Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

Hi. I've got a working Ubuntu 12.04 server, which is going to serve as media server. I've added two disks of size 3TB to put my data on, and I wish to combine these as one 6TB logical volume which I could mount under /media.

So far, I have created one partition on each disks with fdisk and formatted them to ext3. But now I am stuck on how to continue. Do I use Mdadm to create a Jbod array? Or do I use LVM to make a logical volume of these two disks? I can't seem to find the documentation I need, it's mostly about extending existing volumes or installing a fresh system which I don't need.

My OS is on /dev/sdc1 (it's a USB thumb-drive), and the two newly created partitions are on /dev/sda1 and /dev/sdb1.

Hope you can give me some directions.

share|improve this question

2 Answers 2

up vote 3 down vote accepted

You should have a look at this detailed answer.

Here's a summary of it:

  1. Create a physical volume on the first hard drive, and another physical volume on the second hard drive.
  2. Create a new volume group, assigning both physical volumes to it.
  3. Create a new logical volume in that volume group.
  4. Create a new ext3 filesystem in that logical volume.

The diagram I copied from this answer visualises this (but with three filesystems, rather than just one):

LVM schema

As you can see, creating an ext3 filesystem is the last step, not the first. If you have an existing ext3 partition that isn't in LVM, you can't migrate it to LVM. You'll have to backup the partition, delete the partition, setup LVM, and then copy the files back.

share|improve this answer
    
Very clear how LVM is working :) step 1 "pvcreate /dev/sda && pvcreate /dev/sdb" then "vgcreate data /dev/sda /dev/sdb" final step "lvcreate video". –  Hydrosine Nov 20 '12 at 23:26
    
Note that LVM is capable of striping data, but so is mdadm. mdadm can also do raid10, sacrificing space for redundancy so you can have a drive fail and still work without it. You can also use mdadm to handle the raid parts, then stack LVM on top of it if you wish, just to carve up the space into volumes and add abilities like snapshots. –  psusi Nov 21 '12 at 4:04

Don't do it, unless you've got another 2 3TB disks to use in a 4-disk array in RAID10.

Simply combining the two as a single large partition without any means of back-up of the data, is not a good idea. The data will be interleaved across both disks, and if any part of either disk goes bad, you could end up losing all 6TB of data (assuming you had that much data), rather than only half at most.

It'll be much safer to use both as separate partitions, rather than a very large array partition.

share|improve this answer
    
The data will not be very important. I know that if i create a JBOD i will lose all data if one crashes. but is this also true for a Logical Volume? I'm willing to take the risk of losing all data if one disk fails btw :) –  Hydrosine Nov 20 '12 at 18:17
    
Found some more about it. LVM is unable to initialize if one disk is missing. I'm going for 2 mountpoints /media and /media1. –  Hydrosine Nov 20 '12 at 18:48

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.