Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

I have ubuntu 11.10 (XFce) and I download Xubuntu 13.04 64Bit iso file that have 801MB and both brasero and XFburn can't burn that image on 800MB CD-R. Can I burn that image on that CD using overburn (those programs don't have that option, I use to do that on Windows but never on GNU/Linux) or do I need to buy larger CD?

share|improve this question
add comment

5 Answers

up vote 11 down vote accepted

You probably won't find a CD that will (naturally) support that size file, and overburning isn't recommended due to issues.

I'd recommend using a DVD instead, or if that's not an option, a USB drive.

EDIT: I'd emphasize trying to get a DVD... I personally had many issues with using my 8 GB USB drive. The first time I attempted a DVD install was fully successful.

share|improve this answer
    
"isn't recommended due to... issues"? Can you elaborate? What is the danger of overburning, isn't there always some margin on a CD? –  Konerak May 15 '13 at 6:09
1  
I'd recommend a USB. Easier to work with. Use LiLo if you need –  Nanne May 15 '13 at 6:59
    
Some optical drives do not support reading (or, alternatively, writing) past the intended disc max size. Most of these are legacy, but it's always better to stay within the constraints of what we "know" as good practice, in my experience. Otherwise, you're relying entirely on the end-user to be at the mercy of becoming SQA/Tester type mentalities. –  gravity May 15 '13 at 15:06
    
use usb and LiLo or universal usb installer the best option according to me. –  meteors May 27 '13 at 15:28
1  
Using a USB is much easier than it used to be. Most Ubuntu live CD images are hybrid mode nowadays so you can just use a raw image writer to write the exact same image to the USB. –  neon_overload Jun 5 '13 at 1:43
add comment

Besides a DVD, you have several other options.

  1. Super Grub2 disk. Burn the beta5 (or probably any later version) to a CD, and then put the ISO on a flash drive or something in a directory called /boot-isos/. Boot SG2D and select detect loop bootable isos. (Note that SG2D only searches drives for loop bootable ISOs that were detected when SG2D was booted, you don't seem to be able to detect a drive afterwards.)
  2. Ubuntu ISOs are "hybrid" ISOs, which means you can copy them to a flash drive using dd and directly boot off of that. Also, SG2D above is also a Hybrid ISO
  3. UNetbootin and various other tools will copy a ISO file into a flash drive and make it bootable, if you are reluctant to use dd (common nickname is "destroy data" because the syntax is a little weird and mistakes can be tough to recover from.)
  4. U3 smart Flashdrives let you load the ISO file after creating a partition. It will then emulate a CD-ROM, even one with more space than 700 MB providing you set it up with enough space. Unfortunately, they stopped selling these back in 2009. This is a fantastic option for ISO files that are problematic to load, "loop boot", or "chainload" via Grub2. I use u3-tool to remove the inital software and replace it with my choice. You can get this via apt-get from the Ubuntu repositories.
  5. isostick seems like a more expensive way to get modern hardware that does the same thing as buying a vintage U3 flash drive off of ebay
share|improve this answer
add comment

k3b-2.8.2 allowed me to do a (relatively small and non-configurable) overburn, while xfburn wasn't allowing it (reporting low space)

share|improve this answer
    
Why this my theoretically answer the question, this question already has an answer, so it might have place in a comment. –  Wilf Mar 2 at 17:04
    
@Wilf, this question is already full of people, who didn't even once overburn'd on Windows, there were no applications confirmed for the task, recommended answer is about getting DVD/flash memory (and possibly wasting the CD, isn't ecological way..). –  kagali-san Mar 2 at 19:30
    
I will support you on the use of K3B - just this answer came up in the low quality review queue. If you add more info about K3B, the steps you took, a link or something, it may make this a better answer. Also stuff about checking the CD like you said ;) –  Wilf Mar 2 at 19:33
add comment

Of late, I've found dd to be the most reliable way of copying an ISO to a flash drive, and I think that's what you're going to end up doing because they are cheap, common, and large enough. unetbootin has not worked reliably for me the last several times I've used it.

Use

if=filename.iso of=/dev/usbdevice

with filename and usbdevice replaced by the correct values for your system, and you're good to go.

When using dd, always be careful that the input file and the output file are what you want them to be! You can overwrite the contents of your hard drive if you're not careful!!!

share|improve this answer
add comment

You can't burn it to a single layer DVD or split it. What you can do is mount it with something like Daemon Tools and then rip that your hard disk. Once it's in your hard drive and no longer in ISO format you can either shrink it to single layer size with something like DVDShrink or you can possibly split it with something like IFOEdit if you know what you are doing. I would recommend using DVDShrink as it can get complicated to split with IFOEdit if you are not very experienced in doing this.

share|improve this answer
2  
These are all windows tools, and jcubic is on ubuntu 11.10. –  bkd.online May 15 '13 at 7:24
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.