8

I've been trying to turn off nvidia PowerMizer (that is set the performance level to 2 - max). I can do it with nvidia-settings, but it goes back to default after restart. Here's what I have tried:

  • nvidia-settings as root - saving settings to xorg.conf and ~/.nvidia-settings-rc
  • adding options nvidia NVreg_RegistryDwords="PerfLevelSrc=0x2222" to /etc/modprobe.d/nvidia.conf - nothing happened
  • adding Option "RegistryDwords" "PowerMizerLevel=0x2" "PowerMizerLevelAC=0x2" to xorg.conf under device section : gdm did not start up - had to delete xorg.conf to recover
  • adding Option "RegistryDwords" "PowerMizerEnable=0x0" to xorg.conf: nothing happened

Any idea how I can do this?

P.S. Ubuntu 12.10

Improve this question

2 Answers 2

Reset to default
8

You need to remove whatever you've added to xorg.conf, and add something like the following:

Section "Device"
  Identifier "NVIDIA GeForce"
  Driver     "nvidia"
  Option     "RegistryDwords" "PerfLevelSrc=0x3322; PowerMizerDefaultAC=0x1"
EndSection

PerfLevelSrc=0x3322 means it's going to use fixed PowerMizer mode when on AC.

PowerMizerDefaultAC=0x1 defines the power mode, with 0x1 being Maximum performance.

There is no need to reboot, just logout/login.

Improve this answer
5
  • 3
    Still goes back to "adaptive"
    – lfk
    Dec 25, 2012 at 12:57
  • Make sure the PowerMizer is enabled in the Nvidia Settings. If that still doesn't work, you might want to try PerfLevelSrc=0x2222 instead of PerfLevelSrc=0x3322.
    – mikewhatever
    Dec 25, 2012 at 13:14
  • Makes no difference. I enabled PowerMizer in nvidia settings and added the line to xorg.conf (tried both). Still once I log back in it is back to 'adaptive' in nvidia settings
    – lfk
    Dec 25, 2012 at 13:25
  • You are right, I forgot the "RegistryDwords" part. The above code has been corrected and tested, and should work. Let me know if it doesn't.
    – mikewhatever
    Dec 25, 2012 at 14:17
  • 1
    It worked! Thanks! The drop-down menu in nvidia settings is still on adaptive, but the performance level stays on 2 and doesn't change which means the code is working
    – lfk
    Dec 25, 2012 at 14:25
0

There is an unofficial patch for recent versions of the proprietary NVIDIA graphics driver (334.21 and 337.12) that writes GPU target attributes like GPUPowerMizerMode to the configuration file of nvidia-settings. That means you can use the NVIDIA X Server Settings GUI to permanently set your desired performance level just as it should be.

Improve this answer
1
  • the nvidia settings GUI is useless since graphics resolution is set so low cannot see/reach that part of the GUI window
    – Scott Stensland
    Apr 18, 2015 at 2:36

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .