Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

Okay this is my problem. I have a Pantech Link II, dmesg states:

[  896.072037] usb 2-3: new high-speed USB device number 3 using ehci_hcd
[  896.258562] cdc_acm 2-3:1.0: ttyACM0: USB ACM device
[  896.260039] usbcore: registered new interface driver cdc_acm
[  896.260042] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters

Have it installed through wine (pc suite and driver) and it doesn't see it. Virtual XP through VMWare Player sees my device, knows it needs a driver. The removable devices says Curitel Pantech USB Device (Maybe Driver). I have PC Suite installed in XP, I install the driver through the executable.. it says problem with installing hardware, and then it disappears. Ubuntu sees it after restart, but if I start XP with that driver installed, it disappears from both and I get these errors in dmesg:

[ 1047.760555] /dev/vmmon[2882]: PTSC: initialized at 3093322000 Hz using TSC, TSCs are synchronized.
[ 1048.174033] /dev/vmmon[2882]: Monitor IPI vector: 0
[ 1055.293060] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0)
[ 1055.293074] /dev/vmnet: port on hub 8 successfully opened
[ 1055.293088] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0)
[ 1055.293094] /dev/vmnet: port on hub 8 successfully opened
[ 1072.446305] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0)
[ 1072.446316] /dev/vmnet: port on hub 8 successfully opened
[ 1072.446328] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0)
[ 1072.446334] /dev/vmnet: port on hub 8 successfully opened
[ 1072.856024] usb 1-1: reset high-speed USB device number 2 using ehci_hcd
[ 1079.292024] usb 1-1: reset high-speed USB device number 2 using ehci_hcd
[ 1079.732024] usb 1-1: reset high-speed USB device number 2 using ehci_hcd
[ 1127.743034] NET: Registered protocol family 39
[ 1127.749320] [3163]: VMCI: IOCTL_VMCI_QUEUEPAIR_ALLOC (cid=1522210225,result=4).
[ 1144.104031] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
[ 1144.412031] usb 2-3: reset high-speed USB device number 3 using ehci_hcd
[ 1155.889976] ehci_hcd 0000:00:13.2: force halt; handshake ffffc90000642024 00004000 00000000 -> -110
[ 1155.889980] ehci_hcd 0000:00:13.2: HC died; cleaning up
[ 1155.890008] usb 2-3: USB disconnect, device number 3
[ 1155.890013] usb 2-3: usbfs: usb_submit_urb returned -110
[ 1658.310777] [3163]: VMCI: IOCTL_VMCI_QUEUEPAIR_DETACH (cid=1522210225,result=3).
[ 1658.392018] NET: Unregistered protocol family 39
[ 1666.546438] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0)
[ 1666.546450] /dev/vmnet: port on hub 8 successfully opened
[ 1666.546462] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0)
[ 1666.546467] /dev/vmnet: port on hub 8 successfully opened
[ 1671.431383] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0101)
[ 1671.432533] input: USB2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input13
lessa@X:~$ dmesg|tail
[ 1155.890008] usb 2-3: USB disconnect, device number 3
[ 1155.890013] usb 2-3: usbfs: usb_submit_urb returned -110
[ 1658.310777] [3163]: VMCI: IOCTL_VMCI_QUEUEPAIR_DETACH (cid=1522210225,result=3).
[ 1658.392018] NET: Unregistered protocol family 39
[ 1666.546438] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0)
[ 1666.546450] /dev/vmnet: port on hub 8 successfully opened
[ 1666.546462] /dev/vmnet: open called by PID 3163 (vmx-vcpu-0)
[ 1666.546467] /dev/vmnet: port on hub 8 successfully opened
[ 1671.431383] uvcvideo: Found UVC 1.00 device USB2.0 Camera (1871:0101)
[ 1671.432533] input: USB2.0 Camera as /devices/pci0000:00/0000:00:12.2/usb1/1-1/1-1:1.0/input/input13

I have tried uninstalling, and installing manually from the device manager update driver while it's still has the warning sign.. it doesn't see the drivers as valid. No idea how to fix this.. would prefer to not have to go to another computer. I'm not trying to do anything but get the pictures off of it. I have to restart ubuntu, plug in device, for ubuntu to see it correctly again. I am like a month and a half old linux newbie so I have no idea the commands I could use for this, and I don't have a memory card in the phone to mount.

share|improve this question
    
Can I ask why you're using an XP virtualI do it all in Ubuntu, and haven't used XP for this. I plug my Pantech Link II into my computer's USB port and Ubuntu detects a new removable device. It opens up Nautilus file manager. I open up a new Nautilus tab, choose my Pictures bookmark, and I copy my photos from the Phone tab to the Pictures tab. Can you see where the photos are stored on your phone? –  Michael McGinnis Oct 6 '12 at 16:00
    
I have the same problem copying stuff to a USB stick –  Frank Barcenas Mar 9 '13 at 22:09

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Browse other questions tagged or ask your own question.