm control --reload-rules

i updates /etc/udev/rules.d/99-android.rules

SUBSYSTEM=="usb", ATTRS{idVendor}=="04e8", SYMLINK+="android_adb", MODE="0666"

the thing that perplexed me is the listing of the tab when running the following cmd :

abdennour@estifeda1:~$ lsusb 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 125f:a11a A-DATA Technology Co., Ltd. 
Bus 002 Device 003: ID 413c:2107 Dell Computer Corp. 
Bus 002 Device 004: ID 046d:c077 Logitech, Inc. 
Bus 001 Device 009: ID 04e8:6860 Samsung Electronics Co., Ltd GT-I9100 Phone [Galaxy S II]

And the device also is well mounted: enter image description here

I finally recourse a very long solution but, as usual, in vain :

share|improve this question

2 Answers 2

up vote 0 down vote accepted

Just to check, your galaxy tab is in developer mode and accepting usb debugging? (I'd make this a comment if I had more rep)

It seems like you are doing everything correct though, this is very tricky...

share|improve this answer

i found the solution , it is a device matter and not Host matter: Hence, i am right when i wrote this question in http://android.stackexchange.com/ and not in askubuntu exchange.

Go to Settings > Developer options> Developer options .

Then, check : USB Debugging enter image description here

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.