Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

i'm configuring one server (ubuntu 12.04 64bits, with kvm) with 2 card adapters. The first one (eth0) is configured to work with virtual bridge (vbr0) for the DMZ interface. Ho can i condigure the second one (eth1) to work with the LAN interface (192.168.1.8 as static IP address). Here is the actual configuration (/etc/newtork/interfaces )

auto lo eth0 eth1 br0

iface lo inet loopback

iface eth0 inet manual

iface br0 inet static
address 192.168.4.8
netmask 255.255.255.0
broadcast 192.168.4.255
network 192.168.4.0
gateway 192.168.4.1
bridge_ports eth0
bridge_fd 9
bridge_hello 2
bridge_maxage 12
bridge_stp off

Thanks for the support!!!

share|improve this question

1 Answer 1

Add these lines to /etc/newtork/interfaces:

iface eth1 inet static
  address 192.168.1.8
  netmask 255.255.255.0
share|improve this answer
    
Thanks for the answer, i'll try tomorrow and post the result! –  yuppar Jul 5 '13 at 20:06

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.