Update (28-11-2013): Ubuntu 13.10 ships with the 3.11 kernel by default. So if you are using this release, all you need to do is add the parameter to the Linux Kernel. I updated the guide accordingly. Also, it looks like by Ubuntu 14.04, DPM will be enabled by default so hopefully this guide will be obsolete by then! ;)
Ok, In the last few days I experimented a bit and got it enabled! It's actually really easy once you found out how to do it.. For people who also want to try it, I'll explain every step. Starting with the installation of the new kernel.
First of all a few points to consider. The Radeon DPM support is only for Radeon HD 2000 (R600) series graphics cards and newer. If you're using a really old ATI Radeon graphics card, the power management support is already tapped out on the open-source driver.
Steps for Ubuntu 13.04 or below only:
To use Radeon DPM you need the Linux 3.11 kernel or newer. You can use the Ubuntu mainline kernel PPA and download the latest stable 3.11 Linux kernel image from this kernel.ubuntu.com directory. Any future kernel updates are fine too and can then also be found in this directory.
Using the dynamic power management feature requires updated firmware for the graphics card. The latest Radeon microcode/firmware can be downloaded from this directory. You need the *_smc.bin files from June. If you're unsure of your specific graphics card codename, you can generally find it from looking at output of lspci -v | less ... The file(s) need to be placed within /lib/firmware/radeon. If you try to use Radeon DPM without the firmware, acceleration will end up being disabled for the GPU. You also need to make sure you have the updated firmware in /lib/firmware/radeon before installing the >3.11 kernel - it will be pulled automagically into the installed image.
All Ubuntu versions:
The Radeon DPM support is not enabled by default with Linux 3.11, so you must add the radeon.dpm=1 parameter to the Linux kernel. For the steps to do so on Ubuntu, see the Ubuntu Wiki about the different ways.
With the new kernel installed, firmware updated and Kernel parameter enabled you should be good to go. You must now reboot your system and you can check if everything is working after that by doing
Note: @luca992 pointed out that the file *radeon_pm_info* could be in a different directory (for example in /sys/kernel/debug/dri/1/ instead of dri/64/). If you're absolutely sure you followed all steps correctly, you can check if this could be the case in your situation.
You should see something like this:
uvd vclk: 0 dclk: 0
power level 0 sclk: 22000 mclk: 25000 vddc: 900
You can further configure DPM by opening /etc/rc.local and adding the following line:
echo parameter > /sys/class/drm/card0/device/power_dpm_state
Where "parameter" can be:
- battery (a set of performance levels targeted for optimal operation on battery)
- balanced (a set of performance levels targeted for optimal every day use)
- performance (a set of performance levels targeted for the highest GPU performance)