I am currently using Ubuntu 10.04. I know there is a 10.10 release, but can I upgrade directly to 11.04? Could you walk me through the steps please?
Ubuntu only supports upgrading from one version to the next version, or from one LTS version to the next LTS version. So you need to upgrade from 10.04 to 10.10, and only then to 11.04.
There are technical reasons for this restriction. When a new version of an existing package is installed it sometimes has to perform conversions, e.g., it may have to import existing settings into a new database format. In performing such conversions the packaging scripts have to make assumptions about the old format. If upgrades from all previous versions of Ubuntu were supported then this would quickly become a maintenance nightmare, as packaging scripts would have to be able to convert from all previously used formats to the current format. To avoid the nightmare, packaging scripts only in general support upgrading from the version of the package included in the previous Ubuntu release (and from the previous LTS release, in the case of a package included in an LTS release).
Upgrading directly from the penultimate, or earlier, version to the current version (called a "skip upgrade) is possible, but is liable to result in a misconfigured system.
To update from an older version (very old in this case) than the previous version to the current version is highly not recommended. You are better off downloading the new release, doing a backup and then installing the new release.
If you are using Ubuntu 10.04 and REALLY REALLY want to update from that version up to the latest version then keep reading, if you are using Ubuntu 10.10 and also want to update from that version up to the latest version go to the second part. I should warn at least users from 10.10 that this involves downloading more than 2GB of data and will take you around a whole day. And even at the end it might be slower, give you errors, your connection will drop at some point or the computer will go crazy. This means that I do not give a guarantee that it will work flawlessly on every PC. So really think about it if you want to upgrade this way. I recommend reading this link: How do I upgrade from 10.04 or 11.10 to 12.04?
Here is an image that shows what 10.04 users should see after 12.04 was released:
UPDATE - if you are reading this after 12.04 came out, there should be an option in the Update Manager in 10.04 that says to upgrade from 10.04 to 12.04. This is the way to go since 12.04 came out.
For historical reasons I will leave the information below for users that wanted to know how to do it before 12.04 came out but if you are still in 10.04 please read here: How do I upgrade from 10.04 or 11.10 to 12.04? since fossfreedom created a very good and complete answer about upgrading from 10.04 to 12.04.
If you are in Ubuntu 10.04 first you need to upgrade from 10.04 to 10.10 then from 10.10 to 11.04.The reason is that 10.04 is a LTS Version (Long Term Support) and as such it upgrades itself from one LTS to the other. So the next LTS would be 12.04. When 12.04 comes you will see an upgrade noticed on your 10.04. But if you still want to upgrade to 11.04 then do the following:
Ubuntu 10.04 to 10.10
When the Update manager opens and it does NOT show the "New Ubuntu Release Available" message in the upper part do the following steps:
2- Click on the SETTINGS button in the Update Manager on the lower left part of it. After the Software Sources Windows opens it should have you in the Update Tab where you will change the option Release Upgrade at the bottom. Change it from the one that it has to Normal Releases then close. What you did here was tell Ubuntu not to check for LTS versions but to check for normal version instead. Normal versions are the ones that come out every 6 months. LTS come out every 2 years. For example 8.04, 10.04, 12.04..
2.1 Open The Update Manager again following the Steps in 1a or 1b.
2.2. Click on the UPGRADE button that should appear there in the upper part. After finishing the upgrade reboot the PC and you should be in 10.10. Test it a little and then if you are 100% sure to go to 11.04 do the following:
Ubuntu 10.10 to 11.04
IMPORTANT - Make sure you have ALREADY updated everything in Ubuntu 10.10. So you are ready for a clean upgrade to 11.04.
NOTE - From LTS to LTS you can actually update. For example 10.04 LTS to 12.04 LTS. But for any other like 10.10 you need to actually update from one release to the other until you get to the final one. In your case, before 12.04 came out you could update from 10.04 to 10.10 and then 10.10 to 11.04 and so on until 11.10. After 12.04 came out you can update directly to 12.04 since it is the next LTS released.
You cannot skip versions between upgrades. The version between Jaunty and Lucid is Karmic. I suggest you do backup important data and do a complete reinstall as many things has changed, including the boot loader.
If you do not like a fresh install, you can upgrade using an Alternate CD.
The upgrade using the alternate CD is described below:
After this upgrade from 9.04 to 9.10, proceed with the upgrade to 10.04 using:
No it's not possible.
using standard upgrade methods.
The only "point to point" release upgrades which work outside of the standard release to release upgrades, are LTS release upgrades. In other words you can upgrade from 8.04 -> 10.04 and 10.04 -> 12.04 without having to upgrade to each of the three other non-LTS versions in between. Otherwise you'll need to go next to 10.10 then to 11.04. Since you're not too far behind it shouldn't take long. Simply run the update manager as you normally would and follow the chain to 11.04.
