Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

I'm using Ubuntu 12.04. Now up until minutes ago XSensors was working fine. I had to restart due to some updates and it stopped working. By that I mean that it only displays one temperature (the other tab is just blank):

link to screenshot

Here is my the output from $ sensors, to show that there is other data being detected:

k10temp-pci-00c3
Adapter: PCI adapter
temp1:        +27.2°C  (high = +70.0°C)
                       (crit = +90.0°C, hyst = +87.0°C)

fam15h_power-pci-00c4
Adapter: PCI adapter
power1:      115.97 W  (crit = 124.77 W)

it8720-isa-0228
Adapter: ISA adapter
in0:          +1.41 V  (min =  +0.00 V, max =  +4.08 V)
in1:          +1.47 V  (min =  +0.00 V, max =  +4.08 V)
in2:          +3.38 V  (min =  +0.00 V, max =  +4.08 V)
+5V:          +2.94 V  (min =  +0.00 V, max =  +4.08 V)
in4:          +3.06 V  (min =  +0.00 V, max =  +4.08 V)
in5:          +2.91 V  (min =  +0.00 V, max =  +4.08 V)
in6:          +4.08 V  (min =  +0.00 V, max =  +4.08 V)  ALARM
5VSB:         +2.96 V  (min =  +0.00 V, max =  +4.08 V)
Vbat:         +3.17 V  
fan1:        2136 RPM  (min =    0 RPM)
fan2:         724 RPM  (min =    0 RPM)
fan3:        1318 RPM  (min =    0 RPM)
fan4:        1094 RPM  (min =    0 RPM)
temp1:        +34.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermistor
temp2:        +42.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermal diode
temp3:        +39.0°C  (low  = +127.0°C, high = +127.0°C)  sensor = thermal diode
cpu0_vid:    +0.000 V
intrusion0:  ALARM`

Any ideas?

share|improve this question

2 Answers 2

up vote 1 down vote accepted

Since I couldn't get it to work for 2 weeks, i removed XSensors and switched to Psensor. I'd even say it's a better choice for this task.

share|improve this answer

Try running the following command in the terminal:

sudo sensors-detect
share|improve this answer
    
I had done this before to get the sensors command working. Did it again. It changed nothing. XSensors still displayes only one temp –  Borislav Stanimirov Jan 18 '13 at 9:56

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.