Take the 2-minute tour ×
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It's 100% free, no registration required.

I'm trying to get 12.04 LTS 64-bit up and running on a Dell PowerEdge T300 Server with the Dell SAS 6/iR RAID controller (LSI SAS1068E chipset).

Ubuntu installs just fine, doesn't report any errors, sees the RAID mirrors as drives, everything seems normal, but fails to boot up after the installation. It reports no boot device. The /boot partition is on /dev/sda1 and is marked as bootable, and when I installed Ubuntu, I told it to install grub to the MBR.

Any suggestions for what I should check next?

share|improve this question

1 Answer 1

I have a similar problem with a Dell PowerEdge SC440 with the Dell SAS 5 controller. I wanted to upgrade my hard disks from 2x160 GB in RAID-1 (mirroring) to 2x2TB in RAID-0 (striping). Creating the "virtual disk" worked, installing Ubuntu as well, but after rebooting the BIOS doesn't recognise the "virtual disk" as a bootable device.

So, in my case, the problem is not with OS installation, but with the SAS and BIOS "integration". In the Setup Utility, under Boot Order, you should see an entry with something like (in my case) "#0240 ID00 LUN0 Dell VIRTUAL". If you don't see this, the problem is not with Ubuntu, but with SAS/BIOS.

I got things working by reconfiguring the drives in RAID-1. The BIOS then picked up the virtual drive and booting works.

Sorry I don't have an immediate solution for you, but I hope it helps troubleshooting your problem.

Cheers, bert

share|improve this answer

Your Answer


By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.