Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

My hard drive stopped working, where I had Ubuntu 13.04 installation. After changing the drive, I did a new Ubuntu 13.04 installation. Nothing else is changed. Previously I had software Raid 0 on two separate hard drives.

How can i restore this software Raid 0?

$ sudo fdisk -l

Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000bdb00

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *        2048  1953523711   976760832   83  Linux

Disk /dev/sdb: 1000.2 GB, 1000203804160 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953523055 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00062713

   Device Boot      Start         End      Blocks   Id  System
/dev/sdb1            2048  1953521663   976759808   83  Linux

Disk /dev/sdc: 128.0 GB, 128035676160 bytes
255 heads, 63 sectors/track, 15566 cylinders, total 250069680 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000ed5c5

   Device Boot      Start         End      Blocks   Id  System
/dev/sdc1            2048   216518655   108258304   83  Linux
/dev/sdc2       216520702   250068991    16774145    5  Extended
/dev/sdc5       216520704   250068991    16774144   82  Linux swap / Solaris

Disk /dev/mapper/pdc_iddajejdd: 2000.0 GB, 1999999991808 bytes
255 heads, 63 sectors/track, 243152 cylinders, total 3906249984 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 65536 bytes / 131072 bytes
Disk identifier: 0x000bdb00

                    Device Boot      Start         End      Blocks   Id  System
/dev/mapper/pdc_iddajejdd1   *        2048  1953523711   976760832   83  Linux

Disk /dev/mapper/pdc_iddajejdd1: 1000.2 GB, 1000203091968 bytes
255 heads, 63 sectors/track, 121601 cylinders, total 1953521664 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 65536 bytes / 131072 bytes
Disk identifier: 0x00000000

Disk /dev/mapper/pdc_iddajejdd1 doesn't contain a valid partition table

$sudo mdadm --assemble --scan

mdadm: No arrays found in config file or automatically

Content of my mdadm.conf

# mdadm.conf
#
# Please refer to mdadm.conf(5) for information about this file.
#

# by default (built-in), scan all partitions (/proc/partitions) and all
# containers for MD superblocks. alternatively, specify devices to scan, using
# wildcards if desired.
#DEVICE partitions containers

# auto-create devices with Debian standard permissions
CREATE owner=root group=disk mode=0660 auto=yes

# automatically tag new arrays as belonging to the local system
HOMEHOST <system>

# instruct the monitoring daemon where to send mail alerts
MAILADDR root

# definitions of existing MD arrays

# This file was auto-generated on Wed, 03 Jul 2013 23:31:05 +0300
# by mkconf $Id$
share|improve this question
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Browse other questions tagged or ask your own question.