Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

Read entire post CAREFULLY before answering.

This question will make you confused if you don't.

Information (May skip :P)

  • OS : Windows NT 6.2 (Windows 8 K)
  • Equipped hard disk
    • Total 1TB, 1 disk
    • C: (Simple Layout, NTFS, Boot, Pagefile, Crash dump, Main): total 488,039,776,256 bytes, used 93,473,599,488 bytes
    • D: (Simple Layout, NTFS, Main): total 486,859,075,584 bytes, used 8,426,016,768 bytes
    • hidden: Ask if needed
  • Brand(manufacturer): Samsung Electronics
  • Processor(CPU): Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz
  • RAM: 8GB , 64-bit , OS 64-bit

Question (READ THEM ALL VERY CAREFULLY)

  • Is there any way to install Ubuntu on this computer without any external disk (CD, USB drive, etc)
  • Note : This computer is 64-bit, so this issue did not help me.
  • WUBI does not support UEFI, and This computer uses it.
  • No Virtual PC programs like VirtualBox or VMWare, because it takes memory.

EDIT : I already found a USB drive in my home, so now it is installed on my computer xD

share|improve this question
    
You could install VirtualBox in windows, then Ubuntu inside of that... –  Scott Goodgame May 31 '13 at 12:07
add comment

3 Answers 3

up vote 0 down vote accepted

There are 4 ways to install Ubuntu as dual boot on a machine already running windows.

  1. Use a CD. You can't/won't do it.

  2. Use a USB drive. You can't/won't do it.

  3. Use the .iso file in a virtual machine as a means to avoid CD/USB such that it also boots alongside Windows. You claim you can't/won't do it.

  4. WUBI. Not compatible with UEFI.

Sorry, but you're stuck. It may be possible to do something really cunning using Windows ext2 drivers, an iso image extractor and a lot of both Linux and Window know how, but if you could do that you wouldn't need to ask questions here.

I've already provided an answer for machine that have no CD and won't boot from USB. If that's not the solution then you've not communicated your question properly.

share|improve this answer
    
Thanks for the question, and I'm so glad you SUCCEDED reading my question! –  jinoh67 Jun 8 '13 at 3:39
add comment

Do your repartitioning from Windows, it will not let you do any damage to the Windows OS this way. Leave the partitions where you'll install Linux unformatted, I assume you'll want to use ext4 and swap on them, and reserve a small partition, maybe 1GB, for the Linux installation media, that you can format to FAT32; copy the content from your installation ISO (not the ISO file itself) to this partition; add an entry to this partition to the Windows boot loader with EasyBCD, you can find how on the Internet, such as in this article. Note the order of your partitions so you'll remember which one you'll format and install on it, then restart and boot into the Linux live session from the install partition and perform normal installation. The installer will recognize the existing EFI system partition and will copy a boot entry there, but you can add another entry for your installed Linux to the Windows BCD the same way you added for the install partition.

share|improve this answer
    
Can I trust this? –  jinoh67 Jul 12 '13 at 14:31
1  
+1 for actually having a solution. :) –  ams Jul 12 '13 at 14:34
    
@jinoh67 There's plenty of room for cock-up here! Overwriting a partition, or corrupting a file system could happen so easily. But, that's true for any install system, even a LiveCD. –  ams Jul 12 '13 at 14:36
    
@ams I found a USB drive in my home, so now I already installed it! –  jinoh67 Jul 15 '13 at 6:23
    
This is the answer that I would want to upvote more than once. –  Alaa Jul 15 '13 at 6:32
show 5 more comments

Do you have access to a screw-driver and another computer?

Windows must be installed on the same machine that it will run on, but Linux is less fussy. :)

When I've been in this position before I've removed the hard drive from the problem computer and attached it to another computer. (I used a cheap external USB drive enclosure, but you could install it directly into the other computer.)

I'd then install the new OS onto the drive using CD/USB. (Actually, I did it in a Qemu/KVM VM booted from the .iso image, but that was just showing off.)

Finally, I moved the drive back to its real home and it should Just Work. You might have trouble with UEFI though (maybe you can disable secure boot in the settings)?

share|improve this answer
    
I said "Install without CD or DVD", and it is NOT about UEFI problem. Please read all before reading, as I said on the top of the article. –  jinoh67 Jun 2 '13 at 7:26
    
I did read you whole question and you're asking to do the impossible. I therefore presumed you have a problem with your CD/USB on that machine. I didn't say you had a problem with UEFI now; I said you might later. Please read the whole answer. –  ams Jun 3 '13 at 8:39
    
Okay I see it now. Oh no, my laptop doesn't have any CD drive, my USB HDD cable is broken, WUBI not working.... :( –  jinoh67 Jul 12 '13 at 14:30
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.