anoop@blackTiger:~$ lsusb Bus 004 Device 002: ID 0451:6060 Texas Instruments, Inc. RNDIS/BeWAN ADSL2+ Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 002: ID 045e:00cb Microsoft Corp. Basic Optical Mouse v2.0 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 0781:5567 SanDisk Corp. Cruszer Blade Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
I have a modem, UTStarCom 300R2U Modem. I need to install this using USB. I need to do this for demonstrating a concept to my friends.
lsusb lists this device
Bus 004 Device 002: ID 0451:6060 Texas Instruments, Inc. RNDIS/BeWAN ADSL2+
It is installed but i need a better way to configure this adapter. My modem is configured to connect automatically to INTERNET(Always on option). Can anyone help me to use this modem via usb? pls.. I need to prove that linux is capable of doing everything...
Last few lines of
[ 15.658156] NVRM: loading NVIDIA UNIX x86 Kernel Module 270.29 Wed Feb 23 16:16:53 PST 2011 [ 15.759823] ppdev: user-space parallel port driver [ 17.397141] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0 [ 20.086931] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro,commit=0 [ 25.080006] eth0: no IPv6 routers present [ 165.201492] usb 4-1: USB disconnect, address 2 [ 167.688012] usb 4-1: new full speed USB device using ohci_hcd and address 3
Ubuntu 10.10 fully updated..
anoop@blackTiger:~$ sudo wvdialconf [sudo] password for anoop: Editing `/etc/wvdial.conf'. Scanning your serial ports for a modem. Modem Port Scan<*1>: S0 S1 S2 S3
Installation of ubuDSL fails.. My System just hangs after installation. Restarting solves the issue. But UbuDSL is not installed. Any work around for this?? I need configure this usb device as an Ethernet device(eth1) in networks. how do i set this? I pls help..