Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

I'm trying to connect my Toshiba Satellite running Ubuntu 10.04 to my Eris running Android 2.1 through a Bluetooth connection and establish a dial-up connection (DUN) with the modem. I can connect my phone to my laptop, and I can detect my modem (after installing drivers), which is located at /dev/ttySL0. But when I launch gnome-ppp and enter my phone number (123 for PDA-Net) I get a dialog that says "Connecting... Sending Password" with Log and Cancel buttons. The log shows this:

--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Modem initialized.
--> Please enter password (or empty password to stop):
--> Configuration does not specify a valid login name.

The PDA-Net DUN protocol is running and shows no error. Any ideas?

Any help is much appreciated.

share|improve this question

closed as too localized by qbi, fabricator4, Eric Carvalho, Ringtail, hhlp Jan 13 '13 at 10:54

This question is unlikely to help any future visitors; it is only relevant to a small geographic area, a specific moment in time, or an extraordinarily narrow situation that is not generally applicable to the worldwide audience of the internet. For help making this question more broadly applicable, visit the help center.If this question can be reworded to fit the rules in the help center, please edit the question.

1 Answer 1

From the PDA-Net website:

Since this is just a regular Bluetooth DUN connection, you have 3 ways to initiate the dialup:

  1. You can use the Bluetooth software to connect if available. For some drivers such as the BlueSoleil one, this is the only way you can initiate the connection.
  2. You can open network connections panel and launch the Bluetooth entry.

For 1 and 2, enter phone number #777 and empty username/password when prompted.

share|improve this answer
    
This resource describes the setup for Windows, and may or may not work for Linux. Setting this up on Windows is simple. I have done this on several machines. Linux, however, is more difficult, because the drivers are tricky to install... I can connect to my laptop with my phone, using Bluetooth. This is not the problem. It's the connection. But... I will look into BlueSoleil anyway, as it may have some benefit. –  nicorellius Aug 25 '10 at 15:53
1  
I posted the quote for this snippet "enter phone number #777 and empty username/password when prompted." –  Li Lo Aug 25 '10 at 19:02

Not the answer you're looking for? Browse other questions tagged or ask your own question.