I Currently Have a Running server with multiple KVMs running different Servers within each, now I would like to add another separate interface to serve another group of KVMs on the same server.
There are Currently Three Nic cards in the Box
Nic 1 -- Lan 1 -- Host only
Nic 2 -- Lan 1 -- br0 for the first set of KVMs
Nic 3 -- Lan 2 -- br1 for the second set of KVMs
When I run this one of the Bridges shuts down, normally br0 taking the entire first set offline.
This is my current interfaces:
# This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth1 iface eth1 inet static address 192.168.1.20 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 188.8.131.52 184.108.40.206 220.127.116.11 dns-search firezen.com auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address 192.168.1.21 network 192.168.1.0 netmask 255.255.255.0 broadcast 192.168.1.255 #gateway 192.168.1.1 bridge_ports eth0 bridge_stp off bridge_fd 0 bridge_maxwait 0 iface eth2 inet manual #auto br1 #iface br1 inet static # address 192.168.1.57 # network 192.168.1.0 # netmask 255.255.255.0 # broadcast 192.168.1.255 # gateway 192.168.1.1 # bridge_ports eth2 # bridge_stp off # bridge_fd 0 # bridge_maxwait 0 #auto br1 #iface br1 inet dhcp # bridge_ports eth2 # bridge_stp off < This was what I was using lastly, could not get # bridge_fd 0 the above to work. # bridge_maxwait 0
Both networks are 192.168.1.x based. If you need any other information Please let me know, and Thank you in advanced.