Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

Trying to install opsview onto lucid. However, I'm not sure of the exact commands to run after altering the /etc/apt/sources.list file. What commands are necessary after that?

share|improve this question
add comment

3 Answers 3

If you have already added the repository and GPG key.Skip to step-2 and execute the commands in your terminal to install opsview,

Adding repository:
Step-1:

  • Edit sources.list to add the repository

    sudo gedit /etc/apt/sources.list

  • Add the below line to your sources.list file,

      deb http://downloads.opsera.com/opsview-community/latest/apt lucid main
    
  • Now to add the GPG keys,execute the following commands in your terminal,

    sudo gpg --keyserver subkeys.pgp.net --recv-key 77CB2CF6
    sudo gpg --export --armor 77CB2CF6 | sudo apt-key add -

Installing opsview:
Step-2:

  • To install opsview type the following in your terminal,

    sudo apt-get update
    sudo apt-get install opsview

Note:

  • For more information see this page.
share|improve this answer
add comment

For Opsview community edition:

Add the appropriate repository. AFAIK only LTS versions are supported. For Lucid 10.04 this would be:

deb http://downloads.opsera.com/opsview-community/latest/apt lucid main

Import the GPG key for this repo:

sudo gpg --keyserver subkeys.pgp.net --recv-key 77CB2CF6
sudo gpg --export --armor 77CB2CF6 | sudo apt-key add -

Then you should be able to install opsview from CLI as karthick87 already pointed out. You can also use Synaptic for both, updating your sources list, and installation in case you are more compfortable using a GUI.

For Opsview enterprise edition please ask for support from Opsera.

share|improve this answer
add comment

The answers listed here are no longer relevant if you're looking to utilize the new version of opsview labeled 'opsview-core'.

Opsview core removes SNMP Trap processing, distributed monitoring capabilities, master-slave monitoring capabilities, and more.

For information on how to upgrade, please see the opsview wiki article here: http://docs.opsview.com/doku.php?id=opsview-core:upgrading:upgradetocore

For information on how to install the newest opsview-core: http://www.opsview.com/technology/downloads/opsview-core

You have 3 options - VM appliance image, Server installation, or EC2-image installation.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.