Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

How can I replace the Ubuntu branding with my own?

What files need to be replaced?

share|improve this question
2  
I'm not 100% on this, but apt-cache search branding should tell you what to change to make a rebranded respin –  hbdgaf Sep 28 '12 at 14:04
    
It helps a little thanks –  user61928 Sep 28 '12 at 14:24
    
you have to specify all locations –  user91632 Sep 28 '12 at 16:32
    
check this [link][1] and [this website][2] [1]: makeuseof.com/tag/customize-boot-splash-screen-logo-linux [2]: modifyubuntu.com –  user91632 Sep 28 '12 at 16:35
    
You want to modify the logo at Unity launcher only or everywhere? –  Anwar Shah Oct 1 '12 at 1:27

2 Answers 2

If you just wanna change the look of Ubuntu then check Super Boot Manager

If want to customize your distribution use relinux

  1. get the latest version from here

  2. The archive file contains two folders and an installation guide; the two folders must be merged with the original etc and usr folders. Change into the directory you unpacked the two folders to, in my example it is the /home/MYUSER/Downloads folder:

    cd /home/MYUSER/Downloads

  3. Copy the downloaded folders to the original ones:

    sudo cp -R usr /

    sudo cp -R etc /

    Relinux should now be properly installed. You can find further documentations in the /usr/share/doc/relinux/README file.

  4. Install Software

    To create yourself a unique distributable Ubuntu DVD you need to install the software you want on it on your current system. Do this by opening Synaptic Package Manager and use the search bar to find the packages you want to install. Click the checkbox right next to the package and select Mark for Installation.

    Most packages will need to install more packages they're dependent on, you will need to Mark those too.

    After you have selected all the packages you want, click the Apply button.

    All software you have installed on your current system will later automatically be transferred to the iso-image of you DVD. Make sure that the content you want on your DVD does not exceed the size of 4GB! Otherwise Relinux will not produce an .iso file out of the filesystem

  5. Use Relinux

    Relinux uses a config file for every command which you better edit before you use the program for the first time. Leave the original config as backup and create a new one in a specified location (I'll do it in my personal folder):

    cd /home/MYUSER
    cp /etc/relinux/relinux.conf ./relinux.conf

  6. Next direct Relinux to the new configuration file:

    sed -i 's:EXCLUDES="\(.*\)":EXCLUDES="\1 'readlink -f ./relinux.conf'":g' ./relinux.conf

    It is highly recommended to have a look at all the options in the config file and adjust them to your liking. If you do not exclude enough files to bring the squashed file system to a maximum of 4 GB, Relinux will not create an image out of it. Additionally there are other helpful options like the choice of a boot splash screen or the naming of the actual image.

    Relinux' actual control is only possible through the command line. It generally has the same options as Remastersys at the moment except for the lack of an explicit backup command, which however can be accomplished by not excluding the home folder:

    • sudo relinux clean [configfile] - Cleans the working directory of unimportant process stuff

    • sudo relinux fullclean [configfile] - Cleans the working directory completely, including the .iso image, the checksum and all other files

    • sudo relinux squashfs [configfile] - Creates the squashed file system to build the iso-image out of. This is the necessary step to take before actually creating an iso-image. This can also be used to retroactively add files to the file system before creating the images
    • sudo relinux onlyiso [configfile] - Creates the actual iso-image which can be used in a virtual machine or burned on a CD to boot your custom system from (before choosing this option a file system must have been created using squashfs)
    • sudo relinux iso [configfile] - Creates the squashed file system and the .iso image in one command

    Since you most likely want to use the image you create for burning it on a DVD you should pay attention to the summed size of software and files you add to it.

    Every file created with Relinux will be placed in its temporary directory, which by default is /home/relinux. That counts for filesystems as well as for images (e.g. custom.iso by default). Be sure you move your image to some other place since this temporary folder will be emptied on the use of fullclean.

  7. Add Files to a Non-Backup Filesystem Without home-folder

    If you have a home folder that is to large to put it on a DVD but still have files that need to be on the image, there are two ways you can put them on it; one has to be dealt with before you create the file system and one that can also be done after it has been created.

    a. /etc/Skel Folder

    To add files to your non-backup image before you create the file system, just put them into the /etc/Skel folder to let the files appear in your home folder on the image afterwards. The /etc/Skel folder is responsible for populating the home folder on every installation and every adding of a new user.

    b. Squashfs-tools

    Squashfs-tools is package that allows you to build and uncompress but also to add files to squashed filesystems, which are also used to build the filesystem on Remastersys and Relinux. They can be used to append files to already created filesystems. Install them by entering the following into a terminal:

    sudo apt-get install squashfs-tools

    The squashfs-tools offer two commands to use, one to create filesystems or add files to existing and one to uncompress them. The first one is

    mksquashfs

    And its basic structure is the command followed by one or more source files or folders and the path to the squashed file (e.g. mksquashfs /home/MYUSER/Desktop/bla /home/MYUSER/Desktop/ultimate.squashfs).

    The last folder in the path of the source file will be the root of the squash filesystem unless you specify otherwise with an option, meaning it will not be directly displayed itself.

    The same command is also used to append files to existing squash filesystems, which is what we basically want.

    To do so, just pick the existing filesystem as the filesystem to create and the files to append in the input files' path.

    Unfortunately, it is not possible to merge the two filesystems, which is why we circumvent this problem by creating a folder called extrafiles (could be any name) in any folder and choose this upper folder as the one to add to the system (it will become the root folder and the folder inside, the one we want, will be displayed along the files in the filesystem's root folder).

    Add the files you want on your DVD to the extrafiles folder. Following would be a possible way to add files to the filesystem:

    mksquashfs /home/MYUSER/Desktop/bla /home/remastersys/remastersys/ISOTMP/casper/filesystem.squashfs

    In this example the folder bla is the one containing the extrafiles folder.

    See the man page for further switches and options.

    To uncompress a squash filesystem, use following command:

    unsquashfs

    The most common way to use this command should be combined with the destination switch. Make sure to choose an unexisting directory as destination since it will give you an error otherwise.

    unsquashfs -d /home/MYUSER/Desktop/unexistingdirectory /home/remastersys/remastersys/ISOTMP/casper/filesystem.squashfs

share|improve this answer
    
Where could i change logos?! –  user61928 Oct 10 '12 at 6:45
    
I need for the whole distro not for start-here only –  user61928 Oct 10 '12 at 6:54

OK after searching through the Linux file system, i found few files (logos) which can be replaced to prevent copyright violation.

All the files resides in

    /usr/share/icons &
    /usr/share/pixmaps

File names to replace are (All files are in png or svg file format)

    start-here 
    distributor-logo
    ubuntu-logo 

I will add more names if i will find in future. Also edit these files as per your requirements /etc/issues.net /etc/lsb-release /etc/issue

but then you have to edit /usr/share/pyshared/aptsources/distro.py

and assign values of original lsb-release file to variables like

   self.id="Ubuntu"
   self.codename="precise"
   self.description="Ubuntu 12.04.02 LTS"
   self.release= 12.04
share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.