Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free.

I'm using a TP-LINK TL-WN781ND Wireless N card with an AR9285 chipset and an ath9k driver on Xubuntu 12.04.1 with Network manager.

'iwconfig wlan1' shows that it's using a bit-rate of 54 Mb/s. Is there a way (e.g. through an 'options' entry in '/etc/modprobe.d/ath9k.conf') of forcing it to use mode N? My router is doing 'Mode B/G/N Mixed'.

share|improve this question
If the driver supports it, you could try sudo iwconfig wlan0 modu 11n, and for the module options, have a look at modinfo ath9k. That said, there is probably a reason it uses 11g. Are there 11g only devices that connect to the router? If not, try disabling the mixed mode on the router. –  mikewhatever Oct 7 '12 at 22:42
The 'iwconfig' mechanism would probably break any existing connection set up by Network Manager. And 'modinfo' doesn't show any 'parm' parameters that look appropriate. So I've disabled mixed-mode on the router .. but that's likely to upset some of my visitors in the future. Any other suggestions? –  Graham Oct 8 '12 at 7:09
show us bitrate support: update with $sudo iw list –  j0h Jan 21 at 4:37

1 Answer 1

in the network-manager select your wirless connection and press the edit button . find the mode section and use the ad-hoc , then you are free to select your band and your channel .

if you want a more grafic way to see the channels and wireless info install wavemon

open a terminal and type

sudo apt-get install -y wavemon

you will need root or sudo to run wavemon

i hope this help you

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.