Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

I have an Acer Aspire One AO756-Series, equipped with a wifi controller Atheros Communications Inc. AR9462

Everything worked fine on 12.04, but when I upgraded to 12.10 I experimented some issues :

  • wifi does work!
  • still, the wifi icon/menu does not react normally :
    • it is always grey, hence not indicating if connected or not,
    • It does not react to me clicking on it (disconnect, change the network, desactive wifi, etc)

So it's not a critical issue because I can change the active wifi connection through control pannel, but it is very annoying.

Do you know of an solution around this issue?

share|improve this question

2 Answers 2

One solution with Acer V3 571G (card AR9462) is to configure the ath9k module with options: nohwcrypt=1

sudo nano /etc/modprobe.d/ath9k.conf

The file should contain this:

options ath9k nohwcrypt=1 blink=1 btcoex_enable=1 enable_diversity=1

After saving this modified file, do

rmmod ath9k
modprobe -b ath9k
share|improve this answer

Sometimes, spurious listings get added to /etc/network/interfaces during an upgrade. Network Manager assumes you will therefore be managing those interfaces; in your case, wireless, and not NM. Please check:

gksudo gedit /etc/network/interfaces

If there is anything more in there than this, remove it:

auto lo
iface lo inet loopback

Proofread carefully, save and close gedit. Restart NM:

sudo service network-manager restart

Now your wireless should be correctly managed by NM.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.