If you were to try, you could simply pop in an 11.04 disk and install over the 10.10 installation. This should keep all of your home folder contents intact but will result in you having to re-install all of the software you had prior to the "re-installation"
Yes and No!
Yes it is possible - and I've seen a few people try a force upgrade via sudo do-release-upgrade/or manually changing their sources.list - But...
dont do it...
Canonical only support an upgrade from LTS to LTS (i.e. 10.04 to 12.04), or from each intermediate version (10.04 - 10.10 - 11.04 - 11.10 - 12.04 - 12.10 etc.)
If you try to force an upgrade you could most likely break your system - files may not be upgraded or updated and most likely you will have a very strangely behaving system or even a system that wont boot.
I've also seen various people try to backup the /home and restore it on a fresh install. This does usually work - however - I personally prefer to do a clean fresh install a copy specific files from backup. The advantage of just copying specific files is that you clean out all the rubbish you've accumulated over the years.
You'll need to upgrade to 10.10 and then to 11.04. You can use update-manager, but you can also use
You might need to upgrade update-manager-core first, in which case the entire sequence will look like this :
You can repeat the upgrade process to get to 11.04.
You can not skip a release when upgrading Ubuntu. So you will need to first upgrade to 9.10 and then from 9.10 to 10.04.
Jaunty went out of support sometime back. The next version up from Jaunty (Karmic) is also out of support.
You also, cannot jump intermediate versions i.e. not 9.04 to 10.4 - you have to go via 9.10.
Since both Jaunty and Karmic have been removed from the main repositories, you best upgrade route is to download the desktop ISO of 10.04 and do a fresh install.
You should of course, backup any non-hidden files in /home before the install. You can restore these after.
You can do the method above without having to install apache or changing /etc/hosts. Just save the meta-release file from wget somewhere (except on top of /etc/update-manager/meta-release) and edit it as described. Then, in /etc/update-manager/meta-release, change the "URI = http://....." line to "URI = file:///path/to/my/edited/meta-release/file"
Also, for do_release_upgrade to work, in your edited meta-release file, you have to change the archive in the URLs for Release-File, Upgrade-Tool and UpgradeToolSignature from
Thanks this solved problems I was having with upgrading an old system. However, there one enhancement that I used that will make this a lot easier - you don't need to install apache.
Simply use a
So the process is thus (my username is fozzy):
Edit meta-release file in your home directory with your favourite editor so that the "Supported: 0" line in the karmic block now reads: "Supported: 1".
Edit /etc/update-manager/meta-release and make the URIs thus (note the three slashes in a row):
Perform the release upgrade.
The nice thing about this is that there's no need to install apache and everything it pulls in - I was using it on a minimal system and I didn't want all those things pulled in. It also means you can edit the meta-release file without being root.
You only need root for editing the
For those who are planning to clean install, follow the steps below.
What you will need: Separate disk, external HDD recommended.
This is all. Ofcourse this is not error free and it works just if the system has 1 user, etc.
I've found a simple way to by-pass this problem and still upgrade online without the CD.
Note: (updated 2014-07-25) see also Rubo77 answer here. It avoids installing Apache.
1) Install Apache (skip if its already installed):
2) Get the file locally
3) Update the file
Remove all version after Karmic, and change the line
4) Tweak some system files:
Edit /etc/update-manager/meta-release and modify:
(yes, drop the '-lts' part for URI_LTS)
5) Activate apache default server:
5.1) Intermediate state, check that this is working
5.2) If error, try restarting Apache2:
6) Upgrade: check the detailed instructions in the Ubuntu Community Doc. Here is a quick summary:
6.1) Please make sure you have the following sources.list (/etc/apt/sources.list).
6.2) Update the package list and upgrade all the installed packages
6.3) Perform the release upgrade
For step 4) do the following instead:
And then modify /etc/hosts to change changelogs.ubuntu.com to your own server IP. Add a new line with:
After the upgrade, you can remove apache2, restore the system files (/etc/update-manager/meta-release and possibly /etc/hosts).
but based on your error message, I doubt you will get any different results. I've been getting the same error, and I've yet to find a solution.
Automatic, remote, incremental updating to latest version
I will not repeat the answers of others, but I do know how to achieve the effect of going from one old release to the latest. This requires access to another machine with a terminal and ssh installed so that you can automate the process by using ssh and a loop in the shell. See this answer for how to incrementally upgrade from your current version to the latest version.
protected by Braiam Mar 13 at 18:38
Thank you for your interest in this question.
Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.
Would you like to answer one of these unanswered questions instead